I am building a fibreglass pool and would appreciate your thoughts about the circulation system, and where to place the in-flows and out-flows and skimmer(s). The pool will be in-ground with a swimming area of 8m x 4m, with an additional half moon of steps at one end, extending the full length to 9.2m. The pool is set reasonably close to the house (4-5m) but with garden running down to the sea on the other side. The pumphouse is located at one end of the pool. Being close to the sea there is usually an appreciable sea breeze in the direction shown by the arrow.

I am considering having:

- 4 spa jets around the steps

- probably 4 inlets

- 2 drain points (low in the walls rather than the floor of the pool)

- 2 skimmers (probably venturi design)

So, thank you in advance for advice as to where to put everything.

David