Software
Houzz Logo Print
julia_lee51

Microwave drawer too big

11 months ago

I got 30” microwave drawer and cabinet cutout out to fit it and once it was installed it looked too big for our kitchen and seemed dominating the space. I really want to change to 24”, is there any way to fix it so it looks nice? Please help this is my first home!

Comments (19)

  • 11 months ago


    You have a Cosmo product. They have an all black version. If you prefer that look, see is your appliance dealer will do an exchange. For a stainless with less stainless look at the Sharp models.

    A little less trim width.

  • 11 months ago

    Thank you! This is full layout, I have lazy susan right side of the microwave, and sink/oven/ more cabinets on the other side.

  • PRO
    11 months ago

    It is not the "full layout" .........: )

    Show the kitchen in its entirety

  • 11 months ago

    Julee the pic you show is fine to be able to see the microwave in place. Since you are still in the construction phase, please wait until your kitchen is complete. Right now, every single thing seems to be the focus on its own, but when all is completed and you're living/using the kitchen, that microwave is going to be just fine. You probably will be glad at some point to have one that size.

    Your cabinets are beautiful!

  • 11 months ago

    I think the microwave looks fine. The cooler seems to protrude further than the microwave, so will the cooler have the same cabinet base moulding around it?

  • 11 months ago

    This is the cabinet. I wish there was space between the cooler and microwave. I think I am leaning towards keeping the size but changing the microwave to black one!

  • 11 months ago

    This is the other side and I love it!

  • 11 months ago

    Agree with the advice to take a deep breath and finish the kitchen, if it still bothers you in 6 months you can consider alternatives

  • PRO
    11 months ago
    last modified: 11 months ago

    Made my point with the pic : ) leave well enough alone!

    Were I to change ANYTHING? here... It would be the range: ) and lose the bulky riser /back. The micro is fine, change to black if you must, but I would not.

    Enjoy your new space!

  • PRO
    11 months ago

    Dan 1888's suggesting of the all black version of the microwave is an excellent one.

  • PRO
    11 months ago
    last modified: 11 months ago

    The biggest issue is the coming glass smash when someone is not careful to open the LS door carefully by hand and just let's fly. That's a poor location for a MW. And any appliance next to a corner cabinet is a poor design. Replace that with drawers, and just do a small MW on the counter somewhere.

  • 11 months ago

    Tell your contractors you want your new counters covered before they have all their tools on them.

  • 11 months ago
    last modified: 11 months ago

    ^^ Second what pkpk23 said. When we redid our Kitchen, they covered all the counters with a very heavy-duty cardboard as soon as they were installed and kept them covered until the Kitchen was done. This prevents inadvertent staining, etching, scratching, etc.

  • 11 months ago

    If you really want to get the black, I would attempt to do it sooner rather than later. I doubt anyone will exchange it after 6 months -- it may be too late even now due to the return window and/or the fact that it's already installed. It's not a defect, you just don't like it.

  • 11 months ago

    I’d have to think it’s past the window of opportunity for an exchange.

    I understand the concern, and think the placement next to the narrow cooler is the main issue. Not much to do about that now. This would be my course of action:

    1) Live with it for a bit and decide if it actually bothers me after I stop staring at it all the time.

    2) If I’m still bothered by it, vinyl wrap it in black.

    3) If I’m happier with the black, live with it for a while see how well the wrap wears.

    4) If I prefer black and the wrap does not wear well, I’d suck it up and buy myself a birthday present. Costlier mistakes have been made.

  • 11 months ago

    You are going to need to be very careful with opening and closing the corner cabinet door. Or you will have a $600 door replacement bill.

  • 11 months ago

    The corner cabinet should have been hinged the opposite way so the corner cabinet door can open as wide as possible. The microwave protrudes a little so it'll restrict some of the opening allowance. You could request a door be remade and rehinged if you find it to be an issue.

  • 11 months ago

    I think it looks lovely