That's great. Thanks much for that. We're also using induction. Do you by any chance have a link to the backsplash - color and model - that you used? Which ikea handles did you use? We're going for this exact look. It's fantastic.

Hi otto77

Here's a link to the available cover panels at IKEA.
http://www.ikea.com/ca/en/catalog/products/10200881/#/40069988 or search the following on their website:

PERFEKT ABSTRAKT
Cover panel for high cabinet, high gloss white/gray/cream

Product dimensions
Width: 24 5/8 "
Height: 79 1/2 " (80" and 88")
Thickness: 1/2 "

For Kitchen pulls use either the "Klippig" (as shown) or "Grip" Handles. (Note we specified 'push-2-open' hardware on the upper row cabinets)

All the best...(Please send us images of your project when complete!)

~ thirdstone inc. [^]

Can these panels be cut?

Pattimay - Yes, they can be cut...see graphic above illustrating where to cut ~thirdstone inc [^]

Thank you thridstone, only where the line is? Say 12"? What if you want it 4" or 6" - unable to?

Sorry to resurrect this thread years later but I see you mentioned induction cook tops and gas ranges - any thoughts on using these panels for a regular glass top electric range? It's a free-standing model with a control panel along the back so I don't think there would be a ton of heat coming off the back but curious to hear you thoughts. Thanks! It's beautiful!

Hi Erin - As mentioned previously, it is not recommended using the panels next to a cooking appliance in general. It's ultimately up to your local code regulations and whether you as the user want to use the panels for this purpose.