Example of an entryway design in Philadelphia

This room encompasses one of the most technical examples of woodwork we’ve seen in a long time. Normally, to create a raised panel wainscot wall, pieces of 1x wood are cut and used to create the boxes, and panel moldings are installed inside the frames to finish off the look. This can be done by typical finish carpenters. The problem is that over time, the numerous joints separate and look bad. In the case of this project, we wanted to avoid that pitfall and do something exquisite AND long-lasting. Over several days, each section of the wall was laid out to determine the appropriate size of each panel. Electrical outlets or switch plates that weren’t centered were moved. Each panel was then specially made at the shop out of 3/4” MDF because its smooth surface is ideal for painting. The raised panels (the pieces that go into each square opening) as well as the panel mouldings (the pieces that frame out each interior panel) were fabricated off site at the shop. Between the set-up, fabrication and the installation, two skilled craftsmen required three solid weeks to make each aspect absolutely perfect. Other finishing details including using a “Back Band” moulding to cap the top of the wainscot and using matching moldings (base, window casings and crown moldings) in areas that needed it for continuity of design. This room’s woodwork is an exquisite example of true craftsmanship. Words and pictures cannot describe the level of skill required for this project. Once everything was completed, it was sprayed with white enamel paint and wallpaper was installed above the wood wainscot to finish off the room. In a nutshell, each wall panel was constructed like a custom made high end cabinet. Literally.

Example of an entryway design in Philadelphia

This room encompasses one of the most technical examples of woodwork we’ve seen in a long time. Normally, to create a raised panel wainscot wall, pieces of 1x wood are cut and used to create the boxes, and panel moldings are installed inside the frames to finish off the look. This can be done by typical finish carpenters. The problem is that over time, the numerous joints separate and look bad. In the case of this project, we wanted to avoid that pitfall and do something exquisite AND long-lasting. Over several days, each section of the wall was laid out to determine the appropriate size of each panel. Electrical outlets or switch plates that weren’t centered were moved. Each panel was then specially made at the shop out of 3/4” MDF because its smooth surface is ideal for painting. The raised panels (the pieces that go into each square opening) as well as the panel mouldings (the pieces that frame out each interior panel) were fabricated off site at the shop. Between the set-up, fabrication and the installation, two skilled craftsmen required three solid weeks to make each aspect absolutely perfect. Other finishing details including using a “Back Band” moulding to cap the top of the wainscot and using matching moldings (base, window casings and crown moldings) in areas that needed it for continuity of design. This room’s woodwork is an exquisite example of true craftsmanship. Words and pictures cannot describe the level of skill required for this project. Once everything was completed, it was sprayed with white enamel paint and wallpaper was installed above the wood wainscot to finish off the room. In a nutshell, each wall panel was constructed like a custom made high end cabinet. Literally.

Example of a transitional galley medium tone wood floor kitchen design in Toronto with white cabinets, soapstone countertops, white backsplash, glass sheet backsplash, paneled appliances and an island

Contemporary Italian Wall Unit VV 3909 Made in Italy Perfect for both modern and contemporary styled interiors, this modular wall unit line offers lots of customization options so everyone could adjust the composition according to the individual's size and color requirements, creating an entertainment center of the dream. The wall unit line features lots of different units, that are available in several sizes and can wall mounted both vertically and horizontally. All the units from this entertainment center furniture collection are available in walnut, white ash, ivory ash and mink ash wood structure finishes as well as white and mud high gloss lacquers. The structure and the front doors of the same unit can be ordered in different finishes/lacquers to add unique and elegant contrast look to the wall unit design. Features: E1-Class ecological panels, which are produced exclusively through a wood recycling production process The structure and the front in wood finishes are made of chipboard The lacquered structures and fronts are made of REAL POLISH SCRATCH PROOF LACQUERING, which is non toxic and non allergic products All the panels are 0.7" thick Drawers mounted on metal runners with MDF bottom panel, height adjustable and soft-close system Metal snap-on hinges with adjustable height The starting price is for the VV Wall Unit Composition 3909 as shown in the main picture in White Ash / Walnut finishes. (Consists of: Base Drawer Cabinet W47.2" x H10.2", Base Drawer Cabinet W59" x H10.2", Three Horizontal Hanging Units W47.2" each). Dimensions: Wall Unit: W106.3" x D18.3" x H79" Individual Components: Base Drawer Cabinet H10.2": W47.2" x D18.3" x H10.2" Base Drawer Cabinet H10.2": W59" x D18.3" x H10.2" Horizontal Hanging Unit: W59" x D13.8" x H13.4"

Pepper Watkins
Nursery - mid-sized scandinavian gender-neutral light wood floor and beige floor nursery idea in DC Metro with blue walls

Minimalist bedroom photo in Denver

Modern Italian Wall Unit VV 3902 Made in Italy Perfect for both modern and contemporary styled interiors, this modular wall unit line offers lots of customization options so everyone could adjust the composition according to the individual's size and color requirements, creating an entertainment center of the dream. The wall unit line features lots of different units, that are available in several sizes and can wall mounted both vertically and horizontally. All the units from this entertainment center furniture collection are available in walnut, white ash, ivory ash and mink ash wood structure finishes as well as white and mud high gloss lacquers. The structure and the front doors of the same unit can be ordered in different finishes/lacquers to add unique and elegant contrast look to the wall unit design. Features: E1-Class ecological panels, which are produced exclusively through a wood recycling production process The structure and the front in wood finishes are made of chipboard The lacquered structures and fronts are made of REAL POLISH SCRATCH PROOF LACQUERING, which is non toxic and non allergic products All the panels are 0.7" thick Drawers mounted on metal runners with MDF bottom panel, height adjustable and soft-close system Metal snap-on hinges with adjustable height The starting price is for the VV Wall Unit Composition 3902 as shown in the main picture in Ivory Ash / Walnut finishes. (Consists of: Two Base Drawer Cabinets W59" x H10.2" each, Horizontal Hanging Unit W35.4", Horizontal Hanging Unit W47.2", Two Vertical Hanging Bookcases H47.2" each). Dimensions: Wall Unit: W118" x D18.3" x H79" Individual Components: Base Drawer Cabinet H10": W59" x D18.3" x H10.2" Horizontal Hanging Unit: W35.4" x D13.8" x H13.4" Horizontal Hanging Unit: W47.2" x D13.8" x H13.4" Vertical Hanging Bookcase: W13.4" x D13" x H47.2"

Built by: Ruben Alamillo ruby2sday52@gmail.com 951.941.8304 This bar features a wine refrigerator at each end and doors applied to match the cabinet doors. Materials used for this project are a 36”x 12’ Parota live edge slab for the countertop, paint grade plywood for the cabinets, and 1/2” x 2” x 12” wood planks that were painted & textured for the wall background. The shelves and decor provided by the designer.

Magnificent kitchen, featuring North American Cabinetry's Almyer door in white for the perimeter and walnut for the island. Details include walk in pantry, stacked cabinets with glass, appliance panels and furniture legs on the island. This kitchen has it all- beauty, functionality and so much storage!

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.

Mark Pinkerton - vi360
Eat-in kitchen - large traditional l-shaped dark wood floor and brown floor eat-in kitchen idea in San Francisco with an undermount sink, beaded inset cabinets, white cabinets, quartzite countertops, white backsplash, ceramic backsplash, stainless steel appliances and an island

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.

The Hartfield Kitchen Design features our Highland door-style, with a small difference to add that seamless similarity. The main kitchen has Highland with a flat panel in MDF with Cloud White, whereas the island has Highland with a raised panel in Maple with our Dark Mocha stain. The customer chose to have maple print interiors with maple print melamine drawers on full-extensions soft-close slides. The hood was custom-made to the customer's specifications.