Software
Houzz Logo Print
erika_cheung99

Fisher & Paykel 36" induction range

3 years ago

I purchased the F&P 36" induction range in September 2022. When trying to preheat the oven to 400 in convection cook mode, or air fryer, it failed to hit the target temperature. Three parts were replaced and still nothing. The temperature initially will get to 399 and then drop to 361. I was told by F&P that for an oven of this size, it could take up to 30 minutes to preheat, and that the temperature will fluctuate to "maintain the temperature". Fine, but it should reach the temperature before fluctuating to maintain it. I finally got the whole thing replaced...And I'm facing the same issue. Does anyone have any suggestions? I waited 45 minutes and it was still bouncing around at 392-394. In regular bake mode, it preheats just fine within 15 minutes.

Comments (16)

  • 3 years ago

    "it was still bouncing around at 392-394 [degrees]."

    It's 2% less than the selected temperature and operates within a 0.5% range. Do you really think these are going to make a difference in actual cooking? You're not running chemistry experiments.

  • 3 years ago

    I’m not trying to run chemistry experiments. It remains in preheat mode, which is the issue. A range of this caliber shouldn’t function like this. There’s no problem in regular bake function.

  • 3 years ago

    How about preheating it in regular mode and then switching it to convection mode after it heats up?

  • 3 years ago

    I preheated in bake to 400. Once it hit target, I then switched to true convection. The temp dropped and said it was preheating from 354, and climbed up towards but never to 400. I flipped it up to target 425. Once it went past 400, I dropped the set temp back to 400 and then it dinged to say it hit the temp. I’m in talks with the regional service manager of F&P. He’s puzzled and said he doesn’t know what to make of this.

  • 3 years ago
    last modified: 3 years ago

    If you are running it in convection mode then it SHOULD be running cooler, no? It seems to be doing this for you automatically.

    https://www.cnet.com/home/kitchen-and-household/what-is-a-convection-oven/

    “Conventional ovens typically are 25 to 30 degrees cooler than a convection oven set to the same temperature. Since most recipes are intended for conventional ovens, you'll need to adjust the temperature to around 25 degrees F (about 15 degrees C) lower to accommodate the difference.“

  • 3 years ago

    The user manual recommends lower temp for "aero cooking" but the range doesn't adjust the temp itself.

  • 3 years ago

    What’s aero cooking? The manual also recommends to condition the oven at first use which involves setting the oven to 400 in true convection for 20 minutes.

  • 3 years ago

    Stephanie, yes. This is true. Convection mode cooks differently so you can set the temp 25 degrees lower, or the same temp for 15 minutes less. But an oven shouldn’t sit in preheat mode forever. It should be able to hit the temperature you want to set it at.

  • 3 years ago
    last modified: 3 years ago

    "What’s aero cooking?"

    You didn't state which model you have. The user manual for the OR36SDI6X1 refers to convection cooking as aero cooking.

  • 3 years ago

    RIV3-365

  • 3 years ago

    Update: third appliance repair company came to inspect. Oven hits the temp on convection mode when set to 400 (based on thermometer placed in oven) but display remains in preheat mode. It does this for 350F, but not for 360F, 425F, 500F. It’s a toss up as I haven’t tried all the incremental temps. F&P has been silent on this but think it is worth knowing when purchasing this particular model.

  • 3 years ago
  • 3 years ago

    Artemis78 I’m not sure if this effects all but it is most certainly a design flaw. Wdccruise which model do you have? I was looking at the classic line and was going to ask F&P if they would downgrade my model for this one instead.

  • 3 years ago

    " . It does this for 350F, but not for 360F, 425F, 500F. "


    Engineer here. That sounds like a software bug. Hopefully it works at one of the incrementally closer temps for you! Dumb that they didn't catch that, but testing takes time and costs money, so I can imagine they just said "good enough! Sell it!"


  • 3 years ago

    I received a third model with different sku. I purchased the oven in September 2022 and got my third replacement after several rounds and self-advocacy, it now works well.

Sponsored
Wannemacher Interiors
Average rating: 5 out of 5 stars26 Reviews
Customized Award-Winning Interior Design Solutions in Franklin Cnty OH