This complete kitchen renovation included removing an adjacent brick fireplace which allowed us to expand the kitchen and create a far more functional design that was desperately needed. The custom blended gray stained maple cabinetry, quartz counter-tops, beveled subway tile back-splash and luxury vinyl tile flooring created the design that our clients had only dreamed about. Notice the different counter-top heights due our clients unique accessibility challenges.

Take your pantry to the height of organization with freedomRail adjustable products from Closets Las Vegas. Shown here in White with a variety of components - including shelves, drawer units, baskets and more.

Study room - mid-sized transitional built-in desk carpeted study room idea in Oklahoma City with beige walls

© Bruce Damonte
Kitchen - contemporary kitchen idea in San Francisco

Casual yet elegant, the Etra Collection by Modern Outdoor offers a modern aesthetic that is constructed for outdoor use while being suitable for indoor settings. Etra’s visual inspiration is derived from its architectural-based frame system. Designed using structural angle steel that is mitered and ground, a clean and seamless surface gives Etra its pure appeal. Frame Options: • 304 stainless steel that is brushed and electropolished • marine-grade 316 stainless steel that is brushed and electropolished for use within one mile of salt air, available for an upcharge • powder coated carbon steel in our standard silver finish • custom powder coat colors, available for an upcharge Surface Options: • sustainably harvested ipe – a beautiful South American hardwood that is three times as dense as teak — naturally resistant to rot, insects, UV exposure, ice, salt, abrasion and splintering – all without the need for toxic chemicals — considered a 25+ year wood • marine-grade polyboard – a UV stabilized high-density polyethylene material that is non-corrosive and chip resistant – available in six colors for expanded design choices Fabric Options: • six standard colors of 100% solution dyed acrylic treated for outdoor use are offered • custom fabrics and COM service are also available Cushion Options: • our standard foam cushions are made from outdoor appropriate high-resiliency (HR) foam • for clients that prefer less maintenance, a flow-through foam that allows water and moisture to escape the cushion is also available for an upcharge Etra is a full-breadth line with dining, bar height, lounge, cafe, patio and pool setting pieces included. The pieces are readily customizable for individual client needs.

The intricately designed trestle column has been coated with our Bar Harbor Blue for that lovely pop of color, and makes the perfect base for the rich wood tone of the circular top on this outstanding Counter Height Dining Table. Stylish, fun, and an ideal choice for your kitchen nook, game room or studio.

This Pro Dunk Gold Basketball system is brought to us by Jason from Tampa, Florida. It stands over a playing area measuring 30' by 20'. This is a Pro Dunk Gold Basketball System that was purchased in January of 2014. It was installed on a 30 ft wide by a 20 ft deep playing area in Tampa, FL. Browse all of Jason M's photos navigate to: http://www.produnkhoops.com/photos/albums/jason-30x20-pro-dunk-gold-basketball-system-907/

Pedrali Arod adjustable height stool.
Inspiration for a modern kitchen remodel in Orange County with solid surface countertops

The Thomas Twin bed is simply stunning in silver. Made from high quality strong metal, this bed will always look good while standing the test of time. Thomas Twin & Full beds come with two adjustable mattress heights. This gives you the option to have your bed set on either a low or a high height. lower height 12" from floor higher height 16" from floor

The intricately designed trestle column has been coated with our Bar Harbor Blue for that lovely pop of color, and makes the perfect base for the rich wood tone of the circular top on this outstanding Counter Height Dining Table. Stylish, fun, and an ideal choice for your kitchen nook, game room or studio.

Features: Color: White Upholstered In Bonded Leather Right Facing Half Chaise Ottoman Included Adjustable Headrests Stainless Steel Legs Available in Other Colors By Special Order (10-14 Weeks) Dimensions: 3 Seater: W72" x D39" x H30" Half Chaise: W43" x D39" x H30" Ottoman: W30" x D43" x H17" Seat Height: 17"

Solar Luminance – Semi-Custom Daylight Light Fixture Model#: DLF-151 Style: Semi-Flush Pendant Finish: Powder Coat Matte Black Shade(s): Clip-On Shades *Note: Price does not include Daylight Tube Product and/or Installation Semi-Custom Product Shipment Lead Time: 6-10 Weeks* The Solar Luminance DLF-152, is an Architectural Element Transitional Semi Flush Pendant, designed to assist the home owner, retail location and/or office location, the ability to benefit from Natural Daylight available with Tubular Skylight systems, while also reflecting your custom interior design and décor theme and needs. Natural Daylight provides incredible mental and physical health and wellness benefits that help the human body and mind maintain a sense of time, absorb natural vitamins, and work with the human eye to perceive color and definition in clarity and contrast to increase visual awareness. Our hope is that your friends, colleagues and guests will be “Inspired & Design” in a way that is both elegant and considerate of the impact we have on the earth and its resources. The DLF-150 is a Semi-Custom Fixture. Full Custom Versions and Options are available for price quote. Please feel free to contact a Solar Luminance Design Assistant for Full Custom Options. Product Specification (List Price based on the following) Over All Dimensions: Over All Height: 22” Shade Dims: 10” H. X 24” Dia. – ¾” Metal Trim with 1” Opening Square Weld Metal Mesh Drop Length: 12” Column Sleeve Diameter: 11 3/4” Dia. Center Wireway: (1) 3/8” Dia. Wireway Hangers: (4) Medium Oval Standard Chain (3 and 4 Hanger Options Available) (Chain available in Various Size Options, pricing may vary) Lamping Specification Daylight Tube System*: 10” Dia. Daylight Tube System – Includes Dome, Flashing, 8’-0” Length of Tube Extension, Tube Manufacturer provided Installation, Product and Installation Warranty 10” Diameter Tube provides the Equivalent of (10) 100Watt White Lamps Secondary Lamping Canopy Lamping: (1) 1.8 Watts (Per Foot) - 48”L. - LED Flex Strip, 5,000K - 12 Volts DC (Lamp Life: 50,000 Hour Rating) Candelabra Lamping: (4) 3.5Watt LED Candelabra Based Screw in Torpedo Warm White Bulbs, 120v 2700K (25Watt Equiv.) (Provided by Solar Luminance) Finish Specification and Materials Metal Finish: Powder Coat Matte Black (Available in other Color Options – Some Color Options may require a price adjustment) Shades: Shown in Off-White Linen Clip-On Shades (Available in other Color Options – Some Color Options may require a price adjustment) Glass Diffuser: Clear Glass (Sandblasted Interior) (Not Tempered) Product Notes Daylight Tubular Product is Supplied and Installed by Tube Product Manufacturer. Tube Product Manufacturer is responsible for all Product, Installation, Warranty, and Service of Tube Related issues. Solar Luminance is not responsible for any errors and/or omissions related the tube related issues that may arise. Solar Luminance will assist in sourcing a local and/or regional Daylight Tubular Product Supplier and Installer, to assist with Roof and Ceiling inspection and Tube supply and Installation. Solar Luminance is not responsible for the Tube Installers quality of work or service. All Secondary Electrical must be performed by a Licensed and/or certified Electrician and/or General Contractor. Solar Luminance is not responsible for the Installation of the fixture. Solar Luminance is not responsible for any errors and/or omissions, damaged and or fault or injury caused by the general contractor. Shipping and Payments Shipping and/or Freight is the responsibility of the purchaser. Solar Luminance will supply a quote based on the fixture size, weight, crating method and delivery location, prior to commencement of fabrication and production. All Finishes and Semi-Custom Modifications must be Signed and Approved via the Solar Luminance Client Approval Drawings, in order for your Custom Daylight Light Fixture to begin Fabrication and Production. Any and all Price adjustments and shipping and/or freight must be paid in full prior to shipment of product. Semi-Custom Product Shipment Lead Time is estimated at 6-10 Weeks, to begin upon receipt of all of the following: • Receipt of full payment • Receipt of signed & approved Client Approval Drawings • Receipt and Confirmation of Approved Finish and Materials • And Verification and Approval of All Price adjustments for Custom Modifications and Shipping and/or Freight Cost Return Policy Product must be inspected upon arrival and receipt of product, at the designated delivery location. Any damage must be reported to Solar Luminance in a written statement of reported damage, by email (Sales@SolarLuminance.com), along with dated and time stamped photo documentation of reported damage. Report of product damage must emailed within 24 hours of receipt of product. Solar Luminance will work with Purchaser and/or Purchasers Agents, to replace and/or fix any damaged and/or missing parts in a timely manner. If damage occurs and/or is reported beyond the 24 hour reporting period Solar Luminance maintains no liability and/or responsibility for the product and/or its condition. Solar Luminance does take pride in our work, craftsmanship, and product, so we do promise to provide exceptional support in remedying any situation that may arise related to your fixture. We do promise to do all that we can to make you happy with your Custom Solar Luminance Daylight Light Fixture. Please feel free to contact us with any Questions or Concerns you may have. Sales@SolarLuminance.com (855) 687-6233 A California based company.

Fran and her family enjoy having their Pro Dunk Platinum Basketball System in the backyard of their residence. They incorporated landscape around their large concrete slab basketball court. Their court is actually NCAA sized half court that is 30 feet wide and 30 feet deep. Her 8 year old son loves the ability to adjust the height so easily. Their residence is located in Hubbardston, Massachusetts. This is a Pro Dunk Platinum Basketball System that was purchased in April of 2013. It was installed on a 30 ft wide by a 30 ft deep playing area in Hubbardston, MA. Browse all of Fran A's photos navigate to: http://www.produnkhoops.com/photos/albums/fran-30x30-pro-dunk-platinum-basketball-system-838/

Traditional Murphy Wall Bed with Hidden Leg, Side Nightstand Bookcase, Hidden Pullout Snack Tray and Home Office Shown in Mahogany on Maple Queen 66"w x 86 5/8”h x 17”d (Dimensions Do Not Include Crown) Hidden Flip Up Leg with 2 Long Black Bar Handles Custom Traditional Nightstand Pier with Hidden Pullout Snack Tray, 3 Raised Panel Drawers on Bottom, Open Above, 3 Adjustable Shelves (37"w x 82”h x 17”d ) LED Task Light for Top of Bed Cabinet 2 Round 1 1/4" Lights, On/Off Switch, Transformer, 1 Extension All Cabinets are Same Depth as Wall Bed All Upper Cabinets are the Same Height – Dimensions Do Not Include Crown 2 Custom Open Bookcases with Small Crown (1.5"), 1 Adjustable Shelf (19.5”w x 30”h x 12”d) Custom Corner Upper Cabinet with Raised Panel Door, 1 Adjustable Shelf (20”w x 30”h x 12”d) Upper Cabinet with Small Crown (1.5"), 1 Adjustable Shelf, 2 Raised Panel Doors (30”w x 30”h x 12”d) Custom File Cabinet with 2 Flat Storage Drawers, 1 File Drawer Raised Panel – 21”w x 31”h x 20”d 3" Crown Molding, Flat Trim, 3" Flat Base, Base Molding

Traditional Murphy Wall Bed with Hidden Leg, Side Nightstand Bookcase, Hidden Pullout Snack Tray and Home Office Shown in Mahogany on Maple Queen 66"w x 86 5/8”h x 17”d (Dimensions Do Not Include Crown) Hidden Flip Up Leg with 2 Long Black Bar Handles Custom Traditional Nightstand Pier with Hidden Pullout Snack Tray, 3 Raised Panel Drawers on Bottom, Open Above, 3 Adjustable Shelves (37"w x 82”h x 17”d ) LED Task Light for Top of Bed Cabinet 2 Round 1 1/4" Lights, On/Off Switch, Transformer, 1 Extension All Cabinets are Same Depth as Wall Bed All Upper Cabinets are the Same Height – Dimensions Do Not Include Crown 2 Custom Open Bookcases with Small Crown (1.5"), 1 Adjustable Shelf (19.5”w x 30”h x 12”d) Custom Corner Upper Cabinet with Raised Panel Door, 1 Adjustable Shelf (20”w x 30”h x 12”d) Upper Cabinet with Small Crown (1.5"), 1 Adjustable Shelf, 2 Raised Panel Doors (30”w x 30”h x 12”d) Custom File Cabinet with 2 Flat Storage Drawers, 1 File Drawer Raised Panel – 21”w x 31”h x 20”d 3" Crown Molding, Flat Trim, 3" Flat Base, Base Molding

This bar stool is an industrial designed piece that is sure to get attention. Its sturdy steel construction and wood seat, give this stool a unique style, perfect for anyone looking to segue from the ordinary. This piece would make a great addition for you bar, kitchen or dining space. Features Single bar stool (1) Engineered of heavy duty industrial steel Finished in shabby black and gray tones Seat is adjustable to counter and bar heights 360°swivel Contemporary style No assembly required, arrives ready to use Dimensions: 17.5"D x 16"W x 34.5"H Seat height: 26.5"-30.5" Footrest height: 13" Product Specifications Manufactured By Great Deal Furniture Sold By Great Deal Furniture Width 16" Depth 17.5" Height 34.5" Great Deal Furniture

The Aras bathroom vanity by Ryvyr is a timelessly elegant design that integrates art deco elements with euro contemporary flair. Available in Black or Grey, this wall-mounted vanity has optional, decorative legs that adjust for two different heights to accommodate integral sink tops or vessel-height sinks. Leg colors can be mix or matched for added expression of individuality. A compartmentalized tray, inside the cabinet, slides out for convenient organization of small items. Vanity tops and legs are sold separately.

Traditional Murphy Wall Bed with Hidden Leg, Side Nightstand Bookcase, Hidden Pullout Snack Tray and Home Office Shown in Mahogany on Maple Queen 66"w x 86 5/8”h x 17”d (Dimensions Do Not Include Crown) Hidden Flip Up Leg with 2 Long Black Bar Handles Custom Traditional Nightstand Pier with Hidden Pullout Snack Tray, 3 Raised Panel Drawers on Bottom, Open Above, 3 Adjustable Shelves (37"w x 82”h x 17”d ) LED Task Light for Top of Bed Cabinet 2 Round 1 1/4" Lights, On/Off Switch, Transformer, 1 Extension All Cabinets are Same Depth as Wall Bed All Upper Cabinets are the Same Height – Dimensions Do Not Include Crown 2 Custom Open Bookcases with Small Crown (1.5"), 1 Adjustable Shelf (19.5”w x 30”h x 12”d) Custom Corner Upper Cabinet with Raised Panel Door, 1 Adjustable Shelf (20”w x 30”h x 12”d) Upper Cabinet with Small Crown (1.5"), 1 Adjustable Shelf, 2 Raised Panel Doors (30”w x 30”h x 12”d) Custom File Cabinet with 2 Flat Storage Drawers, 1 File Drawer Raised Panel – 21”w x 31”h x 20”d 3" Crown Molding, Flat Trim, 3" Flat Base, Base Molding

Solar Luminance – Semi-Custom Daylight Light Fixture Model#: DLF-152 Style: Semi-Flush Pendant Finish: Powder Coat Matte Black Shade(s): (1) Large Fabric Drum Shade with Gold Paper Backing and (4) Laura Beige Linen Clip-On Shades *Note: Price does not include Daylight Tube Product and/or Installation Semi-Custom Product Shipment Lead Time: 6-10 Weeks* The Solar Luminance DLF-152, is an Architectural Element Transitional Semi Flush Pendant, designed to assist the home owner, retail location and/or office location, the ability to benefit from Natural Daylight available with Tubular Skylight systems, while also reflecting your custom interior design and décor theme and needs. Natural Daylight provides incredible mental and physical health and wellness benefits that help the human body and mind maintain a sense of time, absorb natural vitamins, and work with the human eye to perceive color and definition in clarity and contrast to increase visual awareness. Our hope is that your friends, colleagues and guests will be “Inspired & Design” in a way that is both elegant and considerate of the impact we have on the earth and its resources. The DLF-152 is a Semi-Custom Fixture. Full Custom Versions and Options are available for price quote. Please feel free to contact a Solar Luminance Design Assistant for Full Custom Options. Product Specification (List Price based on the following) Over All Dimensions: Over All Height: 25” Shade Dims: 10” H. X 24” Dia. – Large Fabric Drum Shade with Gold Paper Backing Drop Length: 12” Column Sleeve Diameter: 11 3/4” Dia. Center Wireway: (1) 3/8” Dia. Wireway Hangers: (4) Medium Oval Standard Chain (3 and 4 Hanger Options Available) (Chain available in Various Size Options, pricing may vary) Lamping Specification Daylight Tube System*: 10” Dia. Daylight Tube System – Includes Dome, Flashing, 8’-0” Length of Tube Extension, Tube Manufacturer provided Installation, Product and Installation Warranty 10” Diameter Tube provides the Equivalent of (10) 100Watt White Lamps Secondary Lamping Canopy Lamping: (1) 1.8 Watts (Per Foot) - 48”L. - LED Flex Strip, 5,000K - 12 Volts DC (Lamp Life: 50,000 Hour Rating) Candelabra Lamping: (4) 3.5Watt LED Candelabra Based Screw in Torpedo Warm White Bulbs, 120v 2700K (25Watt Equiv.) (Provided by Solar Luminance) Finish Specification and Materials Metal Finish: Powder Coat Matte Black (Available in other Color Options – Some Color Options may require a price adjustment) Shade(s): Shown with (1) Large Fabric Drum Shade with Gold Paper Backing and (4) Laura Beige Linen Clip-On Shades (Available in other Color Options – Some Color Options may require a price adjustment) Glass Diffuser: Clear Glass (Sandblasted Interior) (Not Tempered) Product Notes Daylight Tubular Product is Supplied and Installed by Tube Product Manufacturer. Tube Product Manufacturer is responsible for all Product, Installation, Warranty, and Service of Tube Related issues. Solar Luminance is not responsible for any errors and/or omissions related the tube related issues that may arise. Solar Luminance will assist in sourcing a local and/or regional Daylight Tubular Product Supplier and Installer, to assist with Roof and Ceiling inspection and Tube supply and Installation. Solar Luminance is not responsible for the Tube Installers quality of work or service. All Secondary Electrical must be performed by a Licensed and/or certified Electrician and/or General Contractor. Solar Luminance is not responsible for the Installation of the fixture. Solar Luminance is not responsible for any errors and/or omissions, damaged and or fault or injury caused by the general contractor. Shipping and Payments Shipping and/or Freight is the responsibility of the purchaser. Solar Luminance will supply a quote based on the fixture size, weight, crating method and delivery location, prior to commencement of fabrication and production. All Finishes and Semi-Custom Modifications must be Signed and Approved via the Solar Luminance Client Approval Drawings, in order for your Custom Daylight Light Fixture to begin Fabrication and Production. Any and all Price adjustments and shipping and/or freight must be paid in full prior to shipment of product. Semi-Custom Product Shipment Lead Time is estimated at 6-10 Weeks, to begin upon receipt of all of the following: • Receipt of full payment • Receipt of signed & approved Client Approval Drawings • Receipt and Confirmation of Approved Finish and Materials • And Verification and Approval of All Price adjustments for Custom Modifications and Shipping and/or Freight Cost Return Policy Product must be inspected upon arrival and receipt of product, at the designated delivery location. Any damage must be reported to Solar Luminance in a written statement of reported damage, by email (Sales@SolarLuminance.com), along with dated and time stamped photo documentation of reported damage. Report of product damage must emailed within 24 hours of receipt of product. Solar Luminance will work with Purchaser and/or Purchasers Agents, to replace and/or fix any damaged and/or missing parts in a timely manner. If damage occurs and/or is reported beyond the 24 hour reporting period Solar Luminance maintains no liability and/or responsibility for the product and/or its condition. Solar Luminance does take pride in our work, craftsmanship, and product, so we do promise to provide exceptional support in remedying any situation that may arise related to your fixture. We do promise to do all that we can to make you happy with your Custom Solar Luminance Daylight Light Fixture. Please feel free to contact us with any Questions or Concerns you may have. Sales@SolarLuminance.com (855) 687-6233 A California based company.