Love this bathroom. Please tell me more about the sink, vanity, etc.

chri22y

12 years ago

Is the countertop same wood as vanity? Tile behind sink.

Lloyd Avenue Residence · More Info

Featured Answer

PRO

Erica Winterfield Design

12 years ago

Thank you very much, I love this powder room as well!

The vanity was custom made and has three doors, each of which have touch-latch hardware so you don't see any handles. The counter is 2" thick and is the same material as the vanity; veneered rift cut walnut with a custom stain.

The tile on the back wall is a Crystal White Quartz Ledgestone from IMAK Tile in Vancouver.

The sink is Acritec, Zen 30152-RM2418 and the faucet is Aquabrass, Volare 61029.

Pendant light is from Arteriors, Arianna Large Pendant

Sort by:Oldest

Comments (11)

cakbxr04
12 years ago
How big is the mirror and how was it attached to the wall? Cleated? it doesn't look like it's right against the wall. Thanks!
PRO
Erica Winterfield Design
12 years ago
Yes, the mirror sits proud of the stone about 1/2" or so. The mirror is 60" x 24" and is glued to a wall mounted piece of plywood that is 1" smaller all around (58" x 22"). The 2" thick plywood was added to the wall first and then the stone was tiled up to it. The mirror was the last to be glued on.
sdoherty123
12 years ago
Who wouldn't love this bathroom. May I ask about the floor? Who is the Manufacturer please?
PRO
Erica Winterfield Design
12 years ago
This engineered floor is from The Sullivan Source in Toronto. It's the Vine Collection, Alaska, Rustic White Oak, hand scraped.
sdoherty123
12 years ago
Thank you Erica. I love your designs and appreciate your detailed response. Wish you had an office in New York!
PRO
Erica Winterfield Design
12 years ago
Thank you kindly :)
lbach
11 years ago
Erica, what type of stone is on the wall, manufacturer, color etc. Thank you!
PRO
Erica Winterfield Design
11 years ago
The tile on the back wall is a Crystal White Quartz Ledgestone from IMAK Tile in Vancouver.
rosehennig
11 years ago
Was it difficult to mount the mirror to the stone? We are planning on putting a ledges tone wall in our master bath, but not sure how to mount pivoting mirrors?? Any suggestions would help.
PRO
Erica Winterfield Design
11 years ago
The mirror sits proud of the stone about 1/2" or so. The mirror is 60" x 24" and is glued to a wall mounted piece of plywood that is 1" smaller all around (58" x 22"). The 2" thick plywood was added to the wall first and then the stone was tiled up to it. The mirror was the last to be glued on.