Software
Houzz Logo Print
southfanning

What should I do with this sink?

6 years ago

I want to replace this sink, but it's an odd size (48x21") and replacements I've found are very expensive. There's not enough countertop left in the back to mount hardware to so undermounts are out. I'm contacting one company about a custom made one that would fit.


Now I'm considering cutting out that section of counter around the sink about the width of the window, to put in a solid dark grey or more likely black countertop with a modern undermount sink (black or stainless). I haven't found any examples of a mismatch section of countertop online to see what that would look like. Thoughts?




Comments (12)

  • 6 years ago

    New counters and new sink. Or just leave it as is.

    southfanning thanked User
  • 6 years ago

    Consider a stainless trimkit around a stainless sink.

    southfanning thanked apple_pie_order
  • 6 years ago

    Why do you want to replace sink? It looks in good shape, do you just not like it?
    What material is your countertop? Looks like granite but I've never seen one with a sink that isn't under counter.
    If you can find a piece of matching countertop maybe you could have a section cut out a bit wider than the sink on both sides and have the new piece seemed in.
    Nice looking kitchen.

    southfanning thanked Sandybean
  • 6 years ago

    Thank you, I love the kitchen, I just really don't like the sink. It doesn't really match the rest of the kitchen, and the shape with the 3 bowls is really impractical for my use. The counters are quartz, and there's another long section of it not pictured. I don't want to have to replace all of it just to get rid of the sink, and I'm not sure if I could find a match. I was thinking a black section would look better than having something that almost matched but didn't, if that makes sense.

  • 6 years ago
    last modified: 6 years ago

    It’d be cheaper to have a sink custom made to fit the space than it would be to replace a section of the countertop just so you can buy a ready-made sink. What make and model is the existing sink? Do you know what the dimensions of the actual cutout are?

    southfanning thanked Sammy
  • 6 years ago

    Look into a workstation sink. While they are not cheap the are so practical

    southfanning thanked cpartist
  • 6 years ago
    last modified: 6 years ago

    That's what I want actually, I'm just having trouble finding one that fits the existing hole.

    I need to pull the sink up to get the exact measurements, but it's going to be something like 47x21. The length of the sink is exactly 48 on the top, but that includes the lip that fits over the counter on both sides.

  • 6 years ago

    I have that same sink! 48” long and I can’t lay a cookie sheet, frying pan, or roasting pan in flat to soak/clean. Very annoying!

    southfanning thanked jeri
  • 6 years ago

    Lol Jeri, this sink is so bad. The worst part is the grinder is in the middle bowl but that bowl is too small to get stuff into without making a mess.

  • 6 years ago

    A sink with an integrated drain board would be a good way to fill up that space.

    Berlin USA

  • PRO
    6 years ago

    You may be able to (1)remove this sink section, (2)use the countertop from the island to replace it, and then (3)replace the island countertop with something else

    southfanning thanked dezign interiors, llc