Software
Houzz Logo Print
rudnickl

Help! One Kitchen Cabinet Painted the Wrong Color

7 years ago

Nearing the end of a custom kitchen remodel and noticed that the top portion of our custom hutch is a different shade of white than the base. Kitchen designer agrees and says that they can refinish it on site and that they stand behind the quality of their work. I am worried that the finish will not be as durable as the original and this is the most used cabinet in the kitchen. In a year if it is chipped I can’t imagine they would replace then either, but just retouch again. What should we do?!?

Comments (12)

  • 7 years ago

    What brand of cabinet was this? Is it a catalyzed finish? If so, they have to remake the cabinet in their shop in the correct color.

  • 7 years ago

    I am honestly not sure and will need to check. Manufacturer is Greenfield Cabinets. Is the finish you mention common?

  • 7 years ago

    Another vote to take it back to the shop. Do you want the fumes and off-gasing in your house? Many finishes are consider low VOC, but that might assume that the higher off-gassing that occurs at the beginning is done off-site.

  • 7 years ago

    there is no way they can refinish those cabinet doors at your house. they need to be taken off the hinges, sprayed, finished with the same coat they used on the other doors, and then placed on racks to dry and "cure" completely for a few days.

  • 7 years ago

    Did KD also sell the cabinets? KD should be acting as your advocate in this case. The doors need to be removed and redone at the

    shop.

  • 7 years ago

    Re-do at shop.

    Also, is there any way you could add 2 more “feet” to the base? Lined up with the center drawer base. The span across the bottom seems so wide.

  • 7 years ago

    At minimum, have the doors redone properly (or replaced) because they will get the most wear.

  • PRO
    7 years ago

    See if you can take a door off and stand it on the floor on the side of the cabinet to determine if it is not a lighting issue. Second - I would ask the installer if they noticed this when installing. If it wasn't installed it could go right back. If it is the wrong color thats alot of work to refinish on sight. I sell their product and have had refinishers out for touch ups but never a full cabinet repaint. You cannot just repaint the doors - it looks like an inset door so there is face frame showing all around - that color is wrong then also as well as the interior and all the shelves. I would press for a new cabinet.

    Start with ruling out a lighting issue - there have been some posts on here where it was truly amazing how different the cabinet looked top to bottom.

    Good luck!

  • 7 years ago

    Thanks for all of the comments and advice! We have confirmed this is not a lighting issue and the kitchen designer fully agrees. The top of the hutch was delivered a couple of weeks later than the rest of the cabinets since it was installed on top of counters and it must have been painted separately.

  • PRO
    7 years ago

    Oh no! Well don't let them put any molding on top of that until it is addressed...

    Best of luck...

  • PRO
    7 years ago

    I own a company that goes into homes and re sprays this exact product all the time. We do excellent touch ups repairs on them as well.

    When presented with a larger spray that involves the doors and drawers. We do our best to get a company involved that can hang them and spray them for us and we go in and do the boxes onsite.

    There have been many times we have created our own way of hanging them, but it is a pain.

    You have conversion varnish on there now. We would come in to re spray with conversion varnish hopefully supplied by the company that finished them or get the color code and go get some made.

    The finish if applied correctly will be as durable.

    Being sprayed onsite is not any finishers favorite thing to do, but it is possible.

    The real thing you need to consider is what else can be damaged in removing the incorrect parts.

    If you allow them to spray onsite, and all goes well in a few hours everything will be done.

    If you wait for new product they need to uninstall a lot, re install, perform any touch ups if needed to your walls, floors and possibly the cabinets themselves. All of these areas are at risk of damage if uninstalled.


    Touch up is a very big part of the cabinet industry. Other than owning Woodright Repair Services in Tacoma. I am a Technical Rep for Konig North America for Washington, Oregon and Hawaii. Konig is a touch up material manufacturer that is 125 years old.

    My Konig customers are directly large cabinet companies. They all have some times several touch up stations within the factory. Sometimes even set up to respray parts that were shot the wrong color.

    This is to help reduce waste. If those cabinets come off your wall, they go into a dumpster.

    I would give them a shot at it once. If they blow it then get new cabinets.