Software
Houzz Logo Print
thoada21

Help with range top install in existing cabinets

10 years ago

Hello all, I had a question about a range top install in existing cabinets. We purchased a house about 3 months ago and are planning to replace the current electric drop in cook top. I have purchased a Viking
30” gas range top and am trying to decide how to install in my existing cabinets. From the research I have done I’ve seen two ways. One way uses a “bracing” around the perimeter of the inside of the cabinets and the cook top is supported
by this bracing only on the perimeter with the majority of the space underneath the cook top open and unsupported. The other way used a “platform” that supported the whole cooktop with notch outs in the rear for gas and power connections. The Viking
installation manual is very vague about the actual installation of the cook top or how it should be supported. I looked at some other manufactures instructions. Wolf was about as vague as Viking. Dacor did mention the use of a platform. I wanted some opinions
on which way to go. I would think the platform would be better as it is supporting the whole base of the range top. My concern was I didn’t know how much heat would be dissipated down into the platform. My other concern was securing the range top. Again, Viking
made no mention of securing the top in the cabinets and I am not sure how I would/should accomplish this. The bottom is completely flat sheet metal. It has no feet. The Dacor did mention it had predrilled holes for securing it to the platform.
Again I would think it should be secured in some manner. Or is the weight of the cook top and cast iron grates (about 130lbs) enough to keep it from tipping? I appreciate any insight.