Software
Houzz Logo Print
webuser_444758920

Lightweight alternative for wood?

3 years ago

Idk if a lot of people here fabricate furniture and decor, and I'm looking for a cheap lightweight alternative for wood boards.
What I'm doing is creating sound absorption panels, which are basically just one block of 4inch deep and 24x48 height and width of insulation.
I just need to build a frame for that, to give the outer edge something rigid, in order to be able to staple fabric into it, just like if I was creating a canvas for painting. Jost to cover the insulation material.
The thing is, wood and MDF are quite heavy, and I would like to make these as light as possible.
So, I was wondering if anyone here knew of some stuff 4inch wide materials I could use to build a frame like this with.
I'd really prefer 4inch wide to fit the depth, because then I don't need to make perfectly straight cuts, but I could maybe cut material to size also, if necessary.

Comments (14)

  • 3 years ago

    content://com.android.chrome.FileProvider/images/screenshot/16714880661648866835951760784504.jpg

  • 3 years ago

    This 1" x 4" x 96" weighs about 4 lbs so your panel would weigh about 6 lbs plus the weight of the insulation. Is that too heavy? (Of course a 1 x 4 is actually 0.75" x 3.50".)

  • 3 years ago
    last modified: 3 years ago

    @wdccruise I'm not actually sure how heavy is too heavy in units. I only know that I need to hang it on an apartment wall. So, the lighter the better. Solid wood seems like it would be pretty heavy to me

  • 3 years ago
    last modified: 3 years ago

    Writing comments here is terrible on mobilemobile.

  • 3 years ago

    These E-Z Ancor drywall anchors will support 40 lbs.

  • 3 years ago

    Is it actually 4"? You can get light gauge metal stud track at home Depot. It has a rolled edge that the fabric would wrap over.

  • 3 years ago

    @Seabornman: "get light gauge metal stud track"

    He's have to bend, cut, and screw pieces of the track together; and find an alternative to stapling fabric to the frame. Plus wood is probably a better sound absorber than metal.

  • 3 years ago

    Spray adhesive.

  • 3 years ago
    last modified: 3 years ago

    If it will just hang on the wall, and not be bumped, you could try making a backing of thickish cardboard. Glue a strip of wood at the top to fasten your hangers. Alternatively, use cork instead of styrofoam.

  • 3 years ago

    Why not just build a frame and stretch the fabric as if it was a painter's canvas? You could use fairly thin wood to build a simple frame box and then staple fabric over it.

  • 3 years ago

    I am not sure why you'd need a panel(s) in an apartment. Usually, interior panels are strategically placed for acoustic quality within the space. If you are trying to lessen noise to or from your apartment and other units, a few sporadic panels won't make much difference.

    Having said that, you can buy a prefab panel probably similar to what it would cost you to make (and the trouble). Or, a very simple, cheap, light panel would be to buy foam (prepackaged for this purpose) and spray adhesive fabric over it.

  • 3 years ago

    He wants to build acoustic panels for sound absorption (i.e., to reduce room echo) and not to reduce external noise. Cork, styrofoam, and foam are not appropriate sound-absorbing materials. He has to use rock wool or fiberglass bats. He's planning a four-inch deep frame with fabric stretched over it. He mustn't do anything that would block sound transmission through the fabric such as spray an adhesive which is why he has to staple the fabric to the frame.

  • 3 years ago
    last modified: 3 years ago

    wdccruise is right on the money in this thread lol. I've been researching this and asking in other places as well, and so far I think the best and cheapest solution is to use either mdf, which seems heavy to me, or a wood trim, and then cut holes into it for lightness, while maintaing rigidity. This is much cheaper than buying it per panel. one panel would cost me about 80$ However, I'm buying 10 panels of rockwool for 100$. Then it's just the wood frame I need to buy and some fabric. I'm going to be making probably 14 1ft x 4ft panels, but I was original considering 2ft x 4ft, which is what's 80$ each on the cheap end. So, if we keep that, I would be making 7 of those, which would amount to 560$ So, unless I'm gonna be buying 460$ of wood/fabric, I should be good for it being cheaper.

    Cardboard on the back would reflect sound back forward. I'm actually going to be putting some cork stoppers on the back of these to keep them off the wall slightly. They will reduce some noise leaking out of my apartment into the neighbour's place, but nothing too significant. The real reason is to get rid of that room sound. If you've ever painted an empty room, you will notice how much room sound you get. Laymen call that echo, but technically echo is distinct sound repeated back, whereas this sort of room noise is called reverb. Filling a room with furniture and book cases and things like that will dampen it. These types of panels also dampen quite a wide range of frequencies. But thicker ones are need for deep bass, and different shapes are required for corners. Also, varying angles and distances of walls helps, because sound is waves, and if you repeat a movement in increases the wave, so if a sound is the right size of wave, it can bounce back between walls, and make itself louder. There are also other solutions, like diffusers, like this: https://flypaper.soundfly.com/wp-content/uploads/2017/06/diffuser-header-1024x683.png which are just designed to break up the sound, and keep it natural, but avoid buildups or cancellations of certain frequencies. If you're designing a space, and you want to be mindful of how it sounds, breaking up flat walls, and adding soft furniture, and especially book cases. They work very well as diffusers, and they also absorb quite well. So, for people doing remote work from their office or something, if they want more of a professional audio sound, book cases work really well, and so will anything resembling what I described above. For people that want to reduce noise from neighbours, that's a whole extra level, and will require contractors and lots of construction lol. You basically need to build a room inside a room at that point.