Software
Houzz Logo Print
lshack17

How to Build a Dining Table top For a Pool table?

4 years ago

I was wondering if anyone could offer advice on how to make a removable tabletop for a pool table that can be used as a dining table. It is 98" long, 55" across. I was thinking of using MDF in two sections so it's not so heavy when moving it. Making it with an overhang of about 8 inches so chairs can slide under, also gluing styrofoam to the bottom of the wood to protect the table. Just trying to gain some extra seating for the holidays and a crafting space. We won't get into how the pool table is not used nearly as much as my husband claimed it would be.😉

Comments (10)

  • 4 years ago

    It would be difficult to get any kneespace under the pool table. You could probably get a folding 6' table for about the same price as a sheet of 3/4" MDF, and you need 2 sheets.

  • 4 years ago

    I had mentioned the top having an overhang to not have to worry about legs going under the table.  The point is to have a table much larger than 6' ready when I need it in the space I have.

  • 4 years ago

    I fully read your post and fully comprehend what you are trying to do. Here is what I am pointing out: The 8" overhang may not be enough for your knees, where depending on the style of table you have, your knees will hit the table, causing the chair to be farther away from the 8" overhang, and a large gap not allowing you to rest your elbows or droppings from your mouth not being caught by the table top. Now for kids, no big deal, eating at parties is just a quick pit stop, but may have a mess on the floor. But adults like to sit and talk, and that may include having their knees under a table. So if it works on your table side profile, go wild. If you need to enlarge the overhang, the top may become unstable.



  • 4 years ago

    Hello, I attempted to post a picture of my table when I made my original post and it did not work, this site is frustrating at times.  The photos you posted are tables that look quite a bit older. Mine is 3 years old and modern, with  a much thinner section where the playing area is. I can put a chair up to it now and still have enough room for legs to go under. The 8"  overhang appears to be what will work. Thank you for responding.

  • 4 years ago
    last modified: 4 years ago

    A comfortable clearance for people's knees below the "table" is 15 inches; you may be able to get away with 12". Allow at least 24 inches of space between each seat for your guests' comfort.

  • 4 years ago

    Of course there are other alternatives...

  • 4 years ago

    ὠ2  How funny is that? Thanks for the ideas and advice, Seabornman and judianna20.

  • 4 years ago

    In addition to the buckles underneath for the two halves, form the insulation board to fit "inset" into the play surface area to "hold" the table from sliding back n forth and to keep the middle from sagging with weight on top.

  • 4 years ago

    Dining seating needs 18” of knee room for depth.