Should I change the shape of my island countertop?

8 years ago

Y'all were such a help with my backsplash/window issue, I'm hoping to get some feedback on my island.

So we're just doing a "refresh" of the kitchen. Not changing cabinetry, just replacing countertops and adding a backsplash. I don't know what to do with the end of our island. The island is kind of... California-shaped? There's no overhang of the first part, but there's an overhang of the angled lower half. We do sometimes sit at the longer area (where the barstools are), but never at the angled end. I don't think I care for the cut corners at the end of it, it feels dated? I understand the utility of it, but since we never sit there, and don't store a garbage can or anything there, should I keep that overhang?

What are my options? Could I square off the corners but leave the overhang, or would I hit my hips on them all the time? Could I get rid of that overhang altogether (but leave the part where the stools are)? Would that look off balance? I don't think I'd like the look of a rounded end, either. Advice?

Featured Answer

mark_rachel

8 years ago

Just by glancing at it I would keep it the same, but just slightly round the corners instead of chopping them off like they are now. Looks like more of an overhang where your stools are would be nice too.

Sort by:Oldest

Comments (9)

erinsean
8 years ago
Are both ends the same? I think I would square them off...corners can be rounded if you want. We have an island with square corners and a narrow passage past the end and have had no problem hitting my hip....our island is counter height.
bobsmith thanked erinsean
Related Professionals
Waycross Interior Designers & Decorators · Hartford Interior Designers & Decorators · Yakima Interior Designers & Decorators · Springfield Architects & Building Designers · Kearney Architects & Building Designers · Toronto Architects & Building Designers · Jonesboro Kitchen & Bathroom Designers · Elgin Kitchen & Bathroom Designers · Dothan Kitchen & Bathroom Designers · Jacksonville Kitchen & Bathroom Designers · Florence Kitchen & Bathroom Designers · Sault Ste. Marie Kitchen & Bathroom Designers · Saint Marys Kitchen & Bathroom Designers · Altoona Custom Countertops · Janesville Custom Countertops
bobsmith
Original Author
8 years ago
The other end doesn't have an overhang, and is just squared with the cabinets. Do you mean square them off as in, kind of add back the missing corners that have been cut off? Or as in chop off the piece that's shaped like a trapezoid? Does that make sense?
jck910
8 years ago
I think it needs to be shaped so that there is at least a 12" overhang on the "back side" of the cabinets and both ends should be flush to cabinets
bobsmith
Original Author
8 years ago
last modified: 8 years ago
jck910 - It's difficult to explain, but if we expand the overhang where the stools are, the angle at the "outer corner of California" (far left in pic 2), if that makes sense, means that we'd only be left with an area about 15 inches wide for a stool to fit. It would be 12" deep, but only like 15" wide because of where that angle would move to.
katinparadise
8 years ago
I would leave the overhang at the back and take the short edge back to the cabinets.
mark_rachel
8 years ago
If you are looking at the first picture the angle would move more to the left.
mark_rachel
8 years ago
Something like this.
cpaul1
8 years ago
I would get rid of the overhang on the one side and have the overhang go all along the back where those stools are.