Software
Houzz Logo Print
jshefflin

how do you prevent the plaster from cracking with the high heat from t

12 years ago
how do you prevent the plaster from cracking with the high heat from the fireplace?
Beachaus I Master Bedroom · More Info

Comments (8)

  • 12 years ago
    So, do you have to remove the drywall to install the plaster? Does plaster work well in damp bathrooms?
  • PRO
    12 years ago
    typically you plaster over drywall, except in high heat or moisture prone applications where you would plaster over concrete board. Plaster can be used in wet locations if sealed correctly. It is naturally anti-microbal (lime) and inhibits mold growth
  • 12 years ago
    I'm trying to replicate this look in my own home and have the same fireplace (or similar at least - is that the Montigo P-series?). Did they apply the plaster directly over the metal facing trim that is part of the fireplace itself? Or was cement board installed over the fireplace trim prior to the plaster application? Thanks!
  • PRO
    12 years ago
    The substrate needs to be impeccable. Quality plaster can handle the heat but if the concrete board etc. underneath has any seams you may run into issues. The fireplace above was cut out of a single sheet of high strength concrete board in order to avoid any seams at the corners of the opening.
  • 12 years ago
    Interesting. So the entire face is one piece of concrete board from floor to ceiling, corner to corner? What was done on the outside corners where it head back towards the windows? Thanks for your response.
  • PRO
    12 years ago
    The largest area of concer for heat is within 4' on the sides and top of the fireplace. We always make sure to use a full sheet of concrete board usualy 4*8 1/2" the outside corners are finished with corner bead to keep everything straight. Any and every seam "Must" be tapped or It will crack.
Sponsored
Innovative & Creative Custom Closet Designer Servicing Franklin County