Software
Houzz Logo Print
amyjodavis

Damage to shower base

5 years ago

My contractor installed a new Swanstone shower base and damaged it after installation. There is now a decent size chunk that is visibly noticeable (see picture). Is there anything I can do to repair this or make it blend in more?

Comments (9)

  • 5 years ago

    Thank you! Unfortunately I was not overly pleased with the quality of his work (this included) so I don’t feel comfortable asking him to address as I’m worried it would be repaired in a sloppy way. If I asked him to repair is there anything I would request specifically?

  • PRO
    5 years ago

    Contact Swanstone Tech Support directly, It's the only way to get the proper response. Open forums will just get you a collection of opinions.

    Amy Davis thanked Creative Tile Eastern CT
  • 5 years ago

    I did contact Swanstone and requested a repair kit and they said they don’t make that color anymore unfortunately. Which is odd because I purchased it a few weeks ago from Home Depot.

  • 5 years ago

    Is it Swanstone solid surface, or the Swanstone product called Veritek? Veritek may not be repairable.

    Amy Davis thanked Nancy in Mich
  • 5 years ago

    Thanks, Nancy! It says its solid surface, so I was a bit surprised that the chunk looks much lighter than the surface. The only thing Im seeing as an option online is a tub/sink repair kit that lets you try to shade the paint to match the surface. That makes me a bit nervous though.

  • 5 years ago

    Joseph Corlett, LLC should know for sure, but I don’t think you need a repair kit. You need Joe or someone with his skills to come and make a patch. The right person will have the skills to build up the material, match the color, and finish it off so you can barely see where it was. Solid surfaces are self-repairable by the homeowner if it is a shallow scratch or scuff. If the area is the one that looks beige in your photo, I wonder if your builder tried to ”fix” it it? Your builder CAN fix it himself, by paying to remove your shower and replace it, or he can pay for someone like Joe to fix it.

  • PRO
    5 years ago

    The most difficult part of this job is getting matching repair material. I could probably fake it with some homemade particulates and color match adhesive. It looks like someone tried to abrade it away already; it's probably too deep for that.

  • 5 years ago

    Thank you both! I spoke with someone else at Swanstone and it sounds like they are able to send a repair kit that should match so hopefully I receive that soon. You’re correct that my contractor tried to sand it down and honestly it made it worse bc now the area around it is fuller than the rest of the base. I’m sure he would come back and try to repair it but I’m not comfortable having him do that.