Software
Houzz Logo Print
kswl3

Too Many Velvet Sofas?

12 hours ago

I just ordered a new sofa for our master bedroom (to be delivered in mid January) and am also looking for fabric to reupholster the two sofas in our main living area. I picked a very lovely, soft mushroom colored performance velvet for the bedroom. Whiile choosing the bedroom sofa color I found a swatch of the same velvet in a besutiful deep caramel color that I think would work beautifully on the matching sofas in the LR. So…is it weird ro have three of the four sofas on this floor of the house in the same type of fabric? Additional info: two large upholstered chairs in that main living area are already navy velvet.

Clearly, I love velvet. But is this too much? My original intention was to get a herringbone weave like the fabric that is on those two sofas now. Or possibly a wool flannel or boucle— something with a little texture. What do you think? Keep looking and try tofind that caramel color in a different fabric? I cannot use any print fsbric in the living room because my large rug 12’ x 15’ is very bossy, iI.e. highly patterned and colorful.


1. Look for a different fabric, enough is enough!

2. What, there’s a velvet police? If you like it, use it.

3. Really? Now we have to pick your sofa fabric too?

Comments (17)

  • 12 hours ago

    Personally, I would like a different fabric because of the two chairs that are already in velvet. I like your idea of using herringbone or other small pattern that almost reads as a solid from a distance.

    Kswl thanked Fun2BHere
  • PRO
    12 hours ago

    I like velvet too--I have 2 velvet wing chairs and a velvet sofa in my living room, and velvet chairs in the adjoining sun porch. If you like it, why worry about what someone else will think? No one has ever come to my house and commented on the velvet upholstery!

    Kswl thanked Diana Bier Interiors, LLC
  • 11 hours ago

    I agree with Fun. A mix of fabrics would be better. And from this 1,500 sq ft homeowner….three sofas😳

    DH says we’d have to buy another house so I can collect more chairs and cabinets. Alas……..

    Kswl thanked 1929Spanish-GW
  • 11 hours ago

    So we have a 1 and a 2!


    Diana, I am truly not worried about what people will think of it once it’s done; rather, I am wondering if too much of the same fabric everywhere is just too much, and perhaps I’m missing an opportunity to bring nore interest into the room with a texture—-especially as I am using only solid colors.


    Fun, I wish someone would knock on my door with a sample case of fabric memo samples! I really do not want to have to go looking for a fabric— that one just fell into my lap like manna from heaven. 😁 I have talked with a couple of ID’s and they are not interested in doing anything except big projects. and entire rooms. All these refresh projects I have going on don't interest them in the least, even in the aggregate. I am also finding that where they used to work either on an hourly basis or cost plus on goods and labor they are now charging both time and cost plus. One very nice one wanted to charge $1600 to select a sofa and cost plus 40% on the item, including delivery charges. So for a sofa I could buy at retail for say $5000 I would endup paying at least $7500. Most experienced designers already have manufacturers and models they use over and over again because they like the look and know the brand. it seems crazy to me to charge a six hour fee to select something like that — after they’ve already gotten the initial consultation feesfor the floor plan and discussion of what you like and want. Trips to market showrooms I understand are subject to the hourly fee, but selecting one of the manufacturer’s fabrics is not the same amount of work. IMO of course.

  • 11 hours ago

    Two 1’s and one 2 😁

  • 9 hours ago
    last modified: 9 hours ago

    @kswl, do you have a design school near you? Sometimes a student or newly graduated designer will be willing to take on smaller projects. Since you already have a strong sense of design, you could give them parameters and let them source fabrics for you.


    ETA: Have you tried AI to source fabric for you?

    Kswl thanked Fun2BHere
  • 8 hours ago
    last modified: 8 hours ago

    #1.

    I've had two sofas that read solid (and soft), but with a teensy design detail. One was mushroom and the one other medium coral. Keep looking.


    How do you feel about a one color fabric, but with various shades of that color throughout to give ti depth and visual interest? It would still visually read solid.

    Kswl thanked Allison0704
  • 6 hours ago

    Why not keep the caramel swatch and look for other fabrics for a while? Velvet is beautiful and comfortable but it doesn't hurt to look for a bit, after looking you can more easily decide what would be best in your situation,

    Kswl thanked lucille_444
  • 2 hours ago

    I don't think the MBR sofa is relevant, but how close are the navy velvet chairs? I think two diff colors of velvet in the same room is suboptimal.

    Kswl thanked mtnrdredux_gw
  • 2 hours ago

    Mtn, Each sofa is adjacent to a navy velvet chair, so close!


    Allison, I would def be amenable to a fabric that was one primary color but had other colors in the warp or weft.


    Fun, I haven't. Since i I don’t whati am looking for it would be difficult to come up with a question that would be productive. I don’t know how to describe color within the parameters of AI’s ability. Any suggestions? There is a big design school in our state (SCAD) with a campus in Atlanta. We are a good drive from there but there might be some new grad willing to come down. I don’t think color is so something you can pick solely from a picture.

  • 2 hours ago

    Didn't you have an ID you have used for years?

    Kswl thanked mtnrdredux_gw
  • PRO
    2 hours ago

    I have lots of pattern in my living room in curtains and pillows, as well as a chair in red toile. So I guess if you are doing all solids, maybe too much velvet is too much.

    Are you adverse to checks or stripes? Even if your rug has a pattern, you can still use patterns in pillows to break up all the solid colors.

    Your upholstery shop will have lots of fabrics to choose from--have you gone there?

    Could you possibly post a photo to get more suggestions on what might work?

    Kswl thanked Diana Bier Interiors, LLC
  • 2 hours ago

    Yes, he has actually retired.:(

  • 1 hour ago

    I will def be going back to Atlanta to Forsyth, and to Lewis and Sheron, both huge showrooms of higher end fabrics where many ID’s shop. I was really hoping not to have to arrange all this myself, but to find someone who would order the fabric and use their own upholsterer. Both IDs I interviewed told me it wasn’t worth the time to re-cover these sofas, just to buy new ones. I don’t want new ones!

  • PRO
    1 hour ago

    I don't blame you!! I just reupholstered a Baker sofa and it was less expensive than buying a new Baker or similar quality sofa. And I don't think it's the time factor, it's probably easier and more profitable for those designers just to get new.

  • 1 hour ago
    last modified: 1 hour ago

    Diana I am averse to checks or stripes in this particular setting. The small side chairs on either side of this pine secretary are a small navy and white check piped in (you guessed it) navy velvet:


    Since this phot was taken we put a gigantic seagrass mat over the tile and the rug is atop that.

    Also, the upholstered parsons chairs at both ends of the table are a nubby oatmeal fabric banded at the bottom with the same small check.


    You can see the back of one at top right.

    This is the reason I dont want any more pattern.


    The lighter blue chair will also be recovered. I might consider a tone on tone fsbric for that. Both fsbrics need to go with each other, the rug and the navy chairs.


    This is the color I like

    And I did just try it on the existing sofa and it is TOO LOUD!

    I need this in a lighter and browner hue, perhaps? This is why I need help!

  • PRO
    27 minutes ago

    A thought from the upholstery side. With a navy velvet chair right next to each sofa, the issue is less the amount of velvet and more two pile fabrics with a similar sheen touching each other. A caramel with a matt, dry surface would give you the contrast you are missing while still reading as a solid: a wool or wool blend with a slight slub, a fine chenille, or a cotton or linen velvet, which has a much quieter sheen than most performance velvets.


    On the colour that felt too loud: velvet changes shade with the direction of the pile, so judge a large piece, not a small swatch, laid flat and then draped over the arm, in daylight and in the evening. The same dye in a flat weave looks softer and a little lighter than in velvet, which may bring you closer to the hue you describe.


    If you do stay with velvet, ask the upholsterer to cut every panel with the pile running the same way, otherwise seat and back cushions can look like slightly different colours. We make upholstered furniture in our own workshops in Brianza, a few kilometres from Milan, and this is the first thing we check on every velvet piece.


    Brianform e Stoneform

    Kswl thanked Brianform & Stoneform
Sponsored
Schlabach Woodworks
Average rating: 5 out of 5 stars22 Reviews
Franklin County's Reclaimed Wood Professionals