Software
Houzz Logo Print
kissey

Best Gaggenau set up?

9 years ago

I have plenty of room in my new home construction of my kitchen. Last house I will build so I am going for the Gaggenau ovens and probably cooktops. I am pretty convinced to go for the 36" induction and 36" gas on the island - I have 14' island. The question is ovens. Should I get a double oven and next to it a steam and warmer, or a single oven next to a steam and warmer? Yes, I intend on partying.

Comments (10)

  • 9 years ago

    With no budget limit, I would look at these gaggenau model for island:

    • Full surface CX480
    • Vario gas wok VG414
    • Vario treppanyaki VP414
    • May be Vario electric grill VR414
    • May be Vario gas VG424
    • Table ventilation AL400
    • Vario downdraft VL414

    And for oven, these combo would be good:

    • If you want double oven BX480/481
    • If you want single oven BO480/481
    • Combi steam oven BS484/485
    • Speed oven BM 484/485

    If there are enough oven space, warming drawer is not necessary, but there is extra space, go for it.

  • 9 years ago

    Your island configuration recommendation was almost exactly what I had originally thought of, minus the ventilation. I am going to go ahead with an island hood. I bought a 2 burner portable induction for a boat and I am not crazy about it. With all the reviews I am sure I will like a better brand more (hope hope). Gas is just easy for me though, especially for wok. I lean to a 5 burner gas with the wok in the middle because I thought you could put a teppanyaki griddle over the induction??? I go back and forth.

    I hadn't even thought of a speed oven. The main reason for the warming drawer is because I am building an outside pizza oven and thought they were good for proofing dough.

    Thanks for the advice. We aren't made of money, but I lived in Central America and the like for years and feel I deserve to splurge.


  • 9 years ago

    Portable induction can show you how the pot heating rather than the stove works, but it's usually underpowered and doesn't have sufficient number of heat levels to give you an easy experience cooking

    I have a seven year old Gaggenau 24" induction from Europe, and I LOVE it. It's basically the same as the 36" unit they were selling here at the time, but 2/3 of it. Plenty of power, great ease of use. Love the magnet knob.

    The two cooktops you've described may be the most cost effective. The Vario units are expensive, and I backed out of getting them when there was a huge price jump. OTOH, you might be very happy with something like the Vario 400 two burner gas or induction, gas wok, induction+wok unit and teppanyaki. Or do you really need ten pots going at once? I have the three element induction and a Wolf two burner gas and rarely have more than 3 pots going at once. I think I did have five going once, but usually four is the maximum, and that's for feeding dozens with multiple courses.

    Maybe you need to use an installed induction unit a number of times to see how you like the real thing?


    I wouldn't pay Gaggenau prices for a speed oven or warming oven. They won't do anything that a less expensive brand wouldn't do as well or better, and we're not into badge matching to look like the builder got a discount here. :) I originally thought I had to have the Gaggenau warming drawer because only a few had the features I wanted, and Gaggenau had the open sides. That was another idea that flew when the price jump happened, but I'm very happy with the Monogram I got instead. It has the correct temperature range for my purposes (the most important feature) the moist (closed) or dry (open) vent lever, and I wasn't worried about looks because it took a custom panel front to match the cabinets. I got the Advantium 240V for a speed oven, because that's the one with fully implemented speed cooking (big learning curve on that) and it also works well as a plain convection oven.

    The combi-steam oven is wonderful! I would have liked to have the ovens side by side for utility, but it really needed another inch or two between door and window. Stacking also made more sense because they're meant to be stacked with the controls lining up in the middle. I thought it might look stupid next to each other. Your plan with the warming drawer might look better, however, and might be a reason to get the Gaggenau to match.

    BUT

    You can rise bread in the ovens (check the manuals for your models--my regular and combi-steam both have settings for it), and usually the best place in a kitchen layout for the ovens is off to the side and out of the way, since one doesn't generally do a lot of back and forthing with an oven the way one does for a cooktop and sink. That's the worst place for a warming drawer.

    The best location for a warming drawer is either next to or under a cooktop or near the table, or somewhere in a straight path between. At the stove is for receiving pots to keep warm (though you can also do that on the low induction setting), to gather baskets full of pancakes, etc., to all sit down together, or to put the various pots in for dishing up. Near the table makes keeping serving dishes warm easy. In between is a bit less convenient for either but right in the traffic path so useful to both. Off to the other side with the ovens is just inconvenient for everything and makes it little used.

    Warming drawers also get the best use if they're at counter level or below a utensil drawer, rather than low.

    In all, I think the best thing for you to do is go to a showroom where they're installed and play cook for awhile, or if they're live, cook for real. Also, read through the manuals off the Gaggenau site, and the blog at Purcell Murray (California distributors) and try to get a sense of how the pieces work and what they can do. If you're in California, definitely make an appointment at Purcell Murray to see, and maybe take in some demos.


  • 9 years ago

    Apologies! I hadn't looked at the brochure for a couple of months. The new combi- with the controls on top would look fine next to the regular oven. The picture on the site with the combi and warming drawer concerns me, however. It might just be because of lack of context, but that looks like the shallower drawer, that's meant for warming coffee cups, rather than the deep one for the bread, but even more I don't like the temperature range. Ideally the temperature should go down to 85° F. for plate warming (rather than heating) and slow rises, and up to at least 210° F. for warming dense foods in heavy pots. The range they show is adequate, but not idea, in my opinion.


  • 9 years ago

    I don't really need 10 pots going at once, but when you look at the cost, it makes sense to just get both 36". We are building on the lake and will probably have multiple cooking parties too.

    I wish I could get 30" full induction and a wok plus 2 burner gas more reasonable. Maybe I should look for different brands.

    Thanks so much for the warming drawer advice. Makes sense. I am completely moving it to accommodate for my famous Sunday pancakes and dishes. I am going to certainly look at different options for heating as well.

    As far as the speed oven goes, I like the idea of the oven inside my triangle work area and accessible to others without getting in my way.

    I live in Missouri, not much of showrooms around here. I haven't found one person who knows what Gaggenau is... I didn't either until I started building. It's hard to plan a house when you don't have anyone to bump ideas off near by. I might head up to St louis next week. Thanks for the insights

  • 9 years ago
    last modified: 9 years ago

    It seems you're adding gas based on your experiences with the limits of a 120v portable induction unit. A 36" Gag is 220v, a much higher performance level. You can do the in store demo and maybe that's all you'll need to see the difference. I don't think you need the gas. Heston Blumenthal has only a 36" Gag induction for his kitchen and he uses induction for his restaurants. You can see it in this video on potatoes.

  • 9 years ago

    I would reconsider putting the induction on the island. I would if you post your kitchen plan in the kitchen forum as they are great with kitchen layouts.

  • 9 years ago

    If you're large-crowd party cooking, 2 ovens. And two DWs, one higher-end and one lower end for overflow and pots/pans.

    My friends who built their house for the large parties they threw all the time (clients) went Wolf, but the bit they liked the most was the extra DW. And so did the caterers.

  • 9 years ago

    I totally agree with Chanop, and I understand about the full sized
    cooktops vis-a-vis budget. Since you have the room and the ventilation,
    there's no reason not to. I was just looking at something that might
    be more convenient and pretty. If "cooking parties" means a whole crowd
    making all different things, having the gas to give those less used to
    your induction to cook on and using the induction yourself (lucky you)
    makes a lot of sense.

    Having alternatives at a lake house also
    makes sense if one or the other fuel is out because of weather, gas
    leaks, etc. It's more important that you be able to cook (perhaps can't
    just drive a mile to go to a nice dinner away from the outage like in
    the city).

    Also, however, you might want to check out servicing if
    no one there knows Gaggenau. Is there someone who can drive out to
    you? Perhaps a Bosch/Thermador repairman (they're sister companies).
    Do think hard before putting in a whole kitchen with no repair available.

    Is there a word missing from this or wrong? As far as the speed oven goes, I like the idea of the oven inside my
    triangle work area and accessible to others without getting in my way.

    Speed
    ovens have a learning curve, though Miele makes one that has Master
    something programming that lets the oven do most of the thinking.
    Still, I think you need to know how to use it to make it work. The
    Advantium, which I have, is easy to use but no one can make it work
    without instructions. Period. The closest is for microwaving, one
    could put a sticker by the button that turns it on in multiples of 30
    seconds. Do be sure that it's going to function for you the way you're
    imagining. Read through the manuals carefully, and pretend to do some
    common tasks, even if you're just doing it on the computer.

    By
    "30" full induction" do you mean "full surface"? Because, if so, you
    need to know that it's something of a gimmick. You'd still only have
    four cooking zones.

    You can mix and match brands. Wolf has a good
    gas wok burner. I have the two burner 15", which has a small and
    medium burner. They're good for my purposes, but it was hard giving up
    the two large burners of the 15" Gaggenau. They can do that because the
    controls are on the cabinet apron rather than the cooktop. Do pay attention to Chanop's--who uses woks regularly--advice about checking into induction wok units.
    That's the dished kind that you can use with a carbon steel wok. The
    Gaggenau unit is a very powerful flat induction with a special stand and
    stainless wok with handle. It's supposed to work very well, but if
    you're accustomed to handling a traditional wok it would be quite
    different. The big difference with the dish style induction is that
    there is no rising fire heat underneath heating the sides of the
    wok--they get their heat through the pan from the bottom--or heating it
    while it's lifted. When you lift, you bring the pan/wok out of the
    induction field which is only about 1/4" high. They use dished
    induction with woks all over Asia. If you just use the wok now and
    then, however, the high heat burner in the gas cooktop should be fine.