Software
Houzz Logo Print
hzdeleted_21902377

$1200 ea bathroom remodels completed

9 years ago
last modified: 9 years ago

I do my own tile work and bargain shop. DH works for a sub contractor, gives me advice and oversees the remodel doing anything technical (most of the work really). :0)

#1

#2

The before cabinets were 1980's dark oak,like these in my kitchen & linoleum floors.

Price list:

Granite slab counters: Restore $18 & $15(cut with a grinder & polished w/ pads)

Vanities: Restore Claxby/48" $240, HD, Claxby/30" $270

Clear Glass Sliding tub doors: HD $225(They take competitors coupons, I got a discount)

Solid color floor tile: HD .49cents a sq ft(I cut the tile to get different patterns)

Accent tile/metal/glass/travertine: HD $7.99 sq ft

Hardibacker, Durarock, grout, Mastik, screws, schleuter: HD

Bootz & American Standard Tubs, Kohler & Vigo Faucets, towel bars: Ebay & HD

Mirrors: picture frames from thrift store, using the old slab mirrors in them

Comments (16)

  • PRO
    9 years ago

    I have the same granite as the one on the small vanity in combination with a vessel sink . It is a nice combination .


    But ,

    '' Hardibacker, Durarock, grout, Mastik, screws, schleuter: HD ''

    Not really sure what you are trying to say with/use Mastik ?

    User thanked User
  • 9 years ago

    Eurocerob....The granite is Juperana Bordeaux. I misspelled Mastic. Mastic is used to adhere tile to the shower walls. It's just a list of materials.

  • 9 years ago

    Beautiful!

    User thanked cat_mom
  • PRO
    9 years ago

    you got a deal!

    User thanked Avanti Tile & Stone / Stonetech
  • 9 years ago

    How's that first sink work out for washing up all the way in the corner like that? Seems a little unusual.

    User thanked hoovb zone 9 sunset 23
  • 9 years ago
    last modified: 9 years ago

    hoovb....it's fantastic! Leaves me counter space. I can set a blow dryer, curling iron, makeup...it all fits on the counter.

  • PRO
    9 years ago

    careful with hot irons on the counter... its $1200 to replace it !

    User thanked Mint tile Minneapolis
  • 9 years ago
    last modified: 9 years ago

    Tundra...thanks for the warning. Granite is pretty tough. Have you seen the Home Depot granite tops? $230 ea.


  • 9 years ago

    Well Mastic to adhere tiles to anything that isgoing to get wet is a BIG nono, you WILL have trouble down the road. Sorry, as the experts here, they will tell you .

    User thanked Patricia Kuehne
  • 9 years ago
    last modified: 9 years ago

    OK....it's NOT mastic....it's actually called AcrylPro. It's made for this application. Yes...I know what I'm doing...just sitting at home in my nice warm bed...not on a job site where I can copy the bucket information. I was sloppy in my material list...and I can't edit it an hour after posting....

    For the floors I a use a powder, purchased in a large bag that has a little elasticity to it....can't remember what it's called either...That really was not the purpose of my thread. I really think people should RETHINK using bright ...fancy....loud tile in their remodels. A rug can be thrown down later and changed. Tile is a lot more permanent! My designs are not BLOWING anyone away. I understand. I hope I'm giving someone permission to be boring....:0)

  • 9 years ago

    Your picture says it all: type 1 adhesive. This is mastic, not thinset. You may or may not have problems with it down the road. I would be more worried if you had used it in a shower and not a tub surround. But anyone reading this thread and contemplating tiling a shower or tub, it is beneficial for them to know the correct product to use, which is NOT mastic. Mastic is fine for backsplashes, or even the wainscoting outside of the shower/tub area, but it should never be used in a wet area. It's easy to tell the difference: anything that comes premixed in a bucket is mastic. And it's really not difficult or time-consuming to mix up thinset, and it's much less expensive than mastic.

    User thanked catbuilder
  • PRO
    9 years ago

    As far as the AcrylPro goes, is it in a bucket? Is it premixed? THEN IT'S A MASTIC! It has NO place in a wet environment....OR floors, irrespective of what it might say on the label. It will re-emulsify in the presence of moisture. It's twice the price of a bag of Versabond, as well! I use the mastic for backsplashes...and it works well there.


    While you're at the Big Orange Store, don't be tempted by anything in a bucket that says "Premixed Thinset." No, it's still mastic with some sand thrown in. Real thinset is inna dry bag and must be mixed. Choose wisely.

    User thanked Avanti Tile & Stone / Stonetech
  • PRO
    9 years ago
    last modified: 9 years ago

    CBP say right in the PDF its ok for areas with intermittant water use? how confusing for the DIY set huh ? why would they promote it in such a way as everyone in the tile industry says differently inculding chemists understanding of Calcium chalk content and low acrylic percentages.....????? what a mouldy ooze of a mess re-emulsification is when it arrives.....

    User thanked Mint tile Minneapolis
  • 9 years ago
    last modified: 9 years ago

    Versabond is what I used for the floors...yes it is cheap and easy to mix. Didn't know the bucket was "bad". Good to know. I own the home, here a home owner can pull their own permit.

  • 9 years ago
    last modified: 9 years ago

    My DH says Versabind is concrete and the durarock is concrete. He sees where your line of thinking is, but says concrete is miserable to work with. He also says I sealed the grout with Hydrex for the fancy row and a 3M grout sealer. I can put a coat of Hydrex on it? Any thoughts on that?

    Getting ready to tile the kitchen floor with a porcelain tile that matches the Sienna Rope cabinets....using Flexbond and hardibacker.