Software
Houzz Logo Print
always1stepbehind

Any truly rust proof shower curtain rods??

Anyone have a good shower curtain pole to recommend? Looking for a standard straight, not curved chrome, silver color shower curtain.


I've only used inexpensive rods from Wal Mart, Big lots etc.


Don't mind paying more if they truly are rust free.



Comments (24)

  • 4 years ago
    last modified: 4 years ago

    I just bought one today at Lowes that is supposed to be stainless steel. It isn't adjustable in length and is about an inch too long for me but my son can cut it for me.

    Project Source 60-in to 60-in Stainless Steel Fixed Single Straight Shower Rod in the Shower Rods department at Lowes.com

    https://www.lowes.com/pd/Project-Source-60-in-to-Stainless-Steel-Fixed-Single-Straight-Shower-Rod/1000616647

  • 4 years ago

    I usually spend about $20 and get them from JC Penney Non have rusted yet.

    always1stepbehind thanked User
  • 4 years ago

    Same as the folks above. I buy the non-adjustable stainless steel rods that usually need to be trimmed just a bit to fit - but they never rust.

  • 4 years ago

    Ive bought this one twice and it rusted both times. If you find a curved shower rod in brushed nickel that doesnt rust, id like to know about it. Moen Curved Shower Rod

  • 4 years ago

    How's the ventilation in this bathroom? Lingering humidity could contribute to curtain rod rusting.

  • 4 years ago
  • 4 years ago
    last modified: 4 years ago

    That's good, it should make a difference.

    Remember to open a window in another room to help the airflow and leave the fan on for at least 20 minutes after bathing. Sometimes bathroom fans are installed with a timer switch at the wall by the light switch to make it easier.

  • 4 years ago

    We liked the curved plastic rods for the tub/shower on Maui -- also the curtain rings with two sets of hooks, for curtain and for liner.

  • 4 years ago

    We have serious exhaust fans in our bathrooms. And a window that I find always helps to quickly vent any humidity.


    I played that shower rod game too. I think my S rod just pitted or looked junky. 10 years ago we lucked onto a good one. I think it is from Lowes and wasn't expensive. It must have been adjustable — no one cut it to fit. It looks stainless and solid.


    Excuse the dust.


    Our fans are not quiet, but they really move the air. From upstairs it will slam and lock all downstairs doors and windows as well as pick up stray socks. Nutone, I believe. It’s part of a light unit. I put them on timers so no one has to remember to shut them off. Dust, I can manage (usually), but mildew and mold would drive me bonkers.


  • 4 years ago
    last modified: 4 years ago

    Sometimes bathroom fans are installed with a timer switch

    Even better with family members who can never remember to turn on fans--interconnect with a light switch.

  • 4 years ago

    Are you saying to put the light on the timer too? No harm done but the point is to not have to remember to turn off the fan.


    I think it's a code requirement in the US that for a bathroom without a window, as OP described, an exhaust fan has to be wired to the light's circuit and come on with it.

  • 4 years ago

    I've never had a shower curtain rod rust.

  • 4 years ago

    Link to 110 cfm Panasonic fan

    and this timer is what we installed.



  • 4 years ago

    Mybathroom has an exhaust fan with a timer and a heated floor which helps keep down humidity. The shower curtain rod is a piece of cr@p.

  • 4 years ago
    last modified: 4 years ago

    Our house was built in mid 1980s. Bathrooms have a light or lights as well as a combined light/fan unit that has its own switch. The light is part of the exhaust fan. The switch was not on a timer, and sometimes DH would shower then leave for work without switching off the bathroom fan/light unit.

    One day hen he was working away, I bought a timer switch and installed it. Choice of minute options or ”stay on” (until shut off manually). I bought another switch for another bathroom fan (same fan-light unit but wire a bit differently). I dont think there is a straight forward way to opt for fan only.

    It sort of looks like this:



    PS The older shower curtain rod didn't rust, it just was junk-ugly and didnt stay in place.

  • 4 years ago
    last modified: 4 years ago

    "a heated floor which helps keep down humidity"

    A heated floor does not remove humidity, it only changes relative humidity.

    If you took a shower, then turned on the floor heat, warmed the room 10 degrees and then turned it off, when the room returns to the original unheated but post shower temperature, there would be as much humidity in the room after the warm up and cool down as there was before the heat was turned on. And it would feel just as humid in the room as it did right after the shower.

  • 4 years ago

    My bathroom has no window and the light and the fan are on a separate switch. House is about 20 years old. . . IDK what code says.

  • 4 years ago
    last modified: 4 years ago

    Sure, could be. That was why I said "I think". I have a powder room (toilet and sink only) without a window, the fan comes on with the light.

  • 4 years ago

    I have these rods and mountings by Bobrick in a couple of my bathrooms. They are sturdy and made of 304 Stainless Steel and have stayed rust free for 7 years of use so far.


    https://www.bobrick.com/wp-content/uploads/B-6047_td.pdf

  • 4 years ago

    @Jeff Meeks...I love Bobrick! Commerical grade!

  • 4 years ago

    My previous bathroom fan came on with the light, but this new fan has it's own switch. The fan has time and supposed to be sensing. so far, it's only been two days with the new fan...i've just been leaving the fan on till I'm done getting ready to leave. I dont have a mirror up yet so I cant get how good the fan is working so far.

  • 4 years ago

    @Useragreed, Bobrick makes great stuff. I use their bathroom hooks too.

  • 4 years ago

    Building code is a state by state, county, city thing. If you live in California it will be inclusive but that doesn't mean the same standards are going to have to be met in other states or towns. I lived in a town and county in another state that had NO building codes. Image that? I built to California standards.

    Here in the bathroom that has a shower rod I used a stainless steel closet rod cut to length. I have a small pipe cutter do-hicky from the hardware store that I used some twenty years ago. The rod uses the original solid closet rod ends holders and could be used as a grab bar if you needed it since I anchored them into solid wood behind the tile. The vent fan has a timer as does the shower light but they are separate. No sign of rusting.

Sponsored
NME Builders LLC
Average rating: 5 out of 5 stars2 Reviews
Remodeling Company in New Albany, Ohio