Software
Houzz Logo Print
l_d_g

Hockey mask repaint

9 years ago

A few years ago I made a Jason/F13 hockey mask replica with the help of this video. Unfortunately, some of the paint didn't stick so well and has since cracked and chipped off. Buying all of the materials at this point (less disposal income than I had) would be hard to justify...especially for a one use touch up. I'm looking for a cheap but effective way to touch it up and also strengthen it against chipping. Thanks!

Comments (5)

  • 8 years ago

    Is it plastic or some other kind of material? I looked at that site & saw a mask laying there, I think it was an off white mask, if it's plastic could get fusion paint & spray paint it & small craft paint for the black on it. Why is it chipping? Is it being worn or what? I finish projects with Satin Krylon spray paint(all paint is cheapest at Wal Mart!

  • 8 years ago

    The mask is a standard plastic hockey mask that you'll see on the shelves around Halloween. Some of the chipping came from poor settling/aging/drying, but it did take a tumble that added to the current blemishes that triggered this post. It is more for display purposes as it is a custom crafted Jason mask.

  • 8 years ago

    Fusion paint is made especially for plastics, if you just want to touch up would be hard to match but if I just need to cover some chipping or a little spot & often hold the shook p spray can so the nozzle will squirt the paint in the lid & then dab the paint on the chipped area, can wipe out rest of paint & put cap back on paint can.

  • 8 years ago

    Here's what I'm working with, if it helps. You can see hairline cracks that I'd like to secure with a spray on top coat if possible.



  • 8 years ago

    Well, I know what I would do, get some Dap Quik-seal bathroom caulk , only brand I use as it is easy to use & gently rub along where top coat is missing so not so much of a ridge & any hairline cracks put some on your finger & rub into cracks & lightly wipe off extra with a damp, not wet rag, let it dry couple of days & repaint. I have used this on cracks in my house from earthquakes inside & out & it doesn't reopen & you can paint over it. Might have to smooth couple of coats of Dap over missing places as it looks like a pretty thick coating. You will need to have a small bottle of black & mix a little black with a little white to make the dark greyish black places that are missing. When you like it then after paint has dried couple of days spray the whole thing with 3-4 coats of Krylon , the black paint doesn't have to be Fusion paint as just using a little & mixing with the white fusion paint. Use a little cup that you can throw away & mix with end of a small watercolor brush & use the little brush to brush on the mask be sure to have paper towel handy & touch you brush to it 1st before the mask so you don't overdo on the paint, little at a time is best!

Sponsored