#PlayHouzz
Hello Mark Harrison, hello Houzz, Hi there,
I found the competition on the Internet and want to participate.
My objects would most likely count as Art, Science oredutainment. But my Amesroom-exhibits might fit quite well! I am a carpenter, interior designer and artist.
I have constructed many of my own art projects with SketchUP in which the use of the program was more virtuous. I have thought of ways that were not provided by SketchUP. But this, unfortunately, does not fit the competition.
I designed and built an Amesroom for a traveling exhibition and a second one for the children's museum "Inspirata". The first can be set up by two men within 30 minutes and is more appropriate for your use. But I want to introduce you to the second one, because I have a lot of beautiful pictures and a short film for it.
I did the whole construction within SketchUP - so that my participation actually results from the use of SketchUp - and isn´t only for fun. So I have actually constructed and controlled the optical effects with SketchUP in 3D! The distorted space can also be viewed from the ideal viewing point in the program, as in reality.
Thus I was able to show my client in advance exactly what will be seen later - and that my design was ok.
The Amesroom shows an optical illusion - a "big and small illusion." The idea goes back to Mr. Ames. My accomplishment and idea is to specifically design the space for the museumspace, so that it matches the actual door and the hallway. It is also built specifically for smaller children- so even they, have the opportunity to appear very large.
The effect of the space can be experienced through a peephole - almost even funnier are pictures or movies that can be done with it - and that applies to any camera or smart phone!
The effects or scenes that can be invented in the room - are limitless: Need to be greater than your Papa - no problem! You took a pill that turns you into a giant within ten seconds? Do the Hulk!
My animation is actually not meant to be beautiful! The SketchUp modelshows all construction joints and plate dimensions - as it was built in reality. Since my 3D model was actually used for the construction and only incidentally for the animation. Now a local television crew was in the museum and filmed in my Amesroom.
So that the animation and film complement wonderfully!
https://vimeo.com/157589785 password: Amesroom
I designed and built everything. The cost of the material was less than 2500,- Euro. Even the distorted image has been edited by me. It shows the town hall of Leipzig - which, of course, every child knows here. The picture is also particularly suited to support the illusion.
I hope you enjoy it!
I now quickly translated with Google because I don't speak English so well. If you want, I can still get a proper translation!
Greetings from Germany
Holger Schulze
Hallo Mark Harrison, hallo Houzz,
ich habe den Wettbewerb im Internet gefunden und möchte daran teilnehmen.
Meine Objekte gehören eher zu Kunst, Science oder Edutainment. Aber meine Amesraum-Exponate passen vielleicht ganz gut! Ich bin Tischler, Innenarchitekt und Künstler.
Ich habe viele eigene Kunstprojekte mit SketchUP konstruiert, bei denen die Verwendung des Programmes virtuoser war. Ich habe Möglichkeiten ausgedacht, die von SketchUP gar nicht vorgesehen waren. Aber diese passen leider nicht zum Wettbewerb.
Einen Amesroom habe ich für eine Wanderausstellung geplantund gebaut, einen zweiten für das Kindermuseum "Inspirata". Der erste kann von zwei Männern innerhalb von 30 Minuten aufgebaut werden und ist für Eure Nutzung besser geeignet.
Ich möchte euch aber den zweiten vorstellen, da ich für diesen sehr viele schöne Bilder und einen kleinen Film habe.
Ich habe Alles mit SketchUP konstruiert – so dass meine Teilnahme wirklich aus der Nutzung von SketchUP resultiert - und nicht nur Spaß ist. So habe ich die optischen Effekte tatsächlich mit SketchUP in 3D konstruiert und auch kontrolliert! Der verzerrte Raum kann aus dem idealen Blickpunkt auch im Programm so gesehen werden kann, wie er dann real funktioniert.
Somit konnte ich auch meinen Auftraggeber vorab genau zeigen, was später zu sehen sein wird und dass meine Konstruktion in Ordnung ist.
Der Amesroom zeigt eine optische Täuschung – eine „Groß und Klein-Illusion“.Die Idee geht auf Herrn Ames zurück. Meine Leistung und Idee ist hierbei, den Raum konkret für den Museums-Raum zu konzipieren, so dass dieser mit der realenTür und dem Flur zusammenpasst. Außerdem ist er konkret für kleinere Kinder gebaut – so dass selbst Diese, die Möglichkeit haben, sehr groß zu erscheinen.
Die Wirkung des Raumes kann über ein Guckloch ausprobiert werden – fast noch lustiger sind Bilder oder Filme, die damit gemacht werden können – und das geht mit jeder Kamera oder Smartfon!
Die Effekte oder Szenen, die man in dem Raum erfinden kann –sind grenzenlos: Willst Du größer sein als Dein Papa – kein Problem! Du hast eine Medizin eingenommen die Dich in 10 Sekunden wachsen lässt? Mach den Hulk!
Mein Animationsfilm ist eigentlich nicht dazu da, um schön zu sein! Das SketchUP- Modell zeigt alle Bauteilfugen und Plattenmaße – so wie es real gebaut wurde. Da mein 3D-Modell wirklich für die Konstruktion und nur nebenbei für die Animation genutzt wurde. Jetzt war ein lokales Fernsehteam im Museum und hat auch in meinem Amesroom gefilmt.
So dass sich Animation und Film wunderbar ergänzen!
https://vimeo.com/157589785 Passwort: Amesroom
Ich habe Alles selber konstruiert und gebaut. Die Kosten für das Material waren unter 2500,- Euro. Auch das verzerrte Bild wurde von mir bearbeitet. Es zeigt das Rathaus von Leipzig – welches hier natürlich jedes Kind kennt. Das Bild ist auch besonders geeignet, die Illusion noch zu unterstützen.
Ich hoffe es gefällt Euch!
Ich habe jetzt schnell Alles mit Google übersetzt, da ich nicht so gut Englisch spreche. Wenn Ihr wollt, kann ich Alles noch richtig übersetzen lassen!
Viele Grüße aus Deutschland
Holger Schulze
I found the competition on the Internet and want to participate.
My objects would most likely count as Art, Science oredutainment. But my Amesroom-exhibits might fit quite well! I am a carpenter, interior designer and artist.
I have constructed many of my own art projects with SketchUP in which the use of the program was more virtuous. I have thought of ways that were not provided by SketchUP. But this, unfortunately, does not fit the competition.
I designed and built an Amesroom for a traveling exhibition and a second one for the children's museum "Inspirata". The first can be set up by two men within 30 minutes and is more appropriate for your use. But I want to introduce you to the second one, because I have a lot of beautiful pictures and a short film for it.
I did the whole construction within SketchUP - so that my participation actually results from the use of SketchUp - and isn´t only for fun. So I have actually constructed and controlled the optical effects with SketchUP in 3D! The distorted space can also be viewed from the ideal viewing point in the program, as in reality.
Thus I was able to show my client in advance exactly what will be seen later - and that my design was ok.
The Amesroom shows an optical illusion - a "big and small illusion." The idea goes back to Mr. Ames. My accomplishment and idea is to specifically design the space for the museumspace, so that it matches the actual door and the hallway. It is also built specifically for smaller children- so even they, have the opportunity to appear very large.
The effect of the space can be experienced through a peephole - almost even funnier are pictures or movies that can be done with it - and that applies to any camera or smart phone!
The effects or scenes that can be invented in the room - are limitless: Need to be greater than your Papa - no problem! You took a pill that turns you into a giant within ten seconds? Do the Hulk!
My animation is actually not meant to be beautiful! The SketchUp modelshows all construction joints and plate dimensions - as it was built in reality. Since my 3D model was actually used for the construction and only incidentally for the animation. Now a local television crew was in the museum and filmed in my Amesroom.
So that the animation and film complement wonderfully!
https://vimeo.com/157589785 password: Amesroom
I designed and built everything. The cost of the material was less than 2500,- Euro. Even the distorted image has been edited by me. It shows the town hall of Leipzig - which, of course, every child knows here. The picture is also particularly suited to support the illusion.
I hope you enjoy it!
I now quickly translated with Google because I don't speak English so well. If you want, I can still get a proper translation!
Greetings from Germany
Holger Schulze
Hallo Mark Harrison, hallo Houzz,
ich habe den Wettbewerb im Internet gefunden und möchte daran teilnehmen.
Meine Objekte gehören eher zu Kunst, Science oder Edutainment. Aber meine Amesraum-Exponate passen vielleicht ganz gut! Ich bin Tischler, Innenarchitekt und Künstler.
Ich habe viele eigene Kunstprojekte mit SketchUP konstruiert, bei denen die Verwendung des Programmes virtuoser war. Ich habe Möglichkeiten ausgedacht, die von SketchUP gar nicht vorgesehen waren. Aber diese passen leider nicht zum Wettbewerb.
Einen Amesroom habe ich für eine Wanderausstellung geplantund gebaut, einen zweiten für das Kindermuseum "Inspirata". Der erste kann von zwei Männern innerhalb von 30 Minuten aufgebaut werden und ist für Eure Nutzung besser geeignet.
Ich möchte euch aber den zweiten vorstellen, da ich für diesen sehr viele schöne Bilder und einen kleinen Film habe.
Ich habe Alles mit SketchUP konstruiert – so dass meine Teilnahme wirklich aus der Nutzung von SketchUP resultiert - und nicht nur Spaß ist. So habe ich die optischen Effekte tatsächlich mit SketchUP in 3D konstruiert und auch kontrolliert! Der verzerrte Raum kann aus dem idealen Blickpunkt auch im Programm so gesehen werden kann, wie er dann real funktioniert.
Somit konnte ich auch meinen Auftraggeber vorab genau zeigen, was später zu sehen sein wird und dass meine Konstruktion in Ordnung ist.
Der Amesroom zeigt eine optische Täuschung – eine „Groß und Klein-Illusion“.Die Idee geht auf Herrn Ames zurück. Meine Leistung und Idee ist hierbei, den Raum konkret für den Museums-Raum zu konzipieren, so dass dieser mit der realenTür und dem Flur zusammenpasst. Außerdem ist er konkret für kleinere Kinder gebaut – so dass selbst Diese, die Möglichkeit haben, sehr groß zu erscheinen.
Die Wirkung des Raumes kann über ein Guckloch ausprobiert werden – fast noch lustiger sind Bilder oder Filme, die damit gemacht werden können – und das geht mit jeder Kamera oder Smartfon!
Die Effekte oder Szenen, die man in dem Raum erfinden kann –sind grenzenlos: Willst Du größer sein als Dein Papa – kein Problem! Du hast eine Medizin eingenommen die Dich in 10 Sekunden wachsen lässt? Mach den Hulk!
Mein Animationsfilm ist eigentlich nicht dazu da, um schön zu sein! Das SketchUP- Modell zeigt alle Bauteilfugen und Plattenmaße – so wie es real gebaut wurde. Da mein 3D-Modell wirklich für die Konstruktion und nur nebenbei für die Animation genutzt wurde. Jetzt war ein lokales Fernsehteam im Museum und hat auch in meinem Amesroom gefilmt.
So dass sich Animation und Film wunderbar ergänzen!
https://vimeo.com/157589785 Passwort: Amesroom
Ich habe Alles selber konstruiert und gebaut. Die Kosten für das Material waren unter 2500,- Euro. Auch das verzerrte Bild wurde von mir bearbeitet. Es zeigt das Rathaus von Leipzig – welches hier natürlich jedes Kind kennt. Das Bild ist auch besonders geeignet, die Illusion noch zu unterstützen.
Ich hoffe es gefällt Euch!
Ich habe jetzt schnell Alles mit Google übersetzt, da ich nicht so gut Englisch spreche. Wenn Ihr wollt, kann ich Alles noch richtig übersetzen lassen!
Viele Grüße aus Deutschland
Holger Schulze
an orthogonal view – in sketchUP
Q