Software
Houzz Logo Print
michael_anders3068

Moving Sprinkler Head

13 years ago
I just bought a townhouse in a starta building in Vancouver, BC. In my renovation ideas, I need to move a sprinkler head which is on a wall. Can anyone please advise how difficult or easy that is, and what is required? I realize I will need permits and permissions etc.

Comments (12)

  • 13 years ago
    Hey Michael! I'm a bit confused. You have a condo (strata) property, and you want to move a sprinkler... is this a fire sprinkler? Can you post pictures for the pros so they might be able to help?
  • 13 years ago
    last modified: 13 years ago
    It is a sprinkler head, for the sprinkler system. See attached. I realize I need approval and I realize it has to be approved etc etc. But I dont know if doing that is generally a simple thing (like moving location of tap) or a much more difficult thing. For example, does the systems water have to be shut off for the whole complex ?? And yes, the unit has large steel pipes for that system. The sprinkler head is in a location on the wall where I want to put more cabinets. I know it can be done, just wondering what is involved.

    Thank you for you assistance.
  • PRO
    13 years ago
    Michael, The wall needs to be torn open and the run of pipe figured out. The determination of whether or not it can be moved will happen when it is examined and the original plan examined to boot. If it can be moved, a preliminary set of pipes will be made up, including any fittings...The water to the entire system will need to be shut off and drained. The pipe work will need to be done and the water turned pack on ( the building department may require a system air pressure test...they do here). Drywall repair, painting and clean up.
  • 13 years ago
    Thank you. that was very helpful. Once I start the renovations, I will have to figure that out.
  • 13 years ago
    Michael, very interesting dilemma. Please post photos of your progress. :)
  • PRO
    13 years ago
    Michael, Your plumber will be a good source of advice on this!
  • 13 years ago
    I'll let you guys know what I learn.
  • 13 years ago
    Hey guys, and update. You will see in the photo the orange piping and the sprinkler heads in this bulk large buld head. I am looking to reduce the size of the bulk head, thus need to move and reduce some of the sprinker head. We have applied for a permit from out city. I will let you know how that goes and next steps.
  • 13 years ago
    there are "recessed sprinkler head" for special areas where you do not want to see things hanging from the ceiling, you will require a certified sprinkler contractor who can tell you what the bylaws are in your area. Moving water/fire lines in a condo requires co-ordination an may result in turning off the whole building for a short period of time, again your sprinkler contractor will advise you.
  • PRO
    11 years ago

    You will have to have access to the fire control panel to disable the fire alarm, then isolate and drain the sprinkler piping before the head can be re-located. The sprinkler code will determine where the had has to be moved to. A sprinkler contractor can do all of these things. There will be a separate sprinkler permit required along with your plumbing permit.

  • 9 years ago
    Hi,Micheal, how is the result of your relocating for the fire sprinkler head. I face the same problem in richmond BC. Do you have any contractor to refer? Many thanks