Surface Saver penetrates up to 1/4 to form a chemical bond deep within the substrate to provide long lasting protection against deterioration or staining due to water absorption. Surface Saver will not impair the natural breathing characteristics of treated substrates, nor will it produce a film or coating. Surface Saver will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. Surface Saver will also help to reduce the formation of efflorescence and the growth of mold and mildew. Uses: Unsealed concrete, broom finished concrete, trowel finished concrete, stamped colored concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry. Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications. Surface Saver maintain the natural, unsealed look and feel of the substrate. Will never peel, flake or fade. UV resistant, non-yellowing. No surface film or coating to maintain. Resistant to freeze-thaw cycles and de-icing salts. Provides excellent resistance to mold, mildew, and fungus. Can be applied to interior & exterior, vertical & horizontal, above & below grade surfaces. Surface Saver Sealer will cause water and other liquids to bead off the surface. Breathable, low VOC. 5 gallon covers up to 750-1000 Square Feet in one coat, or up to 500 Square feet in 2 coats. Surface Saver Sealer can be purchased in 5 gallon pails shipped UPS Ground to all 48 U.S. States except Alaska & Hawaii at: www.surfacerestoration.com/shop

Master Bedroom with Red Bed Frame and custom drapery and bedding.
Bedroom - traditional master light wood floor bedroom idea in Charlotte

Victorian black and white tiles in the hallway of a house in Wanstead (E11), laid in what is often referred to as the York Pattern with a Kingsley Border, however sadly neglected for many years after being covered with a heavy underlay and carpet. First we cleaned the tiles with a dilution of Tile Doctor Pro-clean which releases the dirt stuck in the pores of the tiles; the solution was scrubbed into the floor with a buffer machine fitted with a black scrubbing pad and then the released soil extracted with a wet vacuum. The floor was then rinsed with water and extracted again with the wet vacuum. It was left to dry for thirty minutes and the floor inspected which revealed a few stubborn areas that were then treated using Nano-Tech Heavy Build-up remover (HBU) which was left to dwell for forty minutes and then scrubbed and then extracted again with water. To Slow down or stop the possibility of an issue we sometimes have with older floors such as Victorian Tiles we often use a product developed by Tile Doctor called Acid Gel, this is left on the surface for 5 minutes and then removed with light agitation and water and a wet vac machine, the floor is then rinsed with water again just to make sure there is no Acid Gel left in the Tile or on the surface. The Acid Gel not only Keeps mineral salts (efflorescence) at bay but also helps as a bonding agent for the sealer to make sealing theses type of tiles a lot easier. After leaving the floor to dry overnight I came back the next day to seal the floor using four coats of Tile Doctor Seal and Go which is ideal for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. Didi Mohammed Central London Tile Doctor

The previous year Finesse, Inc. remodeled this home in Monrovia and created the 9-lite window at the entry of the home. After experiencing some intense weather we were called back to build this new entry way. The entry consists of 1/3 covered area and 2/3 area exposed to allow some light to come in. Fabricated using square steel posts and beams with galvanized hangers and Redwood lumber. A steel cap was placed at the front of the entry to really make this Modern home complete. The fence and trash enclosure compliment the curb appeal this home brings. PC: Aaron Gilless

Powder room with glam geometric wallpaper complimented with a vessel sink rustic vanity with riveted hardware. Counter top is quartz Viatera - Truffle. Mirror framed wall mirror. Ryan Hainey

Surface Saver Sealer is a water-based Silane-Siloxane water repellent and impregnating sealer for porous concrete and masonry surfaces. Surface Saver penetrates up to 1/4 to form a chemical bond deep within the substrate to provide long lasting protection against deterioration or staining due to water absorption. Surface Saver will not impair the natural breathing characteristics of treated substrates, nor will it produce a film or coating. Surface Saver will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. Surface Saver will also help to reduce the formation of efflorescence and the growth of mold and mildew. Uses: Unsealed concrete, broom finished concrete, trowel finished concrete, stamped colored concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry. Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications. Surface Saver maintain the natural, unsealed look and feel of the substrate. Will never peel, flake or fade. UV resistant, non-yellowing. No surface film or coating to maintain. Resistant to freeze-thaw cycles and de-icing salts. Provides excellent resistance to mold, mildew, and fungus. Can be applied to interior & exterior, vertical & horizontal, above & below grade surfaces. Surface Saver Sealer will cause water and other liquids to bead off the surface. Breathable, low VOC. 5 gallon covers up to 750-1000 Square Feet in one coat, or up to 500 Square feet in 2 coats. Surface Saver Sealer can be purchased in 5 gallon pails shipped UPS Ground to all 48 U.S. States except Alaska & Hawaii at: www.surfacerestoration.com/shop

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

Surface Saver penetrates up to 1/4 to form a chemical bond deep within the substrate to provide long lasting protection against deterioration or staining due to water absorption. Surface Saver will not impair the natural breathing characteristics of treated substrates, nor will it produce a film or coating. Surface Saver will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. Surface Saver will also help to reduce the formation of efflorescence and the growth of mold and mildew. Uses: Unsealed concrete, broom finished concrete, trowel finished concrete, stamped colored concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry. Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications. Surface Saver maintain the natural, unsealed look and feel of the substrate. Will never peel, flake or fade. UV resistant, non-yellowing. No surface film or coating to maintain. Resistant to freeze-thaw cycles and de-icing salts. Provides excellent resistance to mold, mildew, and fungus. Can be applied to interior & exterior, vertical & horizontal, above & below grade surfaces. Surface Saver Sealer will cause water and other liquids to bead off the surface. Breathable, low VOC. 5 gallon covers up to 750-1000 Square Feet in one coat, or up to 500 Square feet in 2 coats. Surface Saver Sealer can be purchased in 5 gallon pails shipped UPS Ground to all 48 U.S. States except Alaska & Hawaii at: www.surfacerestoration.com/shop

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

When our client bought this house, it was stuck in limbo between the traditional interior and a 90's modern structure. The direction we took was a combination of calm beige color scheme with clean lines and smooth surfaces. The continuation of the same materials throughout the house finally bonded all the different spaces into a singular home. The two guest bathrooms were made with Cloe zellige style tiles and custom floating vanities made from white oak. The same oak was used also for the built-in TV wall as floating shelves and base cabinets with a large, tiled center piece for the recessed TV and the electric fireplace. The kitchen also received some of the white oak love in the form of the Island and the recessed cooking area. The biggest issue with the kitchen space was the lack of proportions between the width and its length vs. the extreme height of the vaulted ceiling. The solution I came up with was a secondary line of wall cabinets to be the same depth as the full height units to create a wrap around and make the space more proportionate. Continuing to the master bathroom, here we have a true walk-in master bath suite, no door needed with this size of space. All the walls received porcelain semi slab treatment. (72x36 porcelain tile) a lot of work went into selecting the correct tile pieces to give it the effect of a single slab installation but without the added cost. All fixtures are by Kohler with their fantastic modern gold finish. The result was a perfect flow of calm beige colors and warmth of natural wood throughout.

Surface Saver penetrates up to 1/4 to form a chemical bond deep within the substrate to provide long lasting protection against deterioration or staining due to water absorption. Surface Saver will not impair the natural breathing characteristics of treated substrates, nor will it produce a film or coating. Surface Saver will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. Surface Saver will also help to reduce the formation of efflorescence and the growth of mold and mildew. Uses: Unsealed concrete, broom finished concrete, trowel finished concrete, stamped colored concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry. Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications. Surface Saver maintain the natural, unsealed look and feel of the substrate. Will never peel, flake or fade. UV resistant, non-yellowing. No surface film or coating to maintain. Resistant to freeze-thaw cycles and de-icing salts. Provides excellent resistance to mold, mildew, and fungus. Can be applied to interior & exterior, vertical & horizontal, above & below grade surfaces. Surface Saver Sealer will cause water and other liquids to bead off the surface. Breathable, low VOC. 5 gallon covers up to 750-1000 Square Feet in one coat, or up to 500 Square feet in 2 coats. Surface Saver Sealer can be purchased in 5 gallon pails shipped UPS Ground to all 48 U.S. States except Alaska & Hawaii at: www.surfacerestoration.com/shop