skip to main content

Pentair minimax heater problem

ladybug A 9a Houston area

9 years ago

Turns on, but the air coming out o n the top is cold and spa wont heat. It was fine a couple of months ago and just stopped working, anyone know what the issue could be?

Thanks!!

Sort by:Oldest

Comments (2)

ladybug A 9a Houston area
Original Author
9 years ago
Anyone with some advice? Thanks!!
PRO
POOLS WORKS
9 years ago
Get access to the ignitor. Should be towards the bottom left. You will see two white wires goign into sheet metal with a black colored bushing. Make sure the power to the heater is off. Disconnect the ignitor at the connector and use a ohm meter. If it shows no Ohms then you have a bad ignitor. Could also be as simple as not enough gas pressure.
ladybug A 9a Houston area thanked POOLS WORKS
Related Professionals
Macon Landscape Architects & Landscape Designers · Middlesboro Landscape Architects & Landscape Designers · College Station Landscape Architects & Landscape Designers · Jacksonville Landscape Contractors · Terre Haute Landscape Contractors · Southaven Landscape Contractors · Cincinnati Landscape Contractors · Charleston Landscape Contractors · Saginaw Landscape Contractors · Saint Cloud Landscape Contractors · Owensboro General Contractors · Natchez General Contractors · Murfreesboro General Contractors · Boston General Contractors · Sarnia General Contractors

0

Sponsored

AIS Renovations

15 Reviews

Custom Craftsmanship & Construction Solutions in Franklin County, Ohio

More Discussions

Claude vs. Chatgpt - which pool tile choice?

8

spa cover recommendation

0

How high is the pergola above the pool deck and above the plunge pool?

1

so over pool pavers….

10

Black eclipse Pebble Sheen, maintenance and heat

3