Software
Houzz Logo Print
love_the_yard

Quality within a Brand?

Are Grohe, Hansgrohe, Moen, etc. internal parts/guts as good on their low-end products as their high-end products? In other words, is the difference in price primarily due to design, size, and finish? Or do the internal parts and workings get better in quality as you go up the line within the same brand?


I'm looking at the low-end products in some high-end brand names but don't want to cheat myself if the low-end items are actually junk.


Thanks very much, all you experts!


Carol

Comments (11)

  • 7 years ago

    Helen, your comments were very helpful. Thank you for taking the time to fill me in your thoughts and experience. I am looking at all three of the names I mentioned previously and I will add Brizo to the list. Thanks for that nugget, too. I am in the early stages of shopping. I need to replace three bathroom sink/lavatory faucets.


    Carol

  • 7 years ago
    last modified: 7 years ago

    So I wonder, if I buy an entry-level Grohe, am I getting the same internal quality as the higher-level, designer Grohe models?

  • 7 years ago

    I would say not, but I cannot be sure.

    Carol love_the_yard (Zone 9A Jacksonville, FL) thanked millworkman
  • 7 years ago

    Starcraft Custom Builders to the rescue! Starcraft Custom Builders Faucet Reviews


    You will see that the page I linked to is the review for American Standard. Look to the list of faucet names to the right and click on the ones that interest you. Starcraft is concerned about the lead in drinking water, so is sure to point out when the company is not meeting the federal standards.

    Carol love_the_yard (Zone 9A Jacksonville, FL) thanked Nancy in Mich
  • 7 years ago
    last modified: 7 years ago

    Thanks, Nancy. In my research I had come across Starcraft's review site and bookmarked it.

    You wrote, "Look to the list of faucet names to the right". Did you mean brand names rather than faucet names? I can't find where they review individual faucets but if they do, I would be very interested in seeing that.

    I haven't been able to get that much benefit from that site because I am already familiar with the high-end companies. What I do not know is if quality varies within the same brand. Is a low-end Moen as good as a high-end Moen? Is the difference in price between Moens comprised solely of variances in design, material, size, age? Or are low-end Moens made with lower-quality internal parts and put together using lower-quality techniques (cheaper labor)?

  • 7 years ago

    Carol, I have no idea what you mean about the reviews being of high-end companies. Moen and Delta are reviewed, with their entire histories there to read. Buried deep in the Moen article is just what you are asking about:

    " Unlike Masco's Delta Faucets which are divided into quality bands — Peerless — Delta — Brizo — all Moen faucets, whatever the quality level, bear the Moen nameplate, making it difficult at times to tell high quality from lower quality Moen faucets. The difference is often where they are made. Lower quality Moen faucets tend to be made in Asia while better quality faucets are made in the U.S. Look for "Made in [not in the U.S.]" on the box to identify these foreign faucets. Be aware, however, that almost all Moen faucets include some foreign content and some Moen faucets are all foreign content."

    Carol love_the_yard (Zone 9A Jacksonville, FL) thanked Nancy in Mich
  • 7 years ago

    My non professional opinion is that if you stick to one of the brands that are well known, you are going to get a reliable faucet. Delta and Moen are less expensive than some brands but generally are of high quality.

    Determine what your budget is and then find fixtures from a reliable brand within that budget. Above a certain quality level, you are going to get a dependable well made faucet.

    Think of it as Honda versus Mercedes or Chanel versus DKNY.

    It is my understanding that Delta has a lifetime warranty.

    And you are replacing bathroom faucets which are very easy to replace down the road unlike other items. Most people replace their bathroom and kitchen faucets at some point and it’s either DIY or a job for a handyman so it’s not something to agonize over as a relatively inexpensive Delta will provide reliable service for years or if you find a style that is only available for more money and you can afford it, go for it.

    My personal experience in comparing kitchen faucets that were more or less the same style was that the Kohler Artifact was slightly more finely detailed than less expensive ones in the same type of style. Since the Kohler was within my budget, I went with that one but I would have gotten a nice looking very reliable faucet for less money if I didn’t want to spend as much.

    Carol love_the_yard (Zone 9A Jacksonville, FL) thanked Helen
  • 7 years ago

    "Carol, I have no idea what you mean about the reviews being of high-end companies."

    I can't find where I said that? I mean that the reviews are of companies (brands) rather than individual models/specific faucets within brands. What I was trying to express is that I don't need the reviews to tell me which companies make the better faucets; I already know that. But I don't know if the entry-level models made by a high-end brand are basically the equivalent as other low-end-company junk. But your second paragraph gave me SPOT-ON exactly what I was looking for! Thank you for that, Nancy!!


    Helen, thanks again for more good info. I have been in my home almost 20 years and the bathroom faucets are the builder's originals so this is my first trip down this lane. I am a pretty good plumber, though, and will be replacing these myself. (Just overhauled my toilets installing new tank-to-bowl gasket, bolts, supply lines and all new guts. I had the tanks and tank lids out on the driveway (on a couple of old towels) and scrubbed them down completely, inside and out, with hot soapy water and they are like brand new. Not a speck of dust, grit or other debris in the tank... just exactly what I wanted. No leaks, either. Woo-hoo!)


    You guys are awesome - Nancy, thanks again for giving me exactly what I was looking for!


    Carol

  • 7 years ago

    Those reviews are massive. Sometimes the info you need is buried in a description of the company history or of who developed what do-dad. If you can get through them, though, they do give useful info. I have seen where they will discuss which factories used plastic or nylon parts instead of metal, where another factory of the same company uses brass. Then they tell you how to figure out which is which.


    I found the Canadian Rubinet faucets through their reviews and got just what I was looking for in a lavatory faucet.

    Carol love_the_yard (Zone 9A Jacksonville, FL) thanked Nancy in Mich
  • 7 years ago

    Moen has a lifetime warranty too and we've found their customer service excellent regardless of level or price point. About 20 years ago we found Peerless (kitchen faucet) didn't live up to its name.

Sponsored
Kuhns Contracting, Inc.
Average rating: 5 out of 5 stars26 Reviews
Central Ohio's Trusted Home Remodeler Specializing in Kitchens & Baths