Software
Houzz Logo Print
kalenayoung

what do you look for in choosing engineered hardwood flooring?

last month
last modified: last month

thickness?

wear layer minimum?

warranty?

Here is the spec sheet for the one I'm considering:


Construction: Engineered High Density Ply Core Hardwood with Tongue and Groove

Edge Profile: 1-2mm Micro Beveled Edges and Ends

Species: French Oak

Installation: Nail, Staple, Glue, Float; Above Grade, At Grade, Below Grade

Dimensions: 9/16" (Nominal Overall Thickness) X 8" (width X 75" (75% long boards)

Surface Treatment: Hand Scraped and Wire Brushed

Thickness of Surface Layer: 4mm Gloss: 6-10 degree

Cutting Method: Sawn Faced

Fire Testing ASTM E648 and ASTM E662 Results: Class II

ASTM E84 Result: Class B

Grade: Nature Grade

Color Variation: Moderate Color Variation, Water Based Color

Mediterranean Collection™ Specifications

Thickness Deviation: ±0.2mm

Reactive Stain: Smoke+Reactive Stain

Surface Abrasion Resistance: ≥300r, S-33 Sand paper

Film Hardness: ≥2H

Static Bending Strength: ≥30MPa

Moisture Content: 6%-9%

Packaging Area per carton: 25.07 Sqft. per Carton

Weight per carton: 48.06 Lbs

Warranties: 50 year residential finish warranty. 5 year

commercial warranty. Please visit www.californiaclassicsfloors.comfor the most current warranty information.

Environmental Certifications: Floor Score Certified

Carb II Compliant: Yes

Lacy Act Compliant: Yes

4mm GLOSS

Finish: UV-cured aluminum oxide enhanced Valspar urethane finish.

Color depth through smoking, aging, multi-step treatment, and hand stained for weathered patina. On-trend colors.

Assembling Gap: ≤0.20mm

Length Deviation: ±0.5mm

Width Deviation: ±0.15mm

Comments (7)