Software
Houzz Logo Print
kristine_legault

OT drip irrigation for roses

We are starting from scratch installing a drip system for my roses.

Is there a recommended system ?

Comments (20)

  • 8 years ago
    last modified: 8 years ago

    Don't know, but this is definitely on topic. I will be following this.

    Kristine LeGault 8a pnw thanked rifis (zone 6b-7a NJ)
  • 8 years ago

    Krisitine....I just installed irrigation for a garden with almost all roses and very few other shrubs or plants. I modeled the system after the one I saw here:

    https://www.dripworks.com/drip-irrigation/irrigation-kits/rose-shrub

    Basically, you run the larger diameter black tubing around the bed, then small black tubes off of that with individual drippers called "shrubblers" that go to each rose.

    I haven't gone through a full season with this system yet, so it will really be put to the test this year (we are turning it on next week). What I like about it is the flexibility to be able to move the drippers around where I need them. The shrubblers put out a round spray which I think can cover about 18 inches. For small or newly planted roses I put one, and I can add more as the root system gets bigger.

    The only two downsides I've seen so far with this system is that the more drippers you add, the less pressure goes to each emitter. I'm sure this can be solved by better planning :)

    The second issue has been that the emitters clog, or pop off sometimes. So, I have to keep an eye on the system and do some tweaking...I would say about once a week something on the system is not working. Maybe that will get better this year as we learn more about how to use it and iron out the kinks.

    I also have regular pop up sprays in some parts of the garden and plain old drip tubing in other parts. I have to say...I LOVE the plain drip. But that just puts out too much water in the rose garden where the roses are planted far apart.

    Also, I've learned a lot about installing drip by watching this garden channel on YouTube:

    https://www.youtube.com/watch?v=kWezSowIZVU

    She's not super technical, but she explains the basics well and then shows it in action in her (incredible!) garden. Love her! Watching her videos really inspires me to get out into my garden and get things DONE!


    For reference, here's a picture of my rose garden that I am talking about. I planted the roses quite far apart to allow for mature size and to be able to walk around in the beds. I didn't make sense to irrigate all that soil between the roses...that would just encourage weeds. I am going to grow some lavenders and other drought tolerant herbs in between, but they'll get no supplemental water.

    If I were growing roses in a mixed border with perennials, I think I'd do drip hoses. My landscaper is always trying to talk me out of that...probably because it's the least expensive system to install :)




  • 8 years ago

    Thank you rose lady I will be checking out those videos. My husband is out with his head together with our next door neighbor maybe they can get some ideas together. We have a great irrigation system for the lawns but it puts too much water on the leaves of the roses.

    We have piles and piles of drip irrigation that came from different sources and of course they're all slightly different so really trying to determine what will be the most effective way to watet the roses because basically where I'm watering is just going to be roses.

    I have one bed in the back that we do have a drip hose and that works pretty well . I use that one alot but was just looking for something that looks a little nicer and not so intrusive I get it installed.

    I so appreciate my husband putting these in for me and putting them on timers so I can continue to work and not have to come home and it's a 100゚ out and I have to start watering things . Some days I pull in and go directly to the hose. This will be so time saving and so practical.

  • 8 years ago

    My husband just came back from trip number four to home depot

    I think hes got all the parts and pieces that he needs

    We have positioned the hose. Now we just need to get the emittets added.

    Thank you so much for your help Rose Lady.

    Having everything on timers is great so if we are out of town and it's a super hot day don't need to worry about my roses or other plants frying in the heat

  • 8 years ago

    I use stuff from dripworks, works great!

    Kristine LeGault 8a pnw thanked Al Mitchell zone 5b (ameri2nal)
  • 8 years ago

    While working on the drip system it started to pour and hasn't stopped since yesterday. Kind of funny if you think about it.

  • 8 years ago

    kristine.. how is the drip system working for u .. it hasn't rained for a while now:)

    Kristine LeGault 8a pnw thanked R pnwz8a
  • 8 years ago
    last modified: 8 years ago

    He ha ha, Well we were installing the drip irrigation system which is not complete yet we have not added the emitters.

    One of our sprinkler heads got damaged when it got run over by a delivety truck. So we dug it up to change out the spinkler head and found there was a leak in the pipe on the other side of the sidewalk where this all feeds together.

    . So , in digging things up we found a Junction Box sitting almost at the very top of the soil with live wires that run to our outside lighting. So , now we are digging trenches so that we can put in new irrigation. Piped on the other side of the driveway and put in new wiring for the lighting.

    What we found was so dangerous and illegal and lazy. I am so amazed that in digging out that gigantic Juniper that we didnt hit that junction box.

    So, to answer your question, The drip system is on the back burner for another week.

    It rained last night and it is raining today so we've got plenty of rain keeping everything wet.

  • 8 years ago

    I am so lucky I never hit this nox eith my shovel

  • 8 years ago
    Oh my God!drip system should be definitely be on the bottom of ur list right now .. good luck!!
    Kristine LeGault 8a pnw thanked R pnwz8a
  • 8 years ago

    And we are under a bit of a time crunch . In 2 weekd the painters come and the contractor is coming to put in a new front porch, windows and siding so we need to get that power and irrigation taken care off and that hole covered up quickly.

    Since we have moved into this home we have found that almost all the irrigation was about 6" under the soil pretty much everything on the side and back yard has been removed and replaced but the front yard , here we go again .

    But by the time we are done and ready to plant, everything will be done according to code it will be safe it will be sturdy and ready to go

  • 8 years ago
    last modified: 8 years ago

    A tip on installing the drip units. Don't try to twist them into the end opening of the 1/4 inch hose. Insert the end of the drip unit into the open end of the hose then do a side to side bend while applying forward pressure on the hose and drip unit. Continue until the end of the hose is up against the flared section of the drip unit.

    To remove a unit just use your rose clipper and cut the hose off in slices until it comes loose.

    Have fun....

    Oh, don't forget to install 'back flow' unit AFTER the on/off switch. AND it must be the highest point in the drip system.

    Rule of thumb, one 1/4 inch hose with drip units can service up to 60 plants at 1 gallon per hour rate.

    While you're at the store pick up some 'goof plugs' you'll need them sooner or later!!

  • 8 years ago

    Goof plugs lol. My husband says we have lots

    Thanks for the heads up on the installaion.

  • 7 years ago
    last modified: 7 years ago

    I didn't realize that drip irrigation could be simple.

    I'm going to try this out. I am planting an entire bed of Austin's (12) with a couple hydrangeas and have read they are real water hogs.

    Is adding the timer or pressure emitters complicated?

  • 7 years ago
    last modified: 7 years ago

    Hi - Just saw this 1 year old thread got brumped. Just wanted to chime in . Netafim is my preffered manuf. It's great. I have different zones. Different profiles. Some things get larger emitters, some get small. I really love the ~control~ it gives me

  • 7 years ago

    The drip system worked out really well last year. We have everything on timers and did different zones and it was really easy to set up well at least for my husband it was lol and if I need more or less water on my roses it's very simple from my husbands smartphone to change the timing.

    So if it is a particularly hot day I can leave it on longer.

    We can add extra emitters and move it fairly easily.

    For me it has been a huge time saver.

    But that system is in the front yard only. For now in the backyard I have the drip irrigation hoses and those work really well but these will break down eventually in the Sun.



  • 7 years ago

    Thanks for the feedback, Kristine.

    I would only need these for 2 small beds.


    One will have 12 roses, the other will have 5-6.

  • 7 years ago

    Lots and lots of goof plugs.


    Each drip emmitter head usually has a color that indicates how much it drips. If you have large rose bushes, you'd like to have emitters on three sides. OR you use a head that emitts more and then then, off of it make splits and feed four small hoses from it. (There are at least two different designs on the heads: one is a dead end and the other passes water through and can have another feeder hose and it becomes a dendritic pattern.


    I try to keep my emitters above the ground to keep debris and bugs from clogging them.


    Emitter hoses make really spectacular water features when they get nicked by a lawnmower, by a spading fork, by a weeding tool. Really pretty.

  • 7 years ago

    In case you would like to NOT use emitters here is a layout that gives equal water to each plant. Just modify to fit your situation. The 1/2" Poly hose could also be split with lines running to different beds.