I would add a towel rack or hooks to that long wall to keep your robe or towel handy when exiting the shower. A heated towel rack is lush.

I would add Mirror on top of the vanity. Yes the light seems to be an issue possibly. I would add art to the long wall a glass shower door and a cute bath mat. Job well done you did great. Looks amazing!!

Thanks for the help! Both are very good ideas. Def like to hang my towels and robes and such. I do have a medicine mirror cabinet but it’s small due to the restrictions of the electrical being placed too low. Thanks again for your insight!

Fancy up the linen closet door. The current door is too flat.

Door handles or pulls on the linen closet to match or coordinate with the hardware on the vanity, a series of hooks on the big blank wall for some really lush towels maybe some at eye level and others at waste height. I did that in my last house in Florida and it really added a lot of warmth and texture. Also, one large mirror over both the vanity and toilet and a different light fixture above it. This might consolidate the two fixtures which seem a bit undersized for the room size. Some pretty baskets and maybe a floating wooden shelf or two above the towel bar and a rug with some pattern would add some texture. I’d reinstall the towel bar centered on the wall too. Nothing here very expensive and would give the room some personality. Great start and good bones!

Any suggestions? I bought it at ikea.. it has a finish but I like the idea of making it more fancy as you say!

Truthfully I liked your linen closet better w/o the door, or maybe it’s just the door that was put on it.

You can consider organizing the closet w/o doors like this. If you go this route you might want to add a few more shelves.

You can also consider a door only at the bottom.

Another consideration is a door that mimics the entry door. You can add the gold hardware or the glass hardware like the entry door.

If none of those work then this link will give you ideas on adding molding to the current door.

https://www.google.com/search?rlz=1C1GCEV_enUS875US875&source=univ&tbm=isch&q=adding+molding+to+flat+panel+doors&sa=X&ved=2ahUKEwj87-OOybPtAhVOnFkKHft7AOkQjJkEegQIARAB&biw=1280&bih=578