Software
Houzz Logo Print
jwblish

Bath: installing wall mount sink as countertop?

7 years ago

Apologies if this has been covered, I tried a search and came up empty. I've also emailed Duravit and haven't received an answer


I am using the Me by Starck from Duravit sink line for my 1/2 bath ( https://www.duravit.us/products/all_series/me_by_starck.us-en.html?product=5633529 ) and would like to use the same design line for my other two baths but those will have thick (2") marine plywood open shelves and I would like the sinks to sit flush on them. The larger one is here: https://www.duravit.us/products/all_series/me_by_starck.us-en.html?product=2358914


Can a wall mount be installed as a counter top?


Thank you for your help!




Comments (3)

  • 7 years ago

    Yes! You do it by building the "wall" into the vanity, and bolting the sink there. Here is mine:


    Right behind the back of the sink, my builder made a "wall" for it to "hang" on of a 2 x 6 piece of lumber that he designed right into the vanity frame. The sink was here from him to work with. There is a porcelain back coming down from the back edge with bolt holes in it to hang the sink on. Even though the sink sits securely in place, Jim bolted it to the 2 x 6.


    Now, my sink is a special design made to sit in a counter like this. It has a lip that sits on top of the wood counter. Your standard wall-hung sink will not have that. Mine is made to have the belly of the bowl overhanging the counter and Jim made the front of the vanity to hold it, including this sweet curved edge. This is why my vanity is walnut and not stone.


    Mine is a vanity for wheelchair accessibility, so it is open underneath the sink.


    You will need to think about the intersection of the sink and the countertop when you chose your sink, since (unless it is the 1930 Duravit or Durastyle lines) it probably will not have the lip on the sides to sit on.


    Have you looked at the DuraStyle furniture washbasins? They come with the sink and a porcelain counter molded together. They sell the wall-hung vanity to put it on, too. They are 31", 39" or 47" long. They are toward the bottom of the bathroom sinks, pictured here. If you want to, you could set the whole thing on a floor-mounted vanity like mine, with counter on either side of it. They are 19" deep, so you could have it sit on top of a stone counter with room on either side and 3" in front. I would still hang it on a wall, though, for strength.


  • 7 years ago

    Thank you for such a complete answer! I'm planning to put in marine plywood shelving and would really like my sink to sit on top. And I definitely want wood rather than porcelain. But I appreciate your suggestions!



    Bath | Ogawa Fisher Architects · More Info

    .

  • 7 years ago

    I am sorry - you had all that detail up above and I just forgot about it! My only concern would be that the bottom of the sink sits flat on the wood and at the right angle to have the water flow correctly to the drain. You would be using that ME by Starck as a vessel sink, right? The sink would not be sunk into the counter, but would sit on top of it.