Software
Houzz Logo Print
heather_jubinville48

Easiest way to waterproof a windowsill?

2 years ago
last modified: 2 years ago

My landlord has been globbing spackle over my windowsill repeatedly in an attempt to fix the issue of it crumbling apart.

Come to find out whats crumbling off my windowsill IS the spackle and I am sick of breathing in and vacuuming up spackle dust.

Is there some sort if waterproof paint I could use to fix this issue?

Please provide as much detail as possible as ai am lrepared to go to Lowes today and DIY this.

thanks


Comments (6)

  • 2 years ago

    It looks very much like you have a leaky window. That should be prepared before anything is done to the window sill. Once the window is repaired, then, use sheetrock mud, and sand it smooth, and primer it and a couple coats of paint. Nothing will work, with a leaky window, because the moisture just disolves it.

    Heather Jubinville thanked cat_ky
  • 2 years ago

    @cat_ky : it is damp from the rain last night. 4th floor prewar building, steam heat - windows stay open year round. the top sash also slips and they wont replace it

  • 2 years ago
    last modified: 2 years ago

    It wouldnt be damp from last nights raink, if it wasnt leaking. I see mold close to that window. It leaks a lot. Your landlord is doing a right repair, but, it will not hold up with moisture because, it all disolves, when it gets wet. I wouldnt be surprised if wood in that wall, is rotted and has mold either.

    Heather Jubinville thanked cat_ky
  • 2 years ago

    The window frame is probably cold and condensing room moisture that then soaks into the adjacent wall materials. Could be the result of a lower grade window and/or air infiltration between the window and frame, or through the window gaps themselves. Spackling and drywall will not tolerate being continually wetted, they will crumble. The framing behind will potentially rot and/or grow mold as well. What can be done? Lower the indoor humidity to desert conditions (not healthy), turn the heat way up to warm the window frame (costly for you, hard to bear the room temps needed), or replace the window with a thermally broken and lower heat conductivity frame unit (costly for the landlord). If all that can be done now is to replace the drywall around the window, what might help is foaming the gap between the window and framing with low expansion foam (stops air infiltration) and installing a plastic j-molding to the window/drywall interface to separate the cold/wet window frame from the drywall.


    https://www.buildsite.com/pdf/trimtex/J-Bead-Installation-Instructions-2232688.pdf

    Heather Jubinville thanked HU-867564120
  • PRO
    2 years ago

    Heather:


    On a sunny day with no condensation on your window, note how wet the area is, then hose the window for 10 minutes or so and check it for leaks please. You have to determine if this is an installation problem (probably) or a condensation problem (unlikely) and let your landlord know. If it is an installation problem, this is not a DIY project, particularly for a renter.