Software
Houzz Logo Print
lesak

My tiny kitchen, my big stress.

5 years ago

This is our recent purchase vacation home. I’m painting all the walls a bright white and want to add some black throughout. My lower kitchen cabinets will be alder in a medium stain.The upper cupboards on the stove wall will be white and no cupboards on the sink wall, just some open shelfs. The soffitt will be removed. I am struggling with what laminate countertop to choose due to the two seams I will have on each side of sink. I want something like Wilsonart white carrara or carrara bianco but am concerned the seams will be so obvious. (Please don’t suggest granite or quartz, thats a whole other post lol) Also these photos are from the real estate listing. Please help on choosing countertop and color on LVT flooring. Thank you for any input and help!

Comments (12)

  • 5 years ago

    I think any sort of marble look countertop will look out of place with the otherwise rustic and cozy look of your home and your alder cabinets. I also don't think that laminate counters trying to mimic natural stones look at all convincing in person. I tend to really like laminate (my kitchen is rocking its original 60s Formica!), but I would go for something with a subtle look to it, like a linen finish, since alder has so much movement to it with the knots and color variations. A marble or granite look, or anything else with too much pattern, would compete with that.

  • 5 years ago

    Thank you for your reply! I probably should of did more explaining in my original post. I chose alder because I was told they would probably keep its original color compared to other woods and not change color through the years. Also its a cheaper wood , more in my budget. Its clear alder, so no knots. Im redoing everything except the cedar ceiling and fireplace. I want to get away from the rustic look and make it more modern and fresh. If that makes sense 🙂 Thank you for the advice on the counters!

  • 5 years ago

    Since you want to introduce some black into the kitchen, why not consider black counters? Black and white with wood is a terrific, timeless look.


    Basalt Slate by Formica...


    Oiled Soapstone by Wilsonart...


    Any seams in black laminate will be very inconspicuous.


    Nicole

    lesak thanked nicoletouk
  • 5 years ago

    My kitchen is set up just like yours. The only seam is right in the middle of the sink and is hardly noticeable.


    lesak thanked gracie01 zone5 SW of Chicago
  • 5 years ago

    Alder is an extremely soft wood and will dent and scratch like crazy, so beware. Alder and cherry look very much alike. Alder is usually considered a more rustic look, so if you want modern, I might rethink. Laminate is a great surface except for one major problem which is the seepage of water into cracks and swelling that results. Unless you can keep those seams 100% dry, please reconsider. Real marble might appeal to you and is sometimes cheaper than other natural stones if you source it correctly. It requires certain care routines, but for a vacation home would be lovely.


    Water, swelling, and separation shown with laminate.

    lesak thanked Aglitter
  • 5 years ago

    following

    lesak thanked Karon Long
  • 5 years ago
    last modified: 5 years ago

    I dont see how black inserted into this would be helpful. I might do uppers in the white if you want that but choose some glass doors/not open shelves. I might pick a green for the base cabs and be sure to get drawers. I happen to like the stone looks that formica offers. there are many. Just bring in some samples off the boards at the big box stores. Floor in vinyl wood look planks and I'd go light. Good luck...put some color in the kitchen rather than alder. and skip open shelves [ I have a vac home and know why]...You'll like a nice lighter look on the floor. You can often find good local cabinet makers in vac areas as the market can be really strong in those kinds of spots. I'd consider that for the uppers w local sourcing for glass. the base cabs [drawers] in a green can come from ikea or a manufacturer on a bigger scale. Being a vac home ..you can do this somewhat in phases. See what you can source there....which can be interesting and alleviate some of the stress...we found a local carpenter/working on his own to do a few things...he gave us great courtesy/service/timeliness w a couple projects and had excellent skills....

    lesak thanked herbflavor
  • 5 years ago

    Wilsonart comes in 60" x 144" sheets so a seam near the sink can probably be avoided. Some of the new designs gets real pricey real fast so keep that in mind when choosing. Pick a price point and only look at those options. :)

    lesak thanked cheri127
  • 5 years ago

    I am intrigued by the look of an exposed plywood edge with laminate. Would a top mount farm sink solve your problem with the two seams? See how this guy fabricated the countertop and seamed the laminate. Ihttps://www.youtube.com/watch?v=ICR2mXNbrsw

    lesak thanked theresa21
  • 5 years ago

    @theresa21 That video you posted showed someone who attached perimeter plywood strips onto a thinner full substrate, but you can also use plain wood edging to achieve the same look. My parents have precisely that in their kitchen, and the wood edging has certainly not been ideal in a kitchen environment in terms of wear. An alternative would be laminate that is thicker and holds its own as a self edging like Abet Laminati Stratificato.

    lesak thanked Aglitter
  • 5 years ago

    I'd do a very light flooring-looking maybe like a white oak-so as not to compete with the ceiling. The space is so high you could probably pull off a high contrast ebony floor too.

    lesak thanked kj s