Software
Houzz Logo Print
mtnrdredux_gw

You were right, I was wrong

3 years ago

Some of you tried to tell me to buy something "off the rack" versus having a windowseat made for the dining area in our new place. For a whole host of reasons, I have come to the same conclusion.


Only I have a problem and I can't think of how to solve it or even phrase it. If I could, I might find a good answer on the internets (sic).


Anyway, I want a curved bench (dining height) between these two windows (a curvilinear span of ~50"). How do I find something that size with the "right" curve?




Comments (48)

  • 3 years ago
    last modified: 3 years ago

    Other than drawing it out on paper and checking it in real life against the furniture piece you want to buy, I have no idea. If it were me, I would buy two round backless stools that are of dining height and use those. If you cannot find any high enough, you could always add casters or different legs to the bottom to raise the height.


    I use a stool at my parent’s house because their breakfast table is too close to the window for easy maneuverability.

  • 3 years ago
    last modified: 3 years ago

    i think what I am trying to measure is an arc length but I sure don't see that in any description. And most furniture isn't stocked IRL anymore

  • 3 years ago

    Do you want the curve to fit the table or the windows? They look to be of different shapes...


    I have a visceral reaction to rounded benches at a table as they remind me of picnic tables.


    Also, if it's one larger bench, that means it can't be moved by whoever is sitting there to scooch in or out or get in and out of that side....


    ...that is if I'm picturing what you are...

  • 3 years ago
    last modified: 3 years ago

    Way fair has surprisingly good search filters, including specific ones for height, width, etc. I'd enter curved bench in the search box and then input your measurements in the search filter on the side.

    You'll probably have to email for curve measurements but this will narrow down your search.

    And, of course, if you see something you like, right click and see if it is on other sites. Way fair's prices are very "fluid".

  • 3 years ago

    A small, curvilinear upholstered bench, prob with a back, to fit inthe 50~ space between the two windows.


    The issue is the arc of the curve, I think. I see no way to spec that

  • 3 years ago

    I don't think you'll have much choice...it looks like the shape is just round like the table and it fits the widest width at the back with the seats tapering in for the usual seat depth. This one from Wm Sonoma is 48" wide so would just fit...your choice of upholstery.


    https://www.williams-sonoma.com/products/garbo-customizable-banquette-upholstery/?catalogId=79&sku=1728949&cm_ven=FreePLA&cm_cat=Google&cm_pla=Furniture%20%3E%20Dining%20Chairs,%20Benches%20%26%20Banquettes&region_id=669950




  • 3 years ago

    I was thinking something like this:


    mtnrdredux_gw thanked Fun2BHere
  • 3 years ago
    last modified: 3 years ago

    No, ive seen shallower curves. If memory serves, PB owns WS. I think this is the same thing i saw on PB. It is half a semicircle, which i think means a 90 degree arc? But my table is oval so it def is not a 90” arc and i don’t think my wall has a 90 degree arc either ?

  • 3 years ago
    last modified: 3 years ago

    How about a cute sofa like this one from Perigold? I’ll bet if you called them they would know or measure for you the curvature of the piece.


    mtnrdredux_gw thanked Kswl
  • 3 years ago

    Wonder if any of these would work.








    Or have a bench made (not built in) and have a cushion sewn for it.

    mtnrdredux_gw thanked Sueb20
  • 3 years ago
    last modified: 3 years ago

    I love this one, but it is too big. Mitchell Gold (RIP) used to have something similar that I really wanted. Wonder if you could find one on 1st Dibs, Chairish, etc?




    This is substantially smaller, but not small enough. And it would be a bear getting around the ”arms” to get seated.



    mtnrdredux_gw thanked bbstx
  • 3 years ago

    Getting closer… 56 1/2” but for dining, I’d want something other than bouclé




    PB 47” curve




    mtnrdredux_gw thanked bbstx
  • 3 years ago


    Found this on Chairish. No back and you would want to recover, but it looks like it might be about the right amout of curve.

    Custom bench

    mtnrdredux_gw thanked Fun2BHere
  • 3 years ago

    Questionable Quality, but cheap enough to give a try.



  • 3 years ago

    Thanks guys, youve given me a lot of good leads!

  • 3 years ago

    I found I was getting better hits with a search term including the word ”banquette”

    mtnrdredux_gw thanked bbstx
  • 3 years ago
    last modified: 3 years ago

    Does it have to have a back? I've seen benches having separate back cushions mounted on the wall.

    I think you could likely just eyeball the curve. Finding the right length would seem a bit more tricky.

    Some brainstorming ideas - ignore the colors...












  • 3 years ago

    The middle one you show, the blue with the back, had a very helpful aerial view! Where did you find the first and second ones, Carolb? thx

  • 3 years ago

    If that is a genuine Knoll Saarinen table, the table height is lower than a traditional dining table.

    28-1/4" if my memory serves, which is 2 inches lower than many current tables. That should give you some leeway. That still might not be enough though, to prevent the feeling that the table is too high for many sofas or love seats unless the deck is very stiff and the cushions very firm.

    mtnrdredux_gw thanked palimpsest
  • 3 years ago

    That table was from the staging company and is found here: https://www.amazon.com/gp/product/B0BY6V6QZK/ref=ox_sc_saved_title_1?smid=A76OMJF6WLZ7F&psc=1


    I thought it looked pretty nice, fit well in the space, and, unlike some knockoffs. was sturdy enough to lean on when you got up (I read somewhere that can be an issue, and that most of us do this without thinking). So I will probably buy it.


    Anyway, I measured the height of the chair they paired with it, since it worked well, and am using that for selecting a bench/settee.

  • 3 years ago

    Hold on a minute, did you say "new place?" What?? I've scanned the back 5 pages and can't find anything, but I tend to read too fast and miss stuff. :) Is this a townhouse?

  • 3 years ago
    last modified: 3 years ago

    On the lines of Pal,

    I too was thinking of height. Even if something is custom made it will block window trim.

    Personally, I like the way you can see all of the windows.l

    I'm not a fan of sitting on a bench seat without a back.

  • 3 years ago

    I agree, there is 50" between the windows, so several of these options dont block the window trim; i would not choose one that does. Yes, I am only considering benches with a back.

  • 3 years ago

    Ah, I see...from the pic, I thought it was just the camera angle that made it look oval and that it was a round table.


    Are you trying to fit something up against the wall? Or do you just want a rounded seat that will fit the curve of the table? If on the long side of the oval, I suspect the curve isn't much.


    The sectional piece I posted is not 90, but less...probably 45...they do have the 90 there as well...though that look is much blockier than the rest of your furnishings.


    I can think of a couple of ways to get an approximation of the curve, but I don't know what to do with that info unless you can see the piece in person and measure it.


    You can take something straight and place it from trim to trim on the windows, then go to the center between the windows and measure the depth.


    You can take the two chairs you have and place one on each edge of the window trim. Then measure the distance across the front of the chairs and again off the back of the chairs to see how much larger the back edge must be from the seat edge.


    mtnrdredux_gw thanked Annie Deighnaugh
  • 3 years ago

    I can think of a couple of ways to get an approximation of the curve, but I don't know what to do with that info unless you can see the piece in person and measure it.


    Yes, that is exactly the issue! I am sure the info exists, because these pieces of furniture have to be produced from blueprints of a sort. But try getting that out of like, Wayfair customer service, is not going to happen. PB is supposed to investigate and get back to me.



  • 3 years ago

    I have a feeling that this is something you can't order unless custom. You may be lucky though on an antique/furniture consignment/auction deal but it would require patience and time.

    mtnrdredux_gw thanked Annie Deighnaugh
  • 3 years ago

    I googled ”custom curved dining bench” and a lot of readymade option came up

    mtnrdredux_gw thanked jojoco
  • 3 years ago

    I have a feeling that this is something you can't order unless custom.


    Maybe, but if that is the case id rather have a built-in bench.

  • 3 years ago

    Those are all from a Google Image search for 'curved upholstered bench'. I'll have to go back and find that result in my history, but I don't have time rn.

    IIRC the blue-gray one with the back might be from Lowes or HD.

  • 3 years ago

    No worries, i will do an im age search. Thanks!

  • 3 years ago

    I checked and I was right, the image was from Lowes, but they show it as out of stock - believe it or not Walmart has it too...

    https://www.walmart.com/ip/Inspired-Home-Alaya-Grey-Velvet-Bench-Upholstered-Button-Tufted/808896645

    It actually looks like the seat doesn't have a curve to it - just the backrest.

    mtnrdredux_gw thanked carolb_w_fl_coastal_9/10
  • 3 years ago

    I think the best one I have found so far is this one, with a very helpful aerial view.

    It is from Amazon of all places, and 350. But the shape and dimesions seem spot on, free shipping and returnable. Might be worth trying; right now this color is out of stock tho.



  • 3 years ago
    last modified: 3 years ago

    If its relatively inexpensive you could also have or recovered or slipcovered. It looks comfy.

  • 3 years ago

    Exactly. Even if it is flimsy we could probably shore it up.



    Look at the photos I found on the Mfrs site: (please shield your eyes)





  • 3 years ago

    Do ypu want the front or back, or both curved?

  • 3 years ago

    I think just the back but thanks for adding another level of trigonometry (?) to this LOL!

  • 3 years ago
    last modified: 3 years ago

    wow, it is but boy that is lovely!


    And you have inpsired me --- logically, a lot of curvilinear stuff is caning ... off to add that to my search. Thx!

  • 3 years ago

    [trying to figure out how/where to use the Crate and Barrel cane settee that I have absolutely no need for and no place to put]

  • 3 years ago

    I know really, BBSTX me too. It is so lovely.


    Ironically, the chair, which I could find a home for, is more money!




    I was thinking in my sunroom. My furniture plan does include a chair; where I show a grey chair in the top right corner here:



    It might seem modern for the room but keep in mind my sofa is a big sectional and more modern than the one I used for the mockup.



    Also odd that they show it outdoors but I am pretty sure you cannot do that.



  • 3 years ago

    I love spending other people’s money!😂

  • 3 years ago

    Hmm, this sent me on a chase for cane/rattan barrel chairs. I like this better and I could easily repeat the chintz on the cushion.



  • 3 years ago
    last modified: 3 years ago

    I really like that cane settee ... and what a great price! I actually have multiple places I could use it ... if the seat wasnt white, I would use it as seating in my breakfast room. It is the perfect length for the space. Unfortunately, I don't trust myself with white and a cup of coffee... or kids with fruit or chocolate!

    Of course, at that price, I could justify recovering it.


    Mtn I really like the cane/rattan in your room-- I think you're on a great path. It is going to be a beautiful room with a "collected" feel but a very cohesive design.

    mtnrdredux_gw thanked Funkyart
  • 3 years ago

    Mtn, where did this barrel chair come from? I like the direction this has taken.




    mtnrdredux_gw thanked Allison0704
  • 3 years ago
    last modified: 3 years ago

    Allison, I was pretty sure that I wanted a chair that I could at least partially reupholster w the chintz, so I did a search for cane/wicker/rattan barrel chair, and I found this on Kaiyo. I have looked there before but it will be my first purchase from them. We will be not too far from their warehouse when we go to Phila. to get the 1st Dibs table so we don't even need to ship it. Win-win.

  • 2 years ago
    last modified: 2 years ago

    Thank you for the info. I have been rethinking our living room and might do a different pair of chairs.


    ETA: Did not realize Kaiyo was a resale website. So char was sold at C&B. Heck, I live in FL and woven chairs are a dime a dozen. LOL

Sponsored
NME Builders LLC
Average rating: 5 out of 5 stars2 Reviews
Remodeling Company in New Albany, Ohio