Software
Houzz Logo Print
webuser_374050623

Starting a project - how to approach

4 years ago

I am a homeowner, current windows are 40 years old and there are a lot of them 2 floors.

The great room has a large window looking out over a lake: 3 x 10 foot wide about 11 foot high sections; triangle and rectangular section above.

A large home but not ritzy.

3 or 4 sliding oversized patio walkouts.

It is Southern Ontario and the winters are fairly cold.

I am presuming the frames have to be redone.


1. To avoid investing trust in 1 contractor all at once is it wise to do the upper 1/2 first before proceeding with the 2nd 1/2?


2. From previous experience with 2 reputable places, they both did the windows sealing differently, One did expansion foam, the other fibre glass. One guy was old, one guy was young. What is the modern method for a colder climate?


3. I am not a fan of vinyl anything; wood is probably too expensive; is fibreglass a clear winner?


4. How to go about negotiating or ensuring the price is good? Knowing exactly what is being bought instead of having them explain it seems like one good thing.


5. What type of warrantee / guarantee from the installer should be sought?


6. It seems like a big job to me. What are thing things that I can do to cut down on the cost of the installation?


7. It is a small town; how far should I cast my search for an installer?


Yes, I know a lot of questions. Thank-you. :-)

Comments (6)

  • PRO
    4 years ago

    I wo not presune the frames need to be redone.

    I would find a contractor you are comfortable with and do all at once.

    I do not understand why anyone would use fiberglass at this point. It is inferior, slower, and would cost me more money. most of us Pro’s have busing foam for 20 plus years.

    Fiberglass sounds like a winner for you. Id recommend looking at any product before you invest.

    The longer the warranty the better , but read the fine print . Often warranty items may still cost you money.

    To get competive bids you need to get quotes on products that are similar in quality , specs and installation details. . I’d suggest to narrow your bid down to a few and try to negotiate a lower price fairly.

    I would try to keep your range within an hour travel time. I would bring this point foward to save time, they should let tou know up front if tou are in there range.


  • PRO
    4 years ago

    There is no price negotiating right now; that advice was fine pre-Covid, not so much now. If you get a fair proposal from a reputable local company sign it please.

  • PRO
    4 years ago

    If you break it up in phases, you will very likely pay more and it may be considerably more.


    Fiberglass around windows is a waste of time, unless the cavity is completely sealed - and even then, you'd be better off with spray foam.





  • 4 years ago

    Thank you for the replies.


    They would be 2 big jobs:

    a) 12 large windows + great room and 3 double or triple section sliding doors.

    b) 10 large windows + 2 sets of double sliding doors.


    Ultra Windows said breaking it up might end up costing considerably more, Wouldn't a decent place know you are coming back to them to finish the job?

  • 4 years ago
    last modified: 4 years ago

    "Wouldn't a decent place know you are coming back to them to finish the job?"

    Yes, but there are no guarantees and they would still be doing every step twice, quotes, measuring, ordering, mobilization, etc., etc..

  • PRO
    4 years ago

    I was primarily referring to inflation and the resulting price increases, which are coming every couple of months or so.