Kohler Stages.

Kohler 3943 undermounted in solid surface. Comes with the basin rack and zero-edge corners. Easily made a workstation by simply making the rear reveal a 1/2" larger. It's an 18 gauge and even though it's a Kohler, I've installed a hundred of these and haven't gotten a single complaint that they don't evacuate quickly.

It's a 36" sink in a 36" cabinet which means a 33" cutout. It's a single bowl 18 gauge. It can be a workstation and has the pitch and grid. 6 outa 6.

Thank you Magnifico for the recommendation. I have already ordered the cabinets, and don't have the ability to use the larger 45" in my plans, and the smaller would not provide the larger sink I prefer. At least that is my observation when looking at the sink online...all have an integrated drainboard.

Thank you Joseph. I am not able to do an apron sink. But agree that many Kohler sinks have the design with 1/2" corners to do a better job as a work space than the one I have. Since you seem very familiar, is there an equivalent non-apron model? Have you received good feedback with the Franke Pescara?

Thanks for the feedback!

Cris:

The 3943 I pictured is a short apron sink, so if you've ordered a stock 36" sink base cabinet it will work perfectly. There are plenty of standard undermount 36" sinks available. I haven't gotten any feedback, but Franke makes nice sinks.

Thank you. I might consider, though I have already paid for the tilt drawer upgrade. Appreciate your input.