Software
Houzz Logo Print
aawillo

Lighting base slightly smaller than electrical box

6 years ago

I agonized over the sconces that would go on our bath mirror because the electrical boxes are pretty low. I needed on that had an arm that would extend up if I wanted down facing cup shades. The electrician showed me that they are on a rectangular base and the elec boxes are round and square, so the round mirror cut out shows about 1/4" on each side of the sconce. Is there any way to cover this with wood or mirror so I can use the sconces? thanks. This is the fixture.

https://www.restorationhardware.com/catalog/product/product.jsp?productId=prod3110077&categoryId=search

Comments (3)