Software
Houzz Logo Print
crp23

Kitchen designer

7 years ago

Hi I live in northern NJ and I am interested in becoming a kitchen designer. What’s the best way to do this? Online? School? Please forward any ideas. Thanks

Comments (6)

  • 7 years ago
    last modified: 7 years ago

    Do you have a design degree? What is your degreed education path? What is your major? If you are still in school, switch to a Design major. If you are out of school, invest in some night school classes first.

    Get an internship in a showroom as a greeter/flunky while you take NKBA classes. Or get an internship with an installer and progress to paid employee, also while taking the NKBA courses. It’s maybe 20K worth of courses by the time it’s all said and done. You will need parents/spouse to assume the majority of living costs while this happens. Unless you take a second job at the same time.

  • 7 years ago

    This a second career. I spoke to NKBA and they said after I would take their 6 classes I would still not be ready to work so I’m not understanding how to get training. Going back for a degree in interior design seems unnecessary since I would learn so much superfluous information.

  • 7 years ago

    I am not a kitchen designer, but I am considering it as my a career option now that my kids are older. I think that it is a very slow start in terms of making money. The path that I am considering is:

    1. primary education through NKBA.
      2 Then an entry level job as an assistant/greeter at a planning firm.
    2. Further education and (hopefully) finding someone to take me under their wing.
    3. Eventually my own book of business/continuing Ed.
      I don’t think that I will actually make a full time income for a number of years, but I have the ability to manage because I am not the breadwinner in our family, so I am ok with being a student/low paid employee in order to learn from the right people and eventually build a more lucrative career.
  • 7 years ago
    last modified: 7 years ago

    There are a heck of a lot more than 6 basic intro classes needed! Thats just the minimum needed to learn that you don’t know what you don’t know, and be ready to absorb more. That’s why I said it’s around 20K by the time you are done.

    Plus you will still need to start at the bottom somewhere at a dealer and work your way up, just like any fresh grad without experience. I one comes in as a junior designer without some type of job experience. Maybe you can combine some of work and classes at the same time, but there is no short cut.

    True Kitchen Design deals with building codes and life safety. A poorly designed kitchen is more than just not great looking. It can catch homes on fire and kill. That’s just some of the serious consequences that we've seen from some of the poor designs presented on here.

    https://store.nkba.org/collections/all/courses-webinars

    This is not a high paid career unless you can be a shop owner and really watch your pennies, and those of your employees. After You move up to junior designer from flunky, you will personally pay for the mistakes that you make, and there may be months early on where your mistakes cost you more than what you made that month. People either get good fast, or they find something else that pays more, with less stress, and less liability concerns.


    Also, more people who want to be Kitchen Designers would be better off financially, and in knowledge leaner if the went to work for an installer rather than a design firm. It pays better, and you learn the practical side that sometimes the showroom is even clueless about. It’s a much faster route as well, as there is less competition for those jobs.

  • 7 years ago
    last modified: 7 years ago

    Spend the 3-6K and buy a graphics intensive laptop and buy 2020. There’s plenty of online tutorials to teach yourself. That will give you a bit of a leg up in getting hired as a junior. 2020 is the industry wide standard for cabinet design creation and ordering. It’s a basic job requirement, and it’s what you’d spend time trying to learn while you were an intern. Practice, practice, practice.

    Measurements rule, so carry a tape measure with you everywhere, and measure everything. Get good at it. Try a Bosch laser tape measure. Make scale diagrams of everything by hand. Your house. Your friend’s house. The public restroom at the ale house. Make measuring things as natural as breathing. It’s really really important.

    You’ll still need all of the knowledge that all of those NKBA courses cover, but you can gain some independent to the NKBA as well. Buy the IRC code books. The TCNA manual. The NEC codes. The NFP codes is a big one to know. Join local design and remodeling networking groups. They have meetings with educational components. Plus the networking is beneficial to you. Its far more beneficial to know the right people than it is to have NKBA certification. But you still need that knowledge base that they have brought together in their classes.

    Expect to take home 30-60K as an average income, while working 40-70 hours a week for it, 6 days a week. Maybe more, if you manage to hook up with a builder who offers you repeat business. They are giant cheap PIA’s for the amount of work they bring you though. Customers can be the same, and they can be great. Savor the great ones!

    Yes, you do pay for mistakes out of any earned commissions, so you do need to have a family life that pays the major bills while you get started doing this. You won’t have the skills or the name to dependably carry a household‘s expense for at least 5 years. Even then, if you want to change jobs, it can be like starting all over again on the low end. Good luck!