Software
Houzz Logo Print
kateedelman

What do I do about a window in the shower?

6 years ago

I am remodeling a small craftsman bungalow. The only bath has a window in the shower that I would like to keep for the natural light it provides.

Is there any way to keep the character and make it water tight?

Will a replacement composite or vinyl window stand up to the water abuse?

Is glass block my only choice?

The first photo is the current bath and the second is the proposed floor plan.

Thank you in advance for your help!

Kate

Comments (13)

  • PRO
    6 years ago

    I am not really seeing the bathroom layout. You need a window that is made for these conditions . I have no idea about the exterior of the home but often a window wider and higher works best in a shower . Make suare all the rest of the lighting is good and LED 4000K since to be honest most of the time even with a window you will need extra lighting.If that is a bench in the shower I would suggest removing it from the design along with any niche you plan . Get a folding teak stool and a nice caddy thay hangs over the wall for soap and shampoo

  • 6 years ago

    Do you know who makes a window for these conditions? Thanks for your wisdom

  • PRO
    6 years ago

    I'd remove the wood frame and do a tile wrap, instead. I'd also lose the crown molding in the bathroom; it's too damp in there to not get mold and mildew. Make sure that when you demo the bathroom, your contractor does a good job on waterproofing before the tile goes in.

  • 6 years ago

    Will this be a shower or shower plus small bathtub? I suggest putting in an opening clerestory window in the shower, above the splash zone.

  • 6 years ago

    Install a skylight or sun tunnel and don’t have a window?

  • 6 years ago
    last modified: 6 years ago

    We had an old house bathroom with a window over the tub, and here's what we did:

    1. Replaced the old window with a vinyl one, and made it smaller so the bottom of it was shoulder-height and thus didn't need a window treatment. Our exterior was vinyl siding, so easy to reconfigure around the new window.

    2. Installed cement board on the inside edges of the window (where a non bathroom window would have wood trim), shimming the bottom piece so that it had a slight slope towards the tub, so that any water would drain in the right direction.

    3. Attached a scrap of Kerdi to the edge of the window vinyl with Kerdi Fix, and then to the cement board. That made the joint waterproof, so water can't get to the window innards or into the wall behind.

    4. Painted the whole thing with Mapei Aquadefense (waterproofing membrane)

    5. Tiled in the window.

    The link above will show you photos of the process.

  • 6 years ago

    Yes! This is exactly what I needed. Now I need to understand how to repair the exterior wall and cedar clap board siding. I absolutely love the photos of the process you used. So helpful to me. How is it holding up? How many years has it been since you did this? Where do I get a good vinyl window? The stuff I have seen looks so bad. Any more reds would be appreciated weedyacres.

  • 6 years ago
    last modified: 6 years ago

    kate, vinyl, proper flashing, and proper waterproofing.

    take out all of the crown, redo your ceiling etc.

    A tile expert (key word, 'expert') should know how to do this.

    what you could also do is a smaller window that slides open. this way (it's still waterproofed, and this is vinyl) the water won't hit it constantly. also make sure to install a waterproof shower light.


    if you're keeping tub, these are period appropriate to the style home










    light in the shower. easily done. waterproof.

  • 6 years ago

    Beth H. These are perfect examples of the look I want to go for. The tubs with the tile on the outside are fantastic. Is that a special tub? Now I will have something to show to my framer and tile person so they can understand what I am trying to accomplish. Thank you for being so thorough and giving me more pictures.

  • 6 years ago

    Generally speaking, if the tub is old, it will not have a flange which the tile fits over, so cannot be made entirely waterproof. You'll have to assess that and any damage from existing shower as you demo, and possibly budget for a new tub.

  • 6 years ago

    I bought the window from a local supplier that makes them custom size without an upcharge for custom. But you could use an off-the-shelf vinyl window from a big box store. They are typically 100% vinyl, and not expensive.

  • 6 years ago
    last modified: 6 years ago

    kate, again, hire a tile expert (not a contractor who also does 'tile'). You need a lot of waterproofing expertise around that window. it's an old house. problems occur w/old homes when you start to peel back the layers. Get an expert, even if it means more money.

    They tiled around that tub in the 20's w/no problem, so tiling around it again shouldn't be an issue. not sure why mercury made that comment. Back in the day they didn't use cement board, they used lath/mud mortar for waterproofing. Old school tile guys still use that method.

    They know how to tile around cast iron tubs.

    Higher window placement with a ledge for plants!


    as for tiling the apron, normally the tiler firs out the exterior, puts on cement board, and tiles on that.




    if you decide to do this, I would consider doing a solid tub deck surround (like in the first pic). tile/grout is not waterproof, even w/sealing. do doing all of these small tiles around the tub edge means more chance that water may get through. Have a solid piece around the top is neater and easier to keep clean. you don't have to do marble, you can do a solid white quartz.



    love the black accents.


    Or you can do something like a wainscot trim.






    depending on the shape of your bathtub, it may be best to get a new one.