Software
Houzz Logo Print
cgcl

Beveled tile on Shower floor?

8 years ago

Will a 2"x2" tile with a bevel (link below) be uncomfortable on bare feet in a shower? Any insight would be greatly appreciated.


We selected a nice 1.25" copper penny tile for the shower floor because we understood a small tile with many grout lines makes the shower floor less slippery. We selected all our other bath finishes with the shower floor color in mind.


Now, just prior to install, I'm told the Schluter Ditra heat system for under the floor requires minimum tile size of 2"x 2". The contractor wants to stay with Schluter for it's waterproofing qualities, and we prefer a heated floor, so that leaves us with selecting an alternate tile.


The mfg of the originally selected tile makes different sizes in the same color. Our options are:

a. 2"x 2" beveled - concern is the bevel will be uncomfortable on bare feet. Thoughts?https://www.houzz.com/products/1176x1176-beveled-metallix-mosaic-set-of-4-antique-copper-prvw-vr~85320951

b. 3"x 6" non beveled - concern is the size of these tiles will result in a slippery floor. Thoughts?

https://www.houzz.com/products/3x6-metallix-tile-set-of-32-antique-copper-prvw-vr~85320954

c. No heated shower floor, and use the originally selected tiles. Concern is with the size of the shower (4'x5') there will be cold spots when you step into it that the water did not heat.

https://www.houzz.com/products/1157x1157-nickels-metallix-mosaic-set-of-4-antique-copper-prvw-vr~85320970

Comments (15)

  • 8 years ago

    it would be uncomfortable on *my* feet but i have really sensitive feet... i cant wear any of those plastic sandals that have ridges or bumps. i'd also think they'd be difficult to clean.

    i'm not seeing the need for a heated floor in the shower. it gets warm right away as soon as the hot water hits it anyway.

  • PRO
    8 years ago

    If a Schluter foam base is used you can rule out option C as the base also has a 2x2 min requirement. A mud bed would be fine.

  • 8 years ago
    last modified: 8 years ago

    @mayflowers: Please help me understand. In the "Product Description" it says: "They are perfect for backsplash, shower or tub surround, wall tile, floor tile, ceiling tile, accent tile, or borders." Since it lists both shower (wet area) and floor tile, I thought they would work. The sample I have appears to be a metal skin over a ceramic type base. I'll call them tomorrow.

    @ CreativeTile: Where do I find the 2"x2" min requirement for the foam base? The only thing I can find on the Schluter site for the Kerdi Prefabricated Foam shower tray states "There is no minimum tile format in general. However, if mosaic tiles will be used and exposed to heavy loads a mortar base is recommended." Is the shower tray a different product than the foam base?

  • 8 years ago
    If they have a bevel, won't that stop them from draining completely?...then you would have mildew and nasty grout
  • 8 years ago

    Please let me know what the company says. I wanted to do a stainless steel penny tile for my shower walls but the ones I saw had a fiber base and I was told that most do. It's probably to keep them from being too heavy for wall installation and too expensive.

    That tile company is only 20 minutes from me. I didn't even know they existed!

  • 8 years ago

    I'm with ninigret: there is no point in having a heated floor in a shower. In addition, I also don't want anything electric buried in my shower floor as any breaks in the wires would not be a good combination with a wet, highly conductive floor surface: [Shock hazard heated floor[(https://www.houzz.com/discussions/heated-floor-causing-electrical-shock-when-touching-shower-fixture-dsvw-vd~3670480)

  • 8 years ago

    I also am failing to see any advantage to a heated floor in a shower as my feet have never been cold in a shower since one gets in after water has run and so the floor is the temperature of the water.

    I also prefer to minimize mechanical stuff when unnecessary - I can see the advantage of a heated bathroom floor but not a heated shower floor.

  • 8 years ago

    Called the manufacturer of the tile. They state that NONE of the metallic collection can be used in wet areas, because it will rust. I asked if the copper color was made of copper (copper does not rust) but she kept saying it would rust. I suspect it is made of a metal that will rust and just has a copper colored finish on it. So back to square one. Tile contractor is a larger one with a showroom, etc. They were surprised and said they had installed it in several showers....

    In regards to the heated shower floor, y'all are scaring me. It is a larger shower so I don't think it will heat from the shower water. Using a Schluter Ditra heat system rather than the powered mat. Does that make a difference?

  • 8 years ago
    • my shower is open, 5' x 8' and the tile is not cold in winter. we have a combination vent/heater in the ceiling.... it blows hot air in winter, once you are toweled off you switch it to vent.
  • 8 years ago
    last modified: 8 years ago

    Thanks for the info on the tile. I've seen ceramic tile with a metallic glaze that would be a good substitute.

    My shower is 5' and I have never been conscious of the floor feeling cold. Have you never been in a larger shower so you're imagining it's a problem? Even if the first step or two is cold, are the soles of your feet so sensitive they can't handle a brief cold touch?

  • 8 years ago

    cgcl-

    Whatever heat is supplied by a heated shower floor is trivial compared to the heat of the water. A shower runs at about 105 degrees F, skin temperature is about 98 F, and you would never try to heat a floor to those temps. Even if you have a heated floor, it will still be cooler in comparison to your skin. On the other hand, as soon as water at shower temperature hits the floor, the floor will be heated in a few seconds far more efficiently than resistance wires in the floor can provide heat. The fact that your shower is large doesn't affect things because I can't imagine taking a shower while standing somewhere that the shower water isn't hitting.

    It's your money and your project, so do what you want. But, to me, a heated shower floor is an unnecessary and expensive complication that won't make any difference. Further, because the mass of the shower floor is large, there would be so much thermal lag that you would need to have it on all the time: you couldn't just turn it on when it's time to shower and expect it to quickly get warm. I can think of a lot more things to spend money on in a bathroom that would actually add value....

  • 8 years ago
    I think you are completely overdoing your shower floor. I'd suggest going a lot simpler.
  • 8 years ago

    Even with the standard slope of a shower floor water will sit behind the bevels and not drain completely. Go with a flat surface.

  • 8 years ago

    I don’t know what your copper tile specs are bit I am using copper penny tile as an accent frame on my shower wall. Of course wall shower is different than floor shower specs since tiles will say not suitable for floor but the tiles don’t state they aren’t suitable for floor. To clarify, my other wall tiles specifically state they aren’t suitable for floor but the copper tiles I don’t know if the copper tiles I am using as accents on the wall are sjitable for floors but they are suitable for wet.

    I am also using copper subway tiles in my kitchen and these are pure copper from Premiere Copper.