Software
Houzz Logo Print
tammywillmore

Floor tile in shower stall issue

4 years ago

Can someone tell me what is going on here and what to do to fix it? My shower tile was installed by a professional just about a month ago. He used the Schluter Kerdi waterproof system. This area is obviously not drying for some reason which says to me water is getting under the tiles and not draining properly. These photos are 48 hours after shower has been dry. I sent him these pics and his response was to get a sealer to apply on the entire shower floor giving the entire floor a wet look. 😠So basically, mask the problem instead of fixing the problem. I’m pretty upset about his response since the reason I hired a professional and paid $$$$ instead of installing it myself was so that I wouldn’t have an issue! Any advice about what to do here?

Comments (8)

  • 4 years ago

    Is that marble tile? If so was it sealed previously?

  • 4 years ago

    Yes, it’s marble and my tile guy said he sealed the tiles.

  • 4 years ago
    last modified: 4 years ago

    Another unhelpful post blaming the homeowner for a job they hired a professional to do. These boards are filled with shower problems by people who were hired because they came highly recommended, yet messed up the poster’s tile. Not everyone lives in a large city where one might find a ”certified” tile pro. I live in the state capital and tried to hire someone certified and the closest one I could find was 40 miles away. I’m sure he wasn’t interested in my simple little bath remodel that still cost $30k. So stop blaming homeowners and maybe offer some constructive advice.

  • 4 years ago

    It’s a pretty shower! This is unfortunately a common problem with marble on a shower floor. If you search these boards you will find many posts with the same issue. Marble is inherently porous, some more than others. We almost put the same floor in but were talked out of it by a specialty tile store. They actually said they recommended not sealing, because it can prevent the tile from drying effectively (but then on the flip side, not sealing leaves you open to staining from minerals in water etc). We ended up doing a recycled glass tile that has a similar look.

  • PRO
    4 years ago
    last modified: 4 years ago

    @Olychick make better decisions in the future .

  • 4 years ago

    Well, I’m happy with my decisions and results. One thing I know from this thread is knowing who I WOULDN’T hire and that would be another good decision.

  • 4 years ago

    In response to the comment blaming me as the home owner and stating I hired a half price handyman……you are jumping to conclusions. The tile installer was highly recommended by numerous professionals from several tile/flooring stores in my local area. He’s well known locally for the tile mural he installed in our local airport. Your response was not helpful in any way. I asked for advice for fixing the issue. If you have no helpful advice as to what I should ask or point out to my installer when he comes to look at this then please don’t comment at all. I noticed you have “PRO” next to your name. I would think if you are a true professional you would be offering helpful advice rather than ridicule.

  • 4 years ago
    last modified: 4 years ago

    I think the critical components here are ”marble” and ”kerdi”. The marble is porous and the Kerdi topical waterproofing will not allow water to migrate away from the underside of the tile. I don’t think sealing the surface of the tile will help because the issue starts from the back of the tile. Probably the wrong material and waterproofing system combination.