This 30" x 24" abstract acrylic painting has been done in shades of cobalt blue, sky blue, citrine, chartreuse, white, soft sea green, and royal blue. Finished in gloss varnish to protect the piece from dust and UV light for years to come. Can be hung vertically or horizontally. Gorgeous vivid rich colors in a great contemporary style.

wa design
Example of a trendy exterior home design in San Francisco

Vintage furnishings. Photo by Jaclyn Campanaro
1950s medium tone wood floor bedroom photo in Portland with white walls

Landscape Designer Brent Knoll of Knoll Landscape Design lotus flower
Photo of a tropical landscaping in Miami.

Wrought iron fencing gives any property a distinguished, traditional look that is very appealing. Used for both decoration and functionality, it is made from iron and other types of metal including steel. Wrought iron or metal fencing is worked in a variety of ways to produce a wide range of specific styles. The bars, rails and caps are combined to form a unique package.

Example of a classic exterior home design in Houston

Beautiful Modern Home Remodel, Siding done by Siding & Windows Group Ltd. We installed HardiePanel Vertical 4x8 Smooth Boards in ColorPlus Technology Color Cobble Stone on the sides of the home and Custom Metal trim.

Photography by John Gibbons This project is designed as a family retreat for a client that has been visiting the southern Colorado area for decades. The cabin consists of two bedrooms and two bathrooms – with guest quarters accessed from exterior deck. Project by Studio H:T principal in charge Brad Tomecek (now with Tomecek Studio Architecture). The project is assembled with the structural and weather tight use of shipping containers. The cabin uses one 40’ container and six 20′ containers. The ends will be structurally reinforced and enclosed with additional site built walls and custom fitted high-performance glazing assemblies.

Location: New York, NY, United States This Loft was tastefully renovated back in the '90s, but was due for an update and an expansion of the kitchen and dining areas to accommodate the client's cooking skills and entertaining needs. EnlargIing the island and adding cabinetry to delineate the office, bar and dining areas was a priority. The bathroom was updated to feel like a tranquil spa with beautiful new tile, plumbing fixtures and cabinets. Our biggest challenge was coordinating the entire renovation while our client was out of town for the Summer! Photographed by: James Salomon

The curvilinear drive is intended to be functional, and artful, while providing uninterrupted access over the ravine, where water levels can rise as much as 8’ in intense rains. Adjacent trees were preserved by minimizing site grading. Photo Credit :Chipper Hatter

Example of a large classic u-shaped dark wood floor eat-in kitchen design in Minneapolis with a double-bowl sink, recessed-panel cabinets, white cabinets, white backsplash, stainless steel appliances, an island and black countertops

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Nicholas Gingold Photography

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Architect: Andre Tchelistcheff Architects New York. NY Builder: Xhema of Greenwich CT Installer: TRM Enterprises Bridgehampton NY Back story. Northern has worked with both Xhema and TRM many tiles. We have worked with Andre before he branched out on his own. Originally Xhema’s contact was to replace the roof and repair the garage, which as some point had been made into an indoor swimming pool without adequate ventilation. The budget was about $8m and there were 20 drawings. By the time the job was 6 months old the scope of work has expanded to over $30m and over 200 drawings had been produced. Northern was contacted to visit the site and evaluate the existing roof. Although the house had been added to over the years the same tile was used but due to the location of the house the color of the tile varied considerably from the front to the back. Northern identified a large number of custom details which would require us to: 1) Match the existing Field tile in size, thickness (it was actually thicker at the butt and reduced to ½” where the tile is overlapped) , surface texture and the color. 2) Make tiles that are curved in their length to suit the curved rafter on the gabled dormers. 3) Make the curved tiles to suit the low slope octagonal tower. 4) Make the curved tiles and Arris style hips to suit the hipped dormers with the curved rafters. 5) Make the segmented tiles to suit the round turret. 6) Make the custom arris style hip tiles for the octagonal tower. 7) Make the custom Arris style hip to suit the different roof pitches as well as the varying splays at the eaves. 8) Make the custom pieces to suit the swept valleys Simon broke down each section of the roof. He indented all items for each section and agreed the measure etc with the installers. This ‘Project Bible’ became an invaluable tool for the installer, our tile makers and us. We shipped some samples from the original roof to Sahtas who replicated tall the details. I was visiting factory and delayed my return to the Saturday so that the tiles coming out of the kiln late Friday night could be wrapped and packed into newly purchase suit cases. I arrived home late Saturday evening and Simon picked me up Sunday afternoon and drove us down to Greenwich for an 8 am meeting with the clients. When we unpacked the tiles they were still warm and Hilfiger signed off on the color, although his wife suggested we make them a bit darker a ‘as he has a dreadful sense of color!’ We took Vincent Liot, owner of TRM to the factory twice so that he could oversee the prototyping of all the myriad custom pieces. This was an invaluable move as he pre-approved all the pieces before they were shipped. The installation was completed and everyone was very pleased with the final outcome. The Hilfiger’s estate manager told me that a group of friends who were staying the weekend after all the work was completed were heard to ask Mr. Hilfiger ‘I thought you were having a new roof’…to which he responded ‘we did but you can’t tell, which as the plan” …perfect! In refection this is probably the most complicated roof Northern has ever had the pleasure to supply. We learned a lot of very valuable lessons but in future when we are asked how did we do it we will answer ‘that is for us to know and for you to pay for!’

Decorative Pool Tiles at Waterline, for historic home built in 1920's in Los Angeles. Pattern: Molino 6" x 6"
Pool - mediterranean pool idea in Los Angeles