Software
Houzz Logo Print
cepowers77

"pebble look" tile for shower floor

13 years ago
I'd like to use "pebble look" tiles (Specifically Emser Venetian Pebbles) for our shower floor but our contractor says they can be problematic and a hassle to maintain. (grout, etc.) The ones I've selected are flat and are fairly close together. Any advice or experience with this type of tile for the bottom of a shower?

Comments (19)

  • 13 years ago
    They are real pebbles, aren't they? That's what I'm considering for the remodel I'm beginning. These look like the "sliced" version. I was advised that sliced are easier on the feet than the natural smooth ones but not of any issues with maintenance. Eager to hear input.
  • 13 years ago
    Well, I think they're tile made to look like pebbles. They come on "mesh" backing. These are smooth/flat. (I also thought easier on the feet) They're VENETIAN PEBBLES by Emser. I guess they can be more trouble to grout. One tile store recommended a different type of grout (epoxy?), as it holds up better and doesn't have to be sealed. It's more expensive but may be worth it long-term.
  • 13 years ago
    Apparently they can also be more trouble to keep clean!
  • PRO
    13 years ago
    We did these, and once grouted they take a much darker appearance. To avoid drainage issues do linear drains .
    Clair thanked sbroad
  • PRO
    13 years ago
    Don't listen to your contractor he has no idea what he's talking about! Either he doesn't have the experience and skill to install himself or doesn't have a tile setter with the experience and skills to do the installation correctly. I proactively recommend 'pebble' shower floors to all my customers!

    I have a black pebble shower floor with Charcoal color grout (see below) in my own shower and have had it for seven years without an issue. It's wonderful on the feet, provides slip resistance, and looks great! I have also installed several other 'pebble' floors for my customers (See below and See my 'Shower Floors' Ideabook http://www.houzz.com/ideabooks/18191507/thumbs/Shower-Floors). All my customers love them and have had no issues.

    You do need to know what your doing when you install the interlocking sheets to make sure you hide any visible pattern of interlocking. I typically layout the dry sheets and precut them to fit together and fit the shower floor including around the drain as this saves time and effort once. I also precut the edges of the sheet (stones are offset for interlocking pattern so I cut the offset stone in half along the edge of the sheet so that the pebble sheet will be flush against the wall with no need to add individual stones to fill the interlocking gap. Then I spread my thin-set using 1/4" x 1/4" V-notch trowel and install the tile. I usually install the floor first or space the wall tile from the untiled shower floor so the pebbles will fit under the wall tile for a better looking edge and one that will be more water proof (water runs down wall tile which overlaps floor tile. For grouting you need to really wash the grout out well to expose the stones which is where many tile setters goof up the job and don't wash enough grout out. Standard modified sanded mortar grout (e.g Custom Polyblend) works fine. No need for specialty and more expensive grouts.
    Clair thanked Custom Surface Solutions
  • PRO
    13 years ago
    Sorry the lower right picture is not pebbles. Below is the correct picture from this customer and I selected the wrong shower floor.
    Clair thanked Custom Surface Solutions
  • 13 years ago
    Yes, a good installer is ALWAYS important! I am not familiar with the product this questioner asks about but do know there are many real stones available, also on mesh. Why choose fakes? Another tip my tile store gave me for selecting the right look is to wet the stones unless they have been sealed for display purposes. Water will bring out the color and create a sheen so you see what the pebbles will look like when they are sealed.
    Clair thanked lindaandmike132
  • 13 years ago
    Wow - thank you so much for the feedback!
  • PRO
    13 years ago
    In response to lindaandmike132 - Why not fake? If they look and feel like real stones what's the issue? Water will bring out the color but a sealer will not necessarily bring out the color if it's not an enhancer. A clear matt sealer will simply seal with no color enhancement or 'wet look'. An enhancer will bring out the color and give a 'wet look'.
  • 13 years ago
    Thank you for the information, if I go with the pebbles I will make sure the sealer is also an enhancer.
    I just like REAL and haven't heard of any advantage to fake stones. Maybe less expensive? I am also using "real" stone tile ... though I did consider porcelain and understand the advantages there.
  • 12 years ago
    I also have the pebbles in my shower and it looks unique, drains well, is not slippery, and a great accent to a shower. Very happy with my pebbles.
    Clair thanked Lori Bell
  • 12 years ago
    Thank you! Our contractor just "installed" ours over the weekend. He complained about working with them and I'm not 100% pleased with a few things he did but overall, they look great! Our shower fixtures aren't installed yet so we haven't "tested" them yet.
  • 12 years ago
    Bam Bam likes pebbles.
  • 10 years ago
    last modified: 10 years ago

    I installed these on a backsplash and although they look great, it did take me awhile to do a good job, quite a bit longer than rectangular tile would take. You can't just place them next to each other, they need to be situated right to fill in gaps and get an even distribution of the different colored pebbles. The pebbles can be peeled off of the mesh and used to fill in different shaped gaps, like a puzzle. Since I was the homeowner, I could take my time. With a shower floor you wouldn't need to be as careful, but personally, I wouldn't use them since they'd require more maintenance (regular resealing, more exposed grout) but many people do. Also, if you wipe away enough of the grout so that the stones are exposed, there will be "hills and valleys" that might prevent effective draining compared to regular tiles if the slope of the shower pan isn't steep enough. Leaving more grout would result in a flatter surface, but wouldn't look so good. The sliced pebbles might be better in this respect. I think they are real, not fake pebbles.

  • 7 years ago

    We used Emser Flat Venetian Pebble Silver and they turned out totally different that what the showroom board that was grouted looked like. Be careful because now Emser and the supplier claim the grout did this. First pic is from Emser site. Second is the installed product.



  • 5 years ago

    I think the installed is beautiful. Is it the color or the shine you don't like--because the shine is caused by the sealer (which is optional) but much easier to keep clean.


  • 5 years ago

    The problem is the color. There are numerous brown pebbles which we didn't want. The brown, while it can be a nice contrast, really does not go well with our bathroom tile. The predominantly gray pebble layout as seen in the showroom tile wasn't what the final product looked like when wiped down.

  • 5 years ago

    Was the pebbles sealed prior to installation? If you grout without sealing the pebbles, it will change the color.