Software
Houzz Logo Print
javiwa

48" vanity + top/sink - flush to wall on left side

9 years ago
last modified: 9 years ago

My brother has hired someone to redo my mom's small bathroom (total gut), and he's asked me to source just about everything. The guy he's hired will install the vanity and top, but it sounds like RTA is out of the question. So, we're stuck purchasing something pre-assembled.

This is the current vanity in place -- standard 48" cabinet w/ top + 4" back/side splashes:

After many hours of searching and dragging my elderly mom all over town, we settled on this dark grey unit from Lowes (Allen + Roth Roveland):

Despite my warning about carrara marble, Mom really loves the surface. And she finds a white quartz too glaring.

I'm sure all of you keen-eye folks have instantly spotted what I didn't until the next day: we need a cabinet that will be installed flush with the left wall.

There are vanities all over the internet. If anyone has ordered over the internet and can recommend a company or brand, I'd greatly appreciate that advice. I realize we may end up with MDF, and that's fine. We just want to make sure the joinery is decent, the drawers and doors align (and open/close) properly, and that paint/varnish finish is decent. The configuration of drawers flanking center sink is perfect. Real top drawers are a must, so my mom doesn't have to bend to open a drawer.

Thanks, all!

Comments (20)

  • 9 years ago

    You can cut a filler strip and either stain it or paint it the wall color to fill in that little gap.

    javiwa thanked palimpsest
  • 9 years ago

    TY, pal. I'd done a bit of GW searching yesterday and saw similar advice about filler strips. Given the molding detail on that left side, I'm afraid a simple rectangular piece won't cut it:

    I don't know that we can count on the installer's talents for color-matching. With the potential for a poorly done filler and a color mismatch, I'd like to see if we can't first find cabinetry that will take a flush installation. If not, though, we may end up exactly where you suggest.

    BTW, the installer is a friend of a friend of our cousin (!) whose experience is doing apartment renos. Not my choice, but I'm trying to work within what I believe might be a limited skill set. My brother realizes he'll need to be very hands on in a 'supervisory' capacity, when the time comes.

  • 9 years ago

    A freestanding vanity is never the correct product choice for a flush or alcove installation. A higher end cabinetry company can do a furniture look with a flush side meant to install flush to a wall, and build in an extended stile. But it won't be one of those cheepchinesecrapola type vanities that litter the market.

    javiwa thanked User
  • 9 years ago
    last modified: 9 years ago

    Just go back to Lowes and buy the off the shelf grey American made Diamond bath vanity there. You will get 85% of the look, including the color. The kitchen department can order you a filler to match, because it's from Diamond. It may take 3 weeks for the filler, but you can just leave the space for it and slide it in later. You will need a custom top if you use the whole 3". Or else cut the filler to no more than 1/2", and have a minimal overhang to the right with a stock top. But 1/2" filler is difficult for even a professional cabinet installer to do.

    Or, just order a 45" vanity from the kitchen department, in any number of configurations, with the full 3" filler. And do a custom top so the sink bowl will be centered.

    javiwa thanked User
  • 9 years ago

    I think you should check out a cabinet that would have drawers on the left with the sink to the right instead of centered. That way your drawers would be wider with less waste. If you need a ready to go cabinet, maybe you should use a 42 inch cabinet with a set of drawers to the side. Leave about 4 to 5 inches of space between the wall and counter.

    javiwa thanked Karenseb
  • 9 years ago

    Sophie: Outstanding advice, thanks! I saw the row of off-the-shelf Diamonds on display, but I didn't connect that this was the same Diamond as in the custom kitchen department. We nixed the Diamond vanities because of the drawer configuration (i.e., fake top panel instead of drawers), but that may need to be something we'll have to compromise on.

  • 9 years ago

    TY, Karen: Mom is 84 and used to putting all her stuff in very precise places on her vanity. :) I'm trying not to rock her world too much and, therefore, would like to keep the same countertop space on either side of the sink. I don't think maximizing drawer storage is high on her list, as it would be yours or mine.

  • 9 years ago

    javiwa-

    Why are you worrying about complicating this with a filler strip?

    If it were me, I'd buy that nice vanity you selected, and install it up against the wall. I don't find that aesthetically horrible, and if your main concern is dust getting in that small space it's easy enough to clean up occasionally with a rag wrapped around a yardstick.

    javiwa thanked kudzu9
  • 9 years ago

    Oh for sure the filler would have to be scribed to fit the moulding detail.

    javiwa thanked palimpsest
  • 9 years ago

    kudzu: ...on account of, I know my mom, and that gap would drive her nuts every moment of her day -- something I'd also like to avoid in her golden years. :)

  • 9 years ago

    Where is your Mom located? Is there an Amish community nearby? Quality is top notch and prices are quite reasonable.

    javiwa thanked cpartist
  • 9 years ago

    I pushed my Kraftmaid vanity against the wall but my granite was not a pre-fab--it was purchased at a stone yard and templated to the wall. I didn't even need a filler--it's only about an inch and the side of the wall is all shadowed. It should work on your vanity as long as the counter is able to butt up to the wall. It does look like the counter is longer than or the same length as the the base molding.

    javiwa thanked User
  • 9 years ago

    There was a vanity placed this way literally the day I closed on a house I subsequently rented out for two years. The amount of crap I dug out of that crevice after the tenants moved out was incredible: hair, crumbs, used qtips, panty shields...you name it, it was in there. And some of it was glued to the side of the cabinet and floor with spilled mouthwash and liquid hand soap. Granted the girl whose bathroom it was was dirty, but even if she *had ever tried to clean it, the crevice was really almost inaccessible.

    I dug the stuff out with a metal ruler and wire hanger as much as I could.

    javiwa thanked palimpsest
  • 9 years ago

    pal: ewwww!

    Mom has already nixed the cabinet we originally found and moved on to thoughts of a flat-sided version. Sophie's idea about going with Diamond had us give the Palencia a second look (reviews on the Goslin model were less than stellar, but Palencia got higher marks, generally):

    She doesn't mind at all that there are no top drawers. And this line comes with a toe kick piece for $67 to close off the entire bottom area (another dust catcher!). Step 2 is to find a vanity top to go with -- we're getting there! Thanks to everyone for all your help -- as always, such a wonderfully supportive community. :)

  • 9 years ago

    cpartist: She lives in a suburb about 1/2 hour east of downtown L.A. Problem is, especially given this holiday period and I'm headed home the end of the week, I just wouldn't have time to sit down with anyone to plan this out. I think a custom cabinet wouldn't be ready for another couple of months, and our guy is lined up to get started in three weeks.

  • 9 years ago
    last modified: 9 years ago

    My Kraftmaid vanity took three weeks and shipped from the Midwest somewhere to Oregon. The hardest part was finding a vanity top!

    The countertop overhang won't allow you to put the vanity flush against the wall. You can order a filler, but to accomplish what Pal talked about, your mom would need to purposefully push stuff into the opening because there's no opening from the top. I just dusted mine after four years with a cloth-covered stick and it had very little dust. MongoCt recommended recessing the filler about an inch so it disappears. I thought that was a good idea for vanities that have some type of decorative side or leg.

    I'm a lot younger than your mom and I hate the low drawers. Also, those are deep drawers so it's further to reach. If she has another spot for her daily small items like toothpaste and a brush, she can keep bottles and TP in there.

    javiwa thanked User
  • 9 years ago

    TY, mayflowers. The Lowes guy (whose helpfulness will hopefully be matched by his knowledge) said when installing the top, we should be able to scoot it over to the right, leaving left flush and a slightly larger right overhang. Given many of these tops are 49" made for a 48" cabinet, overhang might not even exceed 1".

    I inspected the drawer/cabinet contents just now: not much going on in there any way (she doesn't have a lot of 'stuff') -- TP and a blow dryer will be perfect in the right drawers. She actually keeps all daily use items on top, to the left of the sink. I just used a bit of primitive image copy/paste to hide all her items in my first photo.

  • javiwa thanked nosoccermom
  • 9 years ago

    Happy ending posted here - scroll to September 23 post, in case anyone's interested. Thanks for everyone for your feedback! :)