Search results for "Sealed" in Home Design Ideas

The least exciting work we do is what prevents the expensive calls. Finished in Houston.
Client: Justin
Location: Houston
Scope of Work: Exterior sealing, gable louvers and exhaust vent replacement
Nobody takes photos of caulk. But the gaps between siding and brick, around a garage door, around a window, are where water gets into a wall quietly and stays. By the time it shows up inside, it is a framing problem.
Justin had us go around the whole exterior. We inspected the full perimeter for gaps, cracks and open joints, pulled the sealant that had cracked or let go, cleaned and prepped the surfaces, then applied new exterior-grade sealant at every joint. Same around the garage door and the accessible windows.
Both front gable wood louvers came out and were replaced with new ones of comparable size and design, framing checked while the openings were open. New louvers sealed, weatherproofed, primed and painted to match.
Then five exterior exhaust vents on the brick and siding walls, replaced, secured and sealed at the vent-to-wall transition. That transition is a classic entry point almost nobody looks at.
Debris removed, work areas cleaned, final walk of all repairs.
One honest note: sealant seals joints. It is not a fix for a flashing or drainage problem underneath. If we find one, we tell you instead of caulking over it.
Justin, thank you for doing the unglamorous work.
Achilles Roofing & Exterior, a Houston roofing company serving Sugar Land and greater Houston.

Recently I travelled down to the village of Prestwood in the Chiltern Hills of southern Buckinghamshire, to work on a Victorian tiled porch and hallway. Victorian tiles are commonly found in the entrance areas of older houses and unfortunately in this case the tiles had become heavily ingrained with dirt over time, and had suffered from additional paint and plaster spillages. The result was an unsightly mess; my client was considering covering the floor with lino after several unsuccessful attempts at cleaning it. I was called upon to provide a professional clean and seal, restoring these great Victorian tiles back to looking their best again.
On my first day at the house, I mixed up a solution of 50 per cent Tile Doctor Pro-Clean, a high alkaline cleaner, and NanoTech HBU (formerly known as Ultra Clean), which is a cleaning product that contains nano-sized abrasive particles that penetrate deep into the stone to lift ingrained dirt to the surface. This solution was worked into the tiles using abrasive scrubbing pads fitted to one of my commercial rotary machines.
The cleaning process left over a slurry of residue which I rinsed away with clean water and extracted with a wet vacuum. I was still left with the issue of stubborn paint spillages, so I applied a layer of Tile Doctor Remove & Go, a stripper with cleaning properties which is very effective at breaking down paint and adhesive stains.
Once the paint spillages had been dealt with I gave the area another rinse with clean water. I then left the house, allowing the floor enough time to dry overnight.
Upon my return the day I set about sealing the newly cleaned Victorian tiles. Before starting the sealing process I inspected the floor to check for any dampness, knowing that any excess moisture could potentially damage the performance of the sealer.
When I was satisfied that the tiles were fully dried, I applied Tile Doctor Seal & Go, a sealer which offers durable surface protection, along with an aesthetically pleasing, low-sheen finish which brings out the colour in the stone. This product can be used to seal internal, porous surfaces including Victorian, Slate, textured Quarry and Sandstone tiles.
The process made an amazing difference to the floor as you can see from the photographs; additionally the restoration of such an original feature adds a lot of value and looks so much better than lino!
Colin Ford
South Buckinghamshire Tile Doctor

Wide interior view of the finished job. The existing Wayne Dalton door was kept — the panels, tracks, hardware and opener were all still serviceable, so only the failed bottom seal and retainer assembly were replaced. The homeowner had been quoted a full door replacement by another company. The new seal makes continuous contact across the full width of the bottom edge, and the price quoted by phone was the final price.
Find the right local pro for your project

As part of our service we advise customers on best practice for maintaining the appearance of the floor and I’m happy to report this client in Ampthill who has a Terracotta tiled floor that we had fully restored a few years ago had followed to the letter.
Having two dogs and two children, the floor gets a lot of traffic and as expected over a period of time the sealer does wear thin in the busier areas. Should the sealer become too damaged dirt can get underneath and gradually the seal will deteriorate to the point where restoration will be needed again.
By keeping on top of the maintenance our client has kept a beautiful terracotta floor in great condition however as the sealer was wearing he called us back to do a maintenance clean and top up the sealer an activity which we are able to complete in one day rather than the several days needed to do a full restoration.
To maintain the floor, I applied a Tile Doctor fine diamond burnishing pad fitted to a rotary machine and with a little water sprayed onto the tiles to lubricate the process the top was burnished, this took the dirt off the top of the tiles and left a clean surface to top up the seal. The floor was then rinsed to remove the soil generated by the process.
Having removed any damaged sealer an industrial air mover was switched on to get the floor as dry as possible, we then tested the damp levels at various intervals until the floor was dry for re-sealing.
To re-seal two coats of Tile Doctor Seal and Go we applied to the floor allowing the first coat to dry before applying the second. Once the second coat had dried a white polishing pad was used to buff the tiles.
Andrew Evans
Bedfordshire Tile Doctor

Bluestone Patio AFTER Sealing With Surface Saver Sealer.
Backyard stone patio photo in Detroit
Backyard stone patio photo in Detroit

Brick paver walkway after cleaning, re-filling sand & sealing with Paver Gloss Sealer.
Design ideas for a mid-sized front yard brick landscaping in Detroit.
Design ideas for a mid-sized front yard brick landscaping in Detroit.

All Surface Restoration specializes in pressure washing, stripping, installation of polymeric sand & sealing of brick pavers. To request a free estimate visit: http://surfacerestoration.com/services/brick-paver-restoration or call 248-475-0004.

Sponsored
Delaware, OH
Buckeye Basements, Inc.
Central Ohio's Basement Finishing ExpertsBest Of Houzz '13-'21

Stunning custom Cape Cod style home located in Seal Beach, Ca
Example of a large beach style kitchen design in Orange County
Example of a large beach style kitchen design in Orange County

All Surface Restoration specializes in brick paver cleaning, washing, stripping, polymeric sand installation & sealing. To request a free estimate visit: http://surfacerestoration.com/services/brick-paver-restoration
or call 248-475-0004

MacDonald Hardwoods, in Denver, Colorado is a retailer for Hallmark Floors. This is the Moderno Collection: Seal Cove
Large trendy open concept medium tone wood floor living room photo in Denver with gray walls, no fireplace and no tv
Large trendy open concept medium tone wood floor living room photo in Denver with gray walls, no fireplace and no tv

I was recently contacted by a client who lives in the small coastal town of Bridlington, East Yorkshire. Bridlington has a small sea fishing port known for its great shellfish.
My client had a Limestone floor that was really in need of a fresh up: over the years the tiles had become dull and worn-looking, and she was keen to restore a nice shine to the surface. I was on hand to treat the floor to a much needed clean, polish and seal.
My first job was to strip off the old sealer. I did this using a coarse diamond burnishing pad fitted to a rotary machine. The floor was then given a thorough rinse with clean water to clear off any dirt and excess sealer. Following this, the excess water was quickly soaked up with a wet-dry vac machine to make sure there was no leftover moisture, as this could have potentially affected the performance of the new sealer (which I would apply at a later stage).
To polish the floor I continued with the system of burnishing pads, starting first with a medium burnishing pad, followed by the fine and very fine pads to achieve the desired effect. The result was a very nice overall sheen.
After cleaning and polishing, the only task remaining was to provide the floor with a durable seal. I did this using Tile Doctor Ultra Seal, which is a premium, natural-look penetrating sealer that is specially designed to provide maximum stain protection from within. This particular product is suitable for use on a range of different natural stone floors, including Limestone, Slate, Granite, Marble and Travertine.
Overall, my client was very happy with the results. As you can see from the photographs, the clean, polish and seal made a marked difference on the condition of the floor, turning the tiles from dull and lifeless to full of character and colour once again.

AFTER: Cleaning Brick Paver Driveway, Installing Tan Polymeric Sand & Sealing With High Gloss Paver Sealer.
Photo of a brick landscaping in Detroit.
Photo of a brick landscaping in Detroit.

Although space was tight in this bedroom we made the most of it using this Murphy bed. These beds are also very attractive pieces of furniture when closed up and not in use.

Skips Custom Flooring, in New York is a retailer for Hallmark Floors. This is the Moderno Collection: Seal Cove
Example of a mid-sized open concept medium tone wood floor living room design in New York with white walls, no fireplace and a wall-mounted tv
Example of a mid-sized open concept medium tone wood floor living room design in New York with white walls, no fireplace and a wall-mounted tv

All Surface Restoration specializes in brick paver maintenance, restoration & preservation. We offer complete brick paver cleaning, stripping, sealing services. Request a free estimate at: http://surfacerestoration.com/services/brick-paver-restoration/ or call 248-475-0004

All Surface Restoration specializes in brick paver maintenance, restoration & preservation. We offer complete brick paver cleaning, stripping, sealing services. Request a free estimate at: http://surfacerestoration.com/services/brick-paver-restoration/ or call 248-475-0004

Exposed Aggregate Concrete Driveway Sealed With 1 Coat Of Paver Gloss Sealer.
Inspiration for a large front yard driveway in Detroit.
Inspiration for a large front yard driveway in Detroit.

This fantastic Victorian tiled hallway floor in Oxford was in good physical condition for its age; however like any sealed floor the sealer had worn down with use and with dirt becoming trapped in the pores of the tile it was now becoming difficult to clean effectively and had become dull and un-inviting. It was now due a really good deep clean and re-seal. Oxford as I’m sure your aware has a rich history and is home to one of the world’s best universities, so not surprisingly many houses here have interesting floors such as this one.
Upon my arrival at the house, my first task was to protect the skirting boards, as well as the wooden floors leading into the other rooms. I then mixed a solution of Tile Doctor Pro-Clean, a versatile, high alkaline cleaner combined 50:50 with Tile Doctor NanoTech HBU, a particularly strong cleaner that utilises nano-sized particles to penetrate into areas of the stone that standard products simply cannot reach.
I applied the solution to the surface and allowed it to soak for thirty minutes, allowing it to get to work on the ingrained dirt so it could be easily removed. Following this, I agitated the solution with a soft brush attached to a rotary scrubbing machine. I then applied more solution and left it for a further thirty minutes, before scrubbing this into the tiles using a black pad fitted to the rotary machine.
After the clean had been completed, I rinsed the entire floor multiple times and vacuumed up the resulting slurry using a wet-vac machine.
I left the floor overnight, allowing the surface enough time to dry and returned then next day to seal the floor, checking first to ensure the tiles had dried. To seal the floor I used several coatings of Tile Doctor Seal & Go. Seal & Go which is a water-based, topical sealer that is suitable for use on unsealed, porous surfaces such as Victorian tile, textured Quarry, Slate, and Sandstone; being water based you don’t get the smell so it’s much more pleasant to work with.
As you can see from the before and after photos, the result was an aesthetically pleasing and – most importantly – clean, Victorian tiled floor. Needless to say, my client was extremely pleased with my work.
Barry Woodward
Oxfordshire Tile Doctor
17

