Software
Houzz Logo Print
paul3636

Shimpaku Juniper tips turning brown

21 years ago

Can anyone tell me why the tips are turning brown on an otherwise healthy looking semi-cascade juiper?

I have had this plant for 3 years.

Is this a natural occurance?

Should the tipe be cut or pinched?

Any other advise welcome

Paul

Comments (13)

  • 21 years ago

    Sounds like a deiase, spray a few times with a fungicide.

  • 21 years ago

    It could be fungal...I would spray for that and mites.
    Also try and level the branch out by tipping the pot over and craddling it with something like a sandbag. This will make it easy for the tree to get nurishment to the lower branches. Pinch out the brown tips so you can see if it continues. Good Luck!

    Tim

  • 21 years ago

    "Also try and level the branch out by tipping the pot over and craddling it with something like a sandbag. This will make it easy for the tree to get nurishment to the lower branches."

    What are you talking about Tim.

  • 21 years ago

    Often brown tips on junipers is simply caused by pinching. We have always been taught to pinch out new growth, first with fingernails, then more recently using our fingertips. Both of these methods will leave little brown tips and should be avoided. Junipers should be thinned and pruned with scissors, not fingers. I do not at this time have an article on junipers on my website, but this has been discussed several other places, here are some links.
    Pinching thread
    Here's the answer

    Here is a link that might be useful: Sashi-eda Bonsai

  • 21 years ago

    How interesting... I've only ever read and heard the exact opposite - that one should only finger pinch and not use scissors, etc.

  • 21 years ago

    Gerald,
    Trees grow up, branches grow up, It is unnatural for them to grow down and harder for them to move nurishment down. By tipping the pot over when not watering the branch on a semi cascade (hard to do with full cascade) can be leveled out or raised above the root system, in some cases, helping the tree to recover. It will also help to wire branches on a failing tree straight up for a few months until it regains strength.

  • 21 years ago

    Example:
    On black pine if you want a branch to increase vigor, wire tips UP while wiring other braches level or OUT to slow them down.

    This is part of balancing the overall health of the tree.

  • 21 years ago

    Paul, give us the answer: is it just the very tips that are brown? If so, it's not a problem of vigor,it's pinching.

  • 21 years ago

    I would bet he has not done enough pinching or opening up of the branches for sunlight and is getting some minor die off which is not a problem. Just my guess?

  • 21 years ago

    Bonsaikc
    Just the tips. I now think your right but after reading information on this forum, your links and other opinions I'm more confused about what to do than before.

    Paul

  • 21 years ago

    Tim
    I'm sorry that your email wasn't acknowledged. For some reason your email end up in junkmail.
    Paul

  • 21 years ago

    Paul:
    Thanks for following the links. This is an important aspect of juniper horticulture that is almost without exception mistaught in the U.S. I believe it is important to answer the question asked, and that is why I asked you for some clarification.

    Don't worry about it, you aren't harming your tree, only making it a little unsightly. The key with shimpaku and other junipers is to never cut or pinch the green material. Look at your branch: you have foliage out at the very tips of the branches, and if it's healthy and vigorous, you have suckers growing farther back. When your tree is overgrown, then you can work on it. In other words, feed heavily for the rest of this season. In spring you should see new shoots extending out beyond the old silhouette. When they get strong it is time to cut back your tree. You will remove the suckers and weak little bits inside that will never be a branch, but leave some healthy-looking material inside. With your scissors, cut the branch back, only cutting brown places (lignified branches) not the green. Work to make your branch send out alternating shoots, and when you have cut back the new growth (the tree will look sparse), the growth hormones will be redirected to make new growth inside. Wire your tree at this time to set the shape, and when your tree has put on a lot of new growth again, you can cut it back less harshly and arrange the new growth. You should be able to leave wire on a juniper for up to a year, if you have wired correctly.

    So the plan is, get your tree healthy and vigorous. Cut back fairly hard, wait for a lot of new growth, trim it up and arrange the branches. Never shear your tree or pinch green material. In just a couple of years you should have a nice tree.

    Chris

  • 21 years ago

    Chris and everyone,
    Thank you.
    Paul

Sponsored