Software
Houzz Logo Print
wantonamara

CHEAP SMALL POT AND SAUCERS?

8 years ago
last modified: 8 years ago

So where do you guys go for cheap small generic clay pots and saucers that fit.. I am looking to glue them together and make a closed capsule irrigation system in my garden . I am looking for about 50 pots and saucers, SO PRICE MATTERS. I am looking at brick and mortar locations . I looked online but the shipping kills me. 7 dollars for 5 pots but $16 for shipping . Michaels had some Chinese ones that were 4.5" X 5.4" tall 1.79 for the pot and .75 for the saucers. They didn't have enough. Lowes looks like a possibility. After I get this down , I have to look into drip irrigation attachments and hoses. I have not gone down this road before. Any knowledge is appreciated. .

Comments (23)

  • 8 years ago

    Mara, there's more than one Michaels. How many did you need ? And did you need those black drip hoses ?


    wantonamara Z8 CenTex thanked castro_gardener
  • 8 years ago

    Yea, I know there are more than one Michaels. I am looking into HD. I think they might have it cheaper. Not drip hoses but I need some barbed fittings for 1/2" hose to connect the pots.

  • 8 years ago

    What if you started w/used ones on CL?

  • 8 years ago
    last modified: 8 years ago

    The last couple of years I've picked them up at the chain called (99 cent Only) store. Red Clay pots but no saucers. Made in USA. They look about 2quart size or so. It's on the bottom so can't see without turning upside-down..

    You may be able to order online from them?

  • 8 years ago

    Shipping is crazy expensive compared to their price so I need to buy locally. I am even unsure about the size. I am getting different info . I guess I need to just buy some gorilla glue and start experimenting.

  • 8 years ago

    Dollar stores and the like can ship items to the store at no cost to you. They don’t advertise it but they certainly do it.

    wantonamara Z8 CenTex thanked bossyvossy
  • 8 years ago

    So what exactly is it that you're doing with them? Okay ... I Googled clay capsule irrigation, an olla system. Neat, but I don't see where they are using saucers. Inquiring minds want to know.

    wantonamara Z8 CenTex thanked roselee z8b S.W. Texas
  • 8 years ago

    Actually a quite few years ago we got pretty low prices at Home Depot on plain terracotta pots and saucers. We also found a closeout on barbed fittings for drip emitters at Wal Mart, but that was off season or end of season. We got a big bag of mixed parts for maybe $20.

    wantonamara Z8 CenTex thanked PKponder TX Z7B
  • 8 years ago

    Some people use the saucers glued to the pots instead of two pots glued. I am leaning towards two pots glued. They cost about the same and you get more water delivered with two pots glued. Sometimes my raised garden is not tall enough for the height of the glued 6" pots. I need to just start gluing.

  • 8 years ago

    Mara, I once found clay pots at Humanity Restore.... maybe you can contact them too.


  • 8 years ago

    Mara id really like to see a pic of your project. Can’t visualize what you’re up to

  • 8 years ago
    last modified: 8 years ago

    I will take photos as I progress. I think I will buy a wad of 4" and 6" pots from HD (cheaper than Michaels.. I struck out at CL . David Bainbridge (the guy who wrote"gardening with Less Water" uses 8" pots and larger but he is in the desert. I have heard that others have found that the smaller ollahs work better here. More but smaller. I think I need to experiment with 4 and 6"ers. 2 x 4" from HD cost 1.50. 2x 6"ers cost $2.50 each. Compare that to the $30 of those ollahs.

    In your in ground garden , one can dig a hole twice as deep as a pot assemblage and three times as wide . Amend the soil with compost to the depth of the pot and plant plants 1"-3" from pot. One can plant all around the pot in the center of the whole. I am not doing this . I am using them in a string in the raised bed vegetable garden. The picture that Ragna sourced is similar to what I am doing. I might do it hose fed.I might do it just hand fed till I get all the materials researched and bought. I have some small pots in my mint patch with saucers over them. Keep it simple is my motto. I am just hand watering them. One can drill a hole in the saucer, then it will collect rain.

  • 8 years ago

    Would ollas work better b/c glazed inside?

  • 8 years ago
    last modified: 8 years ago

    You do not want them glazed. You want them to transpire moisture through their sides. Matter of fact, some terra cotta pots have been too high fired to be good.

  • 8 years ago
    last modified: 8 years ago

    Tomorrow I will go and buy a passel of pots and glue. I nerd to get them in the ground before I plant my seeds for the spring garden. Already too late for the carrots.

  • 8 years ago

    This is what I have so far. I bought 30 pots (from HD) of varying sizes and gathered my old ones together.

    I sanded the pots edges flat using 100 grit paper


    I used the price tags to back the holes of half the pots and calked them .


    I glued them with Gorilla Glue urethane glue. One moistens the edges to be glued, and put the tiniest continuous bead on the edge and then clamps them as best as possible. I used my husbands thick rubber bands on the small pots. The cellophane is to protect the rubber bands. I am not allowed to get glue on the rubber bands. Shop rules.


    On the larger pots , I used masking tape and rocks.


    The glue foams and expands as it dries. It is a mess.


    Now to untape and order some barbed fixtures after playing with placement and design. I will see if I need more pots. I just felt like I needed to get started.

  • 8 years ago

    OOPS, I went to plant the ones in the mint tires and 3 0ut of 6 leaked so I will need to let them dry and calk them. I guess I will have to check all the others too. darn!

    I did get three into the one mint tire. successfully and watering them is not too hard. I will need to get a watering funnel so I can be my normal sloppy self.



  • 8 years ago
    last modified: 8 years ago

    I think one should err on the CONTINUOUS bead concept. Those saucers did not fit tightly in some cases and I should have done a heavier application. Now if only I FINISH the project. I am great at starting stuff but then life gets in the way.

  • 8 years ago

    Let us know how they work out. That is a great concept!

  • 8 years ago

    I don’t want to be a Debbie downer but it seems to me the heat of our soil would dry out the terra cotta before the soil would get enough moisture. I sure hope it works for you though!

  • 8 years ago
    last modified: 8 years ago

    This system is used a lot in Arizona and the Californian deserts. The guy who wrote the book uses this system in desert restoraration areas. It seems that hot and dry is no problem. Debbie, Maybe the heat and dry act to suck the moisture out.

  • 8 years ago
    last modified: 8 years ago

    Mara, it should work especially well with your rain water. Here the calcium in the city water might eventually cake up preventing porosity.

Sponsored