Software
Houzz Logo Print
krista_pozzacurry

all cambria owners... input needed - large island

7 years ago
I’ve read some bad reviews on cambria here.... does anyone have it and not have a problem with it? I want to use it on a large island and now am worried. Advice appreciated. Tank you!

Comments (16)

  • PRO
    7 years ago

    We have only great feedback with Cambria. In our experience we have had no defects or flaws in the material, and whenever there is something we pick up that is not normal or specified within the design they will gladly replace the slab.

  • 7 years ago
    I have a jumbo island (one slab), 8x3 feet, Cambria Highgate, and we love it! It’s beautiful, and we use it every day with no issues.
  • 7 years ago

    It depends on what size "large" is to you and whether or not that requires a seam. No man made Quartz that has veining will ever look like bookmatched natural stone with a seam.


    You must design within the limitations of the materials available. You can't design a 20' H fireplace and want that covered by a single slab of stone. Nor can you design a 15' island without a seam.

  • 7 years ago
    The island will be 9ft...
  • 7 years ago

    We have Cambria countertops, installed over ten years ago, and never a problem.

  • 7 years ago

    I have Cambria in a couple of rooms, and I just bought two slabs for a lake house kitchen. While I have had my quibbles with Cambria – – certain patterns are subject to large resin pools, and some people have had complaints about the Jewel series pitting – – they still have the best looking patterns around, in my opinion. Cambria standard-size slabs are 55 1/2” x 122” and jumbo-size slabs are 65 ½” x 132” and not all patterns come in both sizes, IIRC. Still, it sounds like either one will accommodate your island, no problem. But if you are choosing a pattern with any movement whatsoever, you absolutely must pick your slab and you absolutely must go to templating. Do not let anyone tell you otherwise and I’d advise not working with any fabricator who will not let you do these two things.

  • 7 years ago

    I have Cambria fieldstone (I think that is name - dark gray brown). I love it. I would absolutely get again.

  • 7 years ago



    We put Cambria in our kitchen remodel and we love it!!

  • 7 years ago
    last modified: 7 years ago

    Love my cambria roxwell counters!

  • PRO
    7 years ago

    I am a fabricator. I suggest you view and select the slab. If you are sure of the "color" you want then a photo would suffice as you want to make sure the slab doesn't have objectionable (to you) areas like the resin pools which result from inadequate mixing of the ingredients or simply movement which you don't like.

  • PRO
    7 years ago

    @Bkob - what is the treatment on your ceiling? Great looking kitchen!!


    I sell a lot of Cambria and have had no issues. We also sell a lot of Cesarstone and MSI - no problems there either...

    Good luck!

  • 7 years ago

    My Cambria looked as good on the day it was ripped out as the day it was installed almost 14 years earlier. Planned to do Cambria again with the remodel, but fell in love with soapstone.

  • 7 years ago

    @Debbi Washburn

    Thank you! Plaster ceiling...we took the wall down between dining and kitchen, so it was blended to match plaster in dining and living room (1960's ranch)

  • 7 years ago
    oldryder, am I understanding correctly that you allow customers to come view and select a specific slab for their project?
  • PRO
    7 years ago

    "No man made Quartz that has veining will ever look like bookmatched natural stone with a seam."


    live_wire_oak:


    Apparently the Chinese didn't get the note: