You install what ever faucet you like the cabinet does not dictate faucet I install what ever faucet I like with these all the time

It is not a problem to use your own faucet with Godmorgan vanities. It just becomes an issue with plumbing if you choose your own counter tops, but still possible.

I am planing on using a different counter topped sink. I would appreciate the advice, measurements or band you would recommend.

thanks

I want to use the Vigo Noma faucet with the Odensvik sink & the corresponding pop-up drain. I plan on changing the Rinnen drain trap so I just need to know if it will fit in the hole. Does anyone know the measurement of Odensvik's sink hole? thx

I bought a Godmorgon vanity, got a quartz counter top and Kholer 1-1/4 drain drap. The contractor is now saying it doesn’t work. Does anyone know any hacks ?

Norma you will need to make the top drawer into a false front and have only the bottom drawer functional. The reason it works with an IKEA sink is twofold, first most of the depth of the sink is concealed in the counter (it doesn’t exist in the cabinet), secondly the IKEA drain comes off the sink 90 degrees and goes to the back of the cabinet, the p trap is against the wall.

Norma R I had the same problem. Our builder wanted to make the top drawer have a false front. I almost went for it because we had 3 Godmorgan vanities put together and had lots of storage.

Our genius trim guy said " Don't do that. I can just cut out around the pipe then you have a usable drawer." That is what we did. I will have my husband take a picture to show you.

Here is what he did.

Norma R- As Linda said you can just cut around the drawer or as many have done, or do a serious hack & save the drawers completely. There are many videos & pics online. It requires cutting the drain & pivoting the trap to run parallel to the wall. Here's 1 https://www.youtube.com/watch?v=iG0Sv69Vtow