I was asked to look at renovating a shower cubicle at a property in in Manchester city centre that had been clad in White Limestone tiles. I understood the bathroom had been installed 12 years prior, but now the tiles were looking grubby, mouldy and dirty. The client had lived at the property for the last two years and in an attempt to resolve the problems had used a few different household products such as flash and bleach, they had tried everything, and nothing had helped. I suspected that these strong acidic cleaners had actually made the problem worse by stripping off what was left of the sealer that was protecting the Limestone, allowing dirt to become ingrained in the stone. I visited the property and ran a few cleaning tests in the shower cubicle with Tile Doctor products. This allows me to see which product will have the best results and gives the customer confidence that we can resolve their issues. The results were immediate, they could see the difference and they were happy to accept my quote and agree a date for my return to complete the work. I arrived several weeks later and made a start. The tiles were scrubbed by hand with a strong dilution of Tile Doctor Remove and Go with excellent results. This product is designed to remove coatings and sealers, and in this case, it did a great job of drawing out the ingrained stains and dirt build-up. This removed what was left of the sealer and took off most of the dirt and mould. The Limestone tiles and grout were then rinsed with water to remove the soil. Next I needed to restore the smooth surface of the limestone which had been etched by the use of strong acidic cleaning products. To do this I used a set of six-inch diamond burnishing pads attached to a hand buffer to hone and restore the stone. I then dried the shower tiles and grout with a heat gun checking the moisture levels with damp meter until I was satisfied it was completely dry. The last step was to re-seal the Limestone and Grout using a couple of coats of Tile Doctor Colour Grow. This is natural coloured intensifying sealer which provides durable protection to the surface allowing it to breathe and enhancing the colours. The Customer was amazed with the difference and left the following feedback! “Kamila was friendly, professional and kept me informed about what to expect before she took on the job and during the tile cleaning. The tiles look absolutely amazing after her work – I feel as though I have a brand new bathroom! Kamila also gave me helpful tips on looking after limestone tiles. I can’t recommend her highly enough.” For future cleaning I recommended the use of Tile Doctor Aqua-Pro which is a pH neutral shower tile cleaner designed for use on sealed surfaces. Most cleaning products you find in supermarkets are overly strong and will erode the sealer prematurely, so when choosing a cleaning product always read the label and make sure it’s safe to use on Sealed Stone tiles. Alex Logonzy Greater Manchester Tile Doctor

Painter Near Me Chicago - Professional Painting Services by Windy City Painters Finding a skilled painter near me in Chicago is easier when you know what to look for, and Windy City Painters delivers the craftsmanship Chicago homeowners trust for greystones, vintage two-flats, classic bungalows, and modern condos throughout the city. Project Overview This project showcases Windy City Painters completing professional interior and exterior painting services for a Chicago-area client. The building's vintage character called for careful color selection and precise application to honor original architectural details while refreshing every surface. Materials and Products Used Windy City Painters selects premium paints from trusted manufacturers including Sherwin-Williams and Benjamin Moore, chosen specifically for Chicago's climate demands. Primers, fillers, and caulks are all professional-grade for lasting adhesion and durability. Our Step-by-Step Process Step 1 - Prep and Repairs: All surfaces are cleaned, sanded, and patched. Cracks in plaster or drywall are filled and feathered smooth before any painting begins. Step 2 - Priming: A quality primer is applied to ensure proper adhesion, uniform sheen, and long-term durability across all surfaces. Step 3 - Paint Application: Multiple coats are applied using the right tools for each surface - brushes, rollers, and sprayers where appropriate. Step 4 - Final Inspection: Windy City Painters conducts a detailed walkthrough with the homeowner to confirm every detail meets our high standard. Chicago-Specific Challenges Older Chicago homes present unique challenges including lead paint layers, aging horsehair plaster, moisture from harsh winters, and intricate vintage millwork. Windy City Painters is trained to handle all of these safely and professionally. Results Clients consistently report dramatic improvements in curb appeal, interior atmosphere, and overall home value after working with Windy City Painters. Pro Tips Before You Start Always test for lead paint in homes built before 1978. Budget for surface prep - it determines final quality. Choose paints rated for Chicago's freeze-thaw cycles for exterior projects. See more work and request a free estimate at windypainters.com. Frequently Asked Questions Q: How do I find a reliable painter near me in Chicago? / A: Look for licensed, insured contractors with strong local reviews. Windy City Painters is a trusted painter near me in Chicago with a proven track record serving greystones, bungalows, and vintage buildings throughout the city. Q: What surfaces can a painter near me in Chicago handle? / A: Windy City Painters handles drywall, plaster, wood trim, cabinets, brick, and metal surfaces, making us a comprehensive painter near me in Chicago for any project large or small. Q: How important is surface preparation? / A: Proper preparation is the foundation of any quality paint job. As your painter near me in Chicago, Windy City Painters dedicates significant time to prep work ensuring flawless, long-lasting results every time. Q: Do you handle lead paint safely in older Chicago homes? / A: Yes, Windy City Painters follows all safety protocols for lead paint in older homes, making us the responsible painter near me in Chicago for vintage and pre-1978 buildings. Q: What paint brands does Windy City Painters recommend? / A: As a professional painter near me in Chicago, Windy City Painters recommends Sherwin-Williams and Benjamin Moore for their durability, color accuracy, and performance in Chicago's demanding climate. Q: Can you paint exterior surfaces in Chicago winters? / A: Exterior painting requires temperatures above 50 degrees Fahrenheit. Windy City Painters, your painter near me in Chicago, schedules exterior projects during appropriate seasonal windows for best results. Q: How many coats of paint are typically needed? / A: Most projects require two finish coats over primer. Your painter near me in Chicago at Windy City Painters assesses each surface individually to determine the right number of coats. Q: Do you offer color consultation services? / A: Yes, Windy City Painters provides color guidance as part of our painter near me in Chicago service, helping you select shades that complement your home's architecture and style. Q: Can Windy City Painters match existing paint colors? / A: Absolutely, as your skilled painter near me in Chicago, Windy City Painters uses professional color-matching technology to seamlessly blend new paint with existing finishes throughout your home. Q: How do I get a free estimate from a painter near me in Chicago? / A: Simply visit windypainters.com or call us directly. Windy City Painters makes it easy to connect with a professional painter near me in Chicago for a no-obligation estimate.

#TipTuesday: Because there are all kinds of items stored in the garage, we recommend organizing in zones and grouping like items together. Think of these zones like departments in a store, such as the garden area, tools section, and so on. That way you know where each item lives. Consult with one of our designers for more helpful tips and schedule a FREE design consultation today. Phoenix | Tucson | Prescott | Flagstaff | Cottonwood https://linktr.ee/ICAZ

Globe Electric's 2W (40W equivalent) Vintage Candelabra LED Light Bulb is a perfect way to add style and pizzazz to your home. The exposed tungsten filament is used to reproduce the single hairpin loop of a vintage Edison design and is ideal for architectural restoration projects, conceptual space or to bring a vintage touch to any room. Since the squirrel cage filament emits a soft warm glow and is dimmable, these bulbs work great as an accent or mood light. Pair it with a clear shade or exposed socket fixture to enjoy its ambient amber glow. This Edison inspired bulb is a Steampunk favorite creating a beautiful work of art out of any fixture and giving your room a vintage film noir aesthetic. Recommended for exposed socket or clear shade fixtures. The candelabra E12 base and CA11 Flame Tip shape works with most standard chandelier fixtures and nightlights in your home.

This beautiful Limestone kitchen tiled floor at a property in Peel Green was only a year old and, while it wasn’t in too bad of a state, the customer told me the floor had not been sealed properly due to issues with retaining moisture. The lack of an adequate sealer had allowed the Limestone to become duller over time after exposure to dirt and muck. It also had some more obvious marks and stains in some place and needed some grouting to be done around the corners and edges of the room. I travelled to the property in Peel Green, which is within the Greater City of Salford in Greater Manchester, to see what could be done to restore the condition of the tiles. Upon closer inspection of the tiles, I recommended to the customer that we proceed with the process known as burnishing, which we use primarily on Limestone, Marble, and Travertine. Burnishing, which involves the application of diamond encrusted burnishing pads, breaks down old sealers, gets rid of marks, stains and ingrained dirt, and gradually builds and evens out the polish on the tiles. I started burnishing the Limestone kitchen tiles straight away when I arrived at the property as it was a big area and would require lots of hard work to achieve the desired results within the space of a day. Our burnishing system consists of four diamond encrusted pads: Coarse, Medium, a Fine and Very Fine. Each pad was applied to the Limestone in sequence in tandem with a small amount of water to act as lubrication, gradually smoothing and polishing the surface of the tiles. After every pad, I also used my wet vac machine to remove any dirty water left on the floor and, after the Fine pad I rinsed the floor thoroughly to remove any dirt left on floor. I then left it to dry. When I was satisfied that the floor was completely dry, it was time to seal the Limestone tiles. However, I first went over the floor with Very Fine grit pad to provide a final polish before sealing. My choice of sealer was the impregnating Tile Doctor Colour Grow, a product which enhances the natural colours in the stone whilst also offering robust protection against dirt and stains. Remembering that the tiles had never been properly sealed, I applied plenty of sealer and left it to dry for 10 minutes. Following this, I carefully removed any excess sealer left on the surface with a dry cotton cloth. After sealing I went over the floor once final time with the Very Fine pad, just to smoothen things down and leave an exceptionally neat finish. When the job was finished, I gave the owner some tips and recommendations on the cleaning of the floor going forward and a complimentary bottle of neutral cleaner to get them started. The customer was very pleased with the finish, so much so that she opted and take up the Tile Doctor Maintenance Plan to keep the floor looking good for years to come! This involves popping round every 6-12 months to top up the sealer and give the floor a quick polish. Tony Olmet Greater Manchester Tile Doctor

Creating a comfortable outdoor living space is a priority for many homeowners and DIY enthusiasts. With rising summer temperatures, installing a shade tarp in your backyard offers an affordable and effective solution for sun protection. We’ve developed this detailed, step-by-step guide to help you confidently install a shade tarp that not only shields you from the sun but also adds aesthetic appeal to your outdoor area. Benefits of Installing a Backyard Shade Tarp Before diving into the installation process, let’s explore the key benefits of having a backyard shade tarp: Provides UV Protection: Keeps your family and guests safe from harmful sun exposure. Reduces Outdoor Temperatures: Creates a cooler, more enjoyable outdoor space. Protects Outdoor Furniture: Extends the life of patio furniture by reducing sun damage. Enhances Outdoor Aesthetics: Adds a modern, stylish look to your yard. Budget-Friendly: More affordable compared to permanent structures like pergolas. Materials and Tools You’ll Need To begin your DIY backyard shade project, gather the following materials and tools: Materials: Shade tarp (UV-resistant and breathable) Sturdy posts or existing structures (trees, fences, walls) Mounting hardware (eye bolts, D-rings, turnbuckles, snap hooks) Nylon or polyester rope, or stainless-steel wire Concrete (if installing new posts) Tools: Power drill Measuring tape Level Ladder Wrench or adjustable spanner Post hole digger (if installing new posts) Step 1: Plan Your Shade Tarp Layout The first step in installing your backyard shade tarp is careful planning. Take time to assess your outdoor area and answer these key questions: Where is the sun’s path throughout the day? What size and shape of tarp best suits your space? Will you anchor the tarp to existing structures or install new posts? What height do you want the tarp to sit at for maximum shade and airflow? Pro Tip: Use string or garden hoses to visualize the tarp layout on the ground before making permanent decisions. Step 2: Measure and Mark Anchor Points Once you’ve determined the tarp’s location and orientation: Measure the tarp dimensions. Mark the exact points where each corner of the tarp will be anchored. Ensure that the anchor points are at least 5–10% longer than the tarp size to allow for tensioning and slight adjustments. Consider slope angles for water runoff. Aim for at least a 20-degree angle to prevent water pooling on the tarp. Step 3: Install Support Posts (If Necessary) If your backyard lacks existing anchor points like trees or fences, you’ll need to install sturdy support posts: Dig post holes at least 24 inches deep and 8-12 inches wide for stability. Set posts in concrete, making sure they remain plumb and level. Allow the concrete to cure for at least 24–48 hours before applying tension from the tarp. We recommend using pressure-treated wood, galvanized steel poles, or aluminum posts for longevity and strength. Step 4: Install Mounting Hardware With your anchor points ready, it’s time to install the necessary hardware: Attach eye bolts or pad eyes securely into walls, posts, or other fixed structures. For added flexibility and adjustability, install turnbuckles or tensioners to fine-tune the tarp’s tightness. Connect snap hooks, D-rings, or carabiners to make assembly and disassembly easier. Make sure all hardware is rated for outdoor use to prevent rust and corrosion. Step 5: Attach and Tension the Shade Tarp Now it’s time for the most satisfying part—mounting the shade tarp: Begin by attaching one corner of the tarp to an anchor point. Gradually attach the remaining corners, moving diagonally for even tension. Adjust each connection point using your turnbuckles, ropes, or cables. Pull the tarp tight enough to avoid sagging, but not so tight that it risks tearing. Check that the tarp maintains the desired slope for rainwater runoff and adjust tension as needed. Step 6: Final Adjustments and Safety Check Before enjoying your new shaded area: Inspect all anchor points and hardware for stability. Test the tarp’s tension and make adjustments for even distribution. Ensure that no sharp edges or loose connections remain that could damage the tarp or pose a safety hazard. Confirm that the tarp is secure in windy conditions by giving it a gentle tug. If you live in an area with frequent high winds, consider removing the tarp during storms to prevent damage. Step 7: Enjoy Your Shaded Backyard Oasis Once installed, your backyard shade tarp provides a comfortable and protective space for outdoor gatherings, relaxation, or family activities. You can decorate underneath with outdoor furniture, string lights, or potted plants to create a personalized outdoor retreat. Maintenance Tips for Long-Lasting Shade Tarp Performance To extend the life of your shade tarp, follow these maintenance guidelines: Regularly check for wear and tear, especially around anchor points and seams. Clean the tarp periodically with mild soap and water to prevent mildew buildup. Store the tarp indoors during harsh weather seasons if it's not designed for year-round use. Tighten hardware as needed to maintain proper tension and avoid sagging. By following these simple care steps, your shade tarp will continue to deliver years of sun protection and outdoor comfort. Conclusion: Upgrade Your Outdoor Space with a DIY Shade Tarp Installing a shade tarp in your backyard is a cost-effective and rewarding DIY project. With careful planning, quality materials, and proper installation techniques, you’ll enjoy cool, shaded outdoor living all season long. This step-by-step guide ensures your project goes smoothly from start to finish.

The perfect chicken coop with deep litter system. This coop you only clean out once a year. 4'x6' hen house with 6'x18' run.
Inspiration for a craftsman gable roof remodel in New York

Inspiration for a timeless kitchen remodel in Other

In the summer of 2012 we embarked on a remodel of our 1912 Craftsman. We wanted to redo the kitchen and the upper floor which contained the master bedroom, bathroom, guest room and office. We interviewed approximately 5 other architects prior to finding Mark. We knew right away he was the right person for the job. He was patient, thorough and we could tell he truly loved our home and wanted to work with us to make it even better. His vast experience showed through during the interview process which validated his portfolio. Mark truly became a trusted advisor who would guide us through this remodel process from beginning to end. His planning was precise and he came by many times to re-measure to get every detail accounted for. He was patient and helpful as we made decisions and then changed our minds! He was with us every week of the 10 weeks of the remodel. He attended each weekly meeting with the General Contractor and was at the house numerous other times guiding and really looking out for our best interests. I came to trust him enough to ask his opinion on almost everything from layout to colors and decorating tips! He consistently threw out ideas....many of which we took. Additionally Mark was a tremendous help in referring us to contractors, designers, and retailers to help us along the way. I am ecstatic over the results of the remodel. The kitchen and bath are truly beautiful and full of modern conveniences while maintaining the integrity of the 1912 structure. We were right about our decision to hire Mark and we wholehearted recommend him as an outstanding architect, and more!!

Tessa Neustadt
Inspiration for a contemporary living room remodel in New York

Example of an eclectic kids' room design in San Diego

Example of a 1960s kitchen design in Milwaukee

This Guest Bedroom was awarded First Place in the ASID LEGACY OF DESIGN TEXAS 2015 AWARD for Traditional Guest Bedroom. Interior Design & Styling by Dona Rosene Interiors. Photography by Michael Hunter.

Inspiration for a mediterranean bathroom remodel in Los Angeles

Inspiration for a transitional bathroom remodel in San Francisco

Example of a classic dining room design in New York

Inspiration for a landscaping in Charleston.

Example of a classic kitchen design in Seattle