Software
Houzz Logo Print
webuser_539009607

Need help with curtain rod dimensions

6 years ago
last modified: 6 years ago

Our guest room needs curtains along 3 walls, and I need help figuring out the lengths and kinds of rods. The wall on the left has a door 37" wide, the wall straight ahead (in the middle) has a long window 8 feet wide, and the wall on the right has a smaller window 36" wide (see pics. The first is a pano shot, so has some distortion). Here's the dilemma:

The door is very close to the corner. There's a space of 2 1/4" between the door panelling and the edge of the wall. Not enough for an overhang on the right. Here are the options I'm considering:

1. The rod extends the same amount on both sides above the door (ie, 2 1/4"), or even less if I account for a small cap finial. The problem is the curtain will hang partially blocking the door.

2. The rod is an asymmetrical length, extending 6-12" off on the left only and 2 1/4" on the right

3. French Return rod so the curtain can be gathered on the side

4. Use a tieback with no rod overhang, or a very small asymmetrical extend on the left.

The window on the right has the same problem. However there is a bit more space. The left edge of the window is 4 3/4" from the wall, although still too small for a 6" overhang on the left. No problem on the right of the window.

The large window in the center has plenty of room on both sides, so not an issue. But if I do French Return rods on the the door and smaller window, I think it will it be strange to have a straight rod for the large window.

I'm leaning towards option 2 - asymmetrical rods on the door and smaller window, extending a small amount - 7" - which hopefully will not look awkward when there are drapes. My family is vehemently against asymmetry :(. They prefer option 1 - which I hate!

Separate question:

I want all the rods to be the same thickness. Most pre-fab rods come in different thicknesses for different lengths, and many brands seem to have complaints about the longer rods being flimsy and sagging. So I explored custom rods. Highland Forge will cost a jaw-dropping $625 for the 3 rods, finials and brackets. Their quality is clearly superior - steel rods with great finishes that won't scratch and very strong. No joints visible.

Is it worth it? :-/

Would love to hear what you think. Thanks!

Padma







Comments (7)