Eastlake...dresser, probably maple...might be oak. The gaps between the drawers are where the rails have worn away with use....
Nice piece....the hardware won't be easy to find but it can be done.

It's for sale for 85.00. Is the missing hardware something with ring pulls or drop pulls?

Probably ring pulls....or maybe those ring pulls are hiding evidence that it had two hole pulls....but probably not.
Unless there is something drastic that the picture doesn't show, $85 is a helluva deal....

NSM, I expanded the pic in Paint, and it looks like the drawers are opened slightly, which may have caused the dark line look between them. Wouldn't it be nice if the seller has the missing drawer pull inside the drawer!

Make sure they close all the way, as they could be a bit warped. The pulls are unusual; you may have to replace all of them, unless you put one on the bottom drawer and find knobs for the top drawer to blend in.

Good luck! You always have nice finds to show us!

The two bottom drawers are not completely closed. Only one pull is missing and it can be seen that the pull was mounted by a single screw through a hole in the drawer front. Likely, it had a washer and nut on the inside of the drawer. The other pulls are there. Open a drawer to see how those are fastened. It may have a square nut instead of a hex nut. The screw end should be flush with the nut, or be covered with a closed nut to lessen the chance of damage or injury.

Might want to check Van Dykes hardware. I think they have pulls that are close match

http://www.vandykes.com/knobs-pulls-pulls-bail-ring-pulls/c/9383/

Well, it was sold right away. Wish people would remove the ad.